Netlist

A netlist comprises of gates and nets and describes the connectivity of an electronic circuit. In hardware reverse engineering, a netlist may either be extracted from the images taken of each layer of an integrated circuit (IC) or from the bitstream of a field-programmable gate array (FPGA). The netlist itself can be interpreted as a graph with the gates representing its nodes and the nets representing their connections. Commonly, the netlist is stored as a Verilog or VHDL file. It can be parsed into HAL by using either the provided netlist parsers or writing a new one.

Furthermore, HAL provides the reverse engineer with the ability to add structure to the netlist during reversing. Therefore, modules provide an easy way for modularization and hierarchization of the design. Additionally, groupings can be used to temporarily store unordered sets of gates, nets, and modules during the reversing process.

Netlist Information

In HAL, a netlist holds its ID, the path to the file the netlist has been read from, the name of the design, and the name of the targeted device. Additionally, it holds information about the underlying gate library and keeps track of all its gates and nets. From within Python, the currently opened netlist is simply available via netlist. The ID can be retrieved using get_id and set using set_id. To get or set the path to the input file, use get_input_filename or set_input_filename respectively. Access to the design name and target device is provided by get_design_name, set_design_name, get_device_name, and set_device_name. The gate library can be retrieved using get_gate_library.

id = netlist.get_id()                     # get the id of the netlist
name = netlist.get_design_name()          # get the name of the design
netlist.set_device_name("example_chip")   # set the name of the target device
gl = netlist.get_gate_library()           # get the underlying gate library

Operating on Netlist Elements

Gates, nets, modules and groupings are technically part of the netlist and may be managed through functions provided by the netlist. These functions enable the creation, deletion, and retrieval of gates, nets, modules, and grouping. they are described in more detail below. Note that whenever an asterisk * is present within the description, the keywords gate, net, module, or grouping may be used in its place.

A new element of the netlist may be created using create_* with the parameters being different for each kind of element. Calling this function will create the respective element and assign a unique ID to it such that it can be unambiguously identified by the ID. Further, an element can be deleted from the netlist using delete_* which always takes the element itself as input. To check whether an element is part of the netlist, the function is_*_in_netlist may be used. A single element can be retrieved from the netlist by calling get_*_by_id and providing the element's unique ID. A list of elements of the same kind can be requested from the netlist using get_*s. To narrow down the returned elements, a filter may be applied in form of a lambda function.

gate_1 = netlist.create_gate(example_type, "example")                          # create a new gate of type 'example_type' going by the name 'example'
print(netlist.is_gate_in_netlist(gate_1))                                      # prints True as the gate is part of the netlist
net_1 = netlist.get_net_by_id(10)                                              # retrieves the net with ID 10 from the netlist
lut6_gates = netlist.get_gates(lambda g : g.get_type().get_name() == "LUT6")   # retrieves all gates of the gate type with name 'LUT6'
netlist.remove_module(netlist.get_module_by_id(3))                             # removes module with ID 3 from the netlist