imapd.8

NAME

imapd - The Courier IMAP server

SYNOPSIS

/usr/libexec/indimail/couriertcpd {couriertcpd options} {/usr/sbin/imaplogin} [modules...] {/usr/bin/imapd} {./Maildir}

/usr/bin/imapd {./Maildir}

DESCRIPTION

imapd is the Courier IMAP server that provides IMAP access to Maildir mailboxes. Normally you dont have to worry about it, as imapd runs automatically after receiving a network connection, accompanied by the appropriate userid and password.

couriertcpd opens network ports that receive incoming IMAP connections. After an incoming network connections is established, couriertcpd runs the command specified by its first argument, which is imaplogin passing the remaining arguments to imaplogin. imaplogin reads the IMAP login userid and password, then runs the modules specified by its remaining options, which are Courier server authentication modules described in the authlib(7)[1] manual page.

The last daisy-chained command is imapd, which is the actual IMAP server, which is started from the logged-in accounts home directory. The sole argument to imapd is the pathname to the default IMAP mailbox, which is usually ./Maildir. Some authentication modules are capable of specifying a different filename, by setting the MAILDIR environment variable.

imapd may also be invoked from the shell prompt, in which case it issues a PREAUTH response, then changes the current directory to either its argument, or the contents of the MAILDIR environment variable, then attempts to talk IMAP on standard input and output.

imapd implements IMAP4REV1, as defined by RFC 2060[2].

FILES AND ENVIRONMENT VARIABLES

AUTH*

imapd examines several environment variables whose names start with AUTH - these environment variables are set by imaplogin and the authentication modules. Their absence tells imapd that its running from the command line.

MAILDIR

MAILDIR - if defined, imapd changes its directory to the one specified by this environment variable. Otherwise imapd changes its directory to the one specified on the command line.

`pwd`/.

The current directory is assumed to be the main INBOX Maildir.

`pwd`/.folder

Maildir folders, each one containing their own tmp, new, cur, etc...

Other environment variables are initialized from the /etc/indimail/imapd and /etc/indimail/imapd-ssl configuration files. These files are loaded into the environment by the system startup script that runs couriertcpd.

Realtime concurrent folder status updates

The Courier IMAP server always allows more than one mail client to have the same folder opened. However, when two or more clients have the same folder opened, the mail clients may not necessarily know when another client added or removed messages from the folder. The base IMAP protocol specification requires IMAP mail clients to explicitly check for any changes to the folders contents. No provisions exists to notify the mail client immediately when the folders contents are modified by another mail client.

The IDLE extension to the base IMAP protocol provides a delivery mechanism for notifying mail clients of changes to the mail folders contents.

IDLE IMAP capability

IDLE must be listed in the IMAP_CAPABILITY setting in the /etc/indimail/imapd configuration file.

IMAP_USELOCKS

This setting in /etc/indimail/imapd must be enabled. This setting uses dot-lock files to synchronize updates to folder indexes between multiple IMAP clients that have the same folder opened.

This setting is safe to use with NFS, as it does not use actual file locking calls, and does not require the services of the problematic NFS lock daemon.

An IMAP mail client that fully supports the IDLE protocol extension.

Of course, an IMAP client that supports the IDLE protocol extension is required. At press time the status and extent of IDLE support in most IMAP mail clients is not known.

Without IMAP_USERLOCKS there exists a small possibility that multiple mail clients will receive a slightly inconsistent folder index if both clients try to update the contents of the folder at the same time. Usually, the worst case result is that some clients will eventually end up downloading the same message twice from the server, and caching it incorrectly in the local cache (if the IMAP client caches message contents). Clearing the local message cache will quickly eliminate any residual confusion that results from this situation.

Without inotify kernel interface, the Courier IMAP server will manually check for changes to the folders contents every 60 seconds, in IDLE mode (instead of in real time).

Verifying realtime concurrent folder status updates

Use the following procedure to verify that realtime concurrent folder status updates are properly working. It is helpful to be familiar with the IMAP protocol. If thats not the case, just be extra careful in entering the IMAP protocol commands. The following instructions describe the procedure for connecting to the IMAP server, and manually issuing IMAP protocol commands, as if they originate from an IMAP client. The following instructions use "C:" to indicate IMAP client commands that must be entered, and "S:" to indicate the expected replies from the server.

Note

The actual replies from the server may differ slightly, due to the actual server configuration, and other minor factors. The following examples have long lines wrapped for readability. Slight observed differences from the expected replies are normal, but they should still be substantively the same.

1.

Prepare a test account with a couple of messages. Open two or three terminal windows. In each window, connect to the IMAP server, and enter IDLE mode:
S:* OK Courier-IMAP ready. Copyright 1998-2021 Double Precision, Inc.
  See COPYING for distribution information.
C:a login userid password
S:a OK LOGIN Ok.
C:a SELECT INBOX
S:* FLAGS (\Draft \Answered \Flagged \Deleted \Seen \Recent)
  * OK [PERMANENTFLAGS (\Draft \Answered \Flagged \Deleted \Seen)]
    Limited
  * 2 EXISTS
  * 0 RECENT
  * OK [UIDVALIDITY 939609418] Ok
  a OK [READ-WRITE] Ok
C:a IDLE
S:+ entering ENHANCED idle mode
Note

The default Courier IMAP server configuration permits a maximum of four connections from the same IP address. It may be necessary to adjust this setting in /etc/indimail/imapd for the duration of this test.

2.

The last message from the server must be "entering ENHANCED idle mode". Otherwise, it means that some of the necessary prerequisites have not been met.

3.

Open another terminal window, connect to the server, and modify the flags of one of the messages:

S:* OK Courier-IMAP ready. Copyright 1998-2021 Double Precision, Inc.
  See COPYING for distribution information.
C:a login userid password
S:a OK LOGIN Ok.
C:a SELECT INBOX
S:* FLAGS (\Draft \Answered \Flagged \Deleted \Seen \Recent)
  * OK [PERMANENTFLAGS (\Draft \Answered \Flagged \Deleted \Seen)]
    Limited
  * 2 EXISTS
  * 0 RECENT
  * OK [UIDVALIDITY 939609418] Ok
  a OK [READ-WRITE] Ok
C:STORE 1 +FLAGS (\Deleted)
* 1 FETCH (FLAGS (\Deleted))
a OK STORE completed.

4.

The last command sets the \Deleted flag on the first message in the folder. Immediately after entering the last command, "* 1 FETCH (FLAGS (\Deleted))" should also appear in all other terminal windows.

5.

Verify that all terminal windows reliably receive folder status updates in real time by alternatively entering the commands "a STORE 1 -FLAGS (\Deleted)" and "a STORE 1 +FLAGS (\Deleted)", to toggle the deleted flag on the first message. Observe that the message is received by all terminal windows quickly, and reliably.

6.

With the \Deleted flag set on the first message, enter the EXPUNGE command, which removes the deleted message from the folder:
C:a EXPUNGE
S:* 1 EXPUNGE
  * 2 EXISTS
  * 0 RECENT
S:a OK EXPUNGE completed
The lines that begin with the "*" character should also appear in all other terminal windows (depending on the initial folder state one of the terminal windows may have a different RECENT message, which is fine).

7.

Use a mail client to create and send a test message to the test account. As soon as the mail server delivers the message, the following messages should appear in every terminal window:
* 3 EXISTS
* 0 RECENT
* 3 FETCH (FLAGS ())
The numbers in these messages may be different, depending upon the initial contents of the test mail folder. One of the terminal windows should have a different RECENT count, and one of the terminal windows should include a \Recent flag in the untagged FLAGS message. These difference are acceptable; the important thing is to make sure that all terminal windows have the same EXISTS message.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly