Skip to content
Mill Continuous Integration

New BundleMap #595

Sign in to view logs

New BundleMap

New BundleMap #595

Triggered via pull request July 27, 2023 06:33
@sequencersequencer
synchronize #3419
new_bundle_map
Status Cancelled
Total duration 16m 56s
Artifacts –

mill-ci.yml

on: pull_request
Matrix: emulator
Matrix: jtag-dtm-test
Matrix: riscv-arch-test
Matrix: riscv-tests
Fit to window
Zoom out
Zoom in

Annotations

38 errors and 137 warnings
riscv-arch-test (DefaultConfig,64,RV64IMACZicsr_Zifencei)
The run was canceled by @sequencer.
riscv-arch-test (BitManipCrypto32Config,32,RV32IZba_Zbb_Zbc_Zbkb_Zbkc_Zbkx_Zbs_Zknd_Zkne_Zknh_Zks...
The run was canceled by @sequencer.
riscv-arch-test (BitManipCryptoConfig,64,RV64IZba_Zbb_Zbc_Zbkb_Zbkc_Zbkx_Zbs_Zknd_Zkne_Zknh_Zksed...
The run was canceled by @sequencer.
riscv-arch-test (DefaultRV32Config,32,RV32IMACZicsr_Zifencei)
The run was canceled by @sequencer.
riscv-tests (TinyConfig)
The operation was canceled.
riscv-tests (DefaultBufferlessConfig)
The operation was canceled.
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.DefaultR...
The operation was canceled.
emulator (DualChannelConfig)
The operation was canceled.
riscv-tests (DefaultFP16Config)
The operation was canceled.
emulator (DualChannelDualBankConfig)
The operation was canceled.
emulator (EightChannelConfig)
The operation was canceled.
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.WithDebu...
The operation was canceled.
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.WithDebu...
The operation was canceled.
emulator (CloneTileConfig)
The operation was canceled.
emulator (QuadChannelBenchmarkConfig)
The operation was canceled.
emulator (DualBankConfig)
The operation was canceled.
emulator (Edge128BitConfig)
The operation was canceled.
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.DefaultC...
The operation was canceled.
riscv-tests (DefaultRV32Config)
The operation was canceled.
emulator (DefaultSmallConfig)
The operation was canceled.
emulator (Edge32BitConfig)
The operation was canceled.
emulator (HypervisorConfig)
The operation was canceled.
riscv-tests (DefaultConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
riscv-tests (DefaultConfig)
The operation was canceled.
emulator (RoccExampleConfig)
The operation was canceled.
riscv-tests (DefaultRV32Config): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (DualCoreConfig)
The operation was canceled.
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.DefaultC...: .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (MMIOPortOnlyConfig)
The operation was canceled.
emulator (DefaultSmallConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (MemPortOnlyConfig)
The operation was canceled.
emulator (RoccExampleConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (Edge128BitConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (Edge32BitConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (DualCoreConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (MemPortOnlyConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (MMIOPortOnlyConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
emulator (HypervisorConfig): .github/workflows/mill-ci.yml#L1
This run was manually canceled.
riscv-tests (TinyConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (TinyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultBufferlessConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.DefaultR...
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DualChannelConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultFP16Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualChannelDualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (EightChannelConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.WithDebu...
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.WithDebu...
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (CloneTileConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (CloneTileConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (QuadChannelBenchmarkConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualBankConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge128BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
jtag-dtm-test (freechips.rocketchip.system.WithJtagDTMSystem_freechips.rocketchip.system.DefaultC...
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
riscv-tests (DefaultRV32Config)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultRV32Config)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DefaultSmallConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (Edge32BitConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (HypervisorConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (RoccExampleConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (RoccExampleConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
riscv-tests (DefaultConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (DualCoreConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MMIOPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, coursier/cache-action@v5. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
emulator (MemPortOnlyConfig)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/