Quandify CubicMeter 1.1 support

lib/payload.json

@@ -152,7 +152,7 @@
           "type": "object",
           "properties": {
             "leak": {
-              "type": "boolean",
+              "type": ["boolean", "string"],
               "description": "Leak detected"
             }
           },

vendor/quandify/cubicmeter-1-1-copper-codec.yaml

@@ -0,0 +1,4 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: cubicmeter-1-1-uplink.js

vendor/quandify/cubicmeter-1-1-copper.yaml

@@ -0,0 +1,122 @@
+name: CubicMeter 1.1 Copper
+description: Non-invasive water meter and leakage sensor
+
+# Hardware versions (optional)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Supported hardware versions (optional)
+    hardwareVersions:
+      - '1.0' # Must refer to hardwareVersions declared above
+    # LoRaWAN Device Profiles per region
+    # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: cubicmeter-1-1-profile-eu868
+        lorawanCertified: true
+        codec: cubicmeter-1-1-copper-codec
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - battery
+  - temperature
+  - water
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+#   -
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog.
+# bridgeInterfaces:
+#  -
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 39
+  length: 86
+  height: 82
+
+# Weight in grams (optional)
+weight: 260
+
+# Battery information (optional)
+battery:
+  replaceable: false
+  type: 3.6V Li-SOCI2
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: 5
+    max: 30
+  # Relative humidity (fraction of 1)
+  # relativeHumidity:
+  #   min:
+  #   max:
+
+# IP rating (optional)
+# ipCode:
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+# keyProvisioning:
+#  -
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+# keyProgramming:
+#   -
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+# keySecurity:
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+# firmwareProgramming:
+#  -
+
+# Product and data sheet URLs (optional)
+productURL: https://quandify.com/cubicmeter
+# dataSheetURL:
+
+# Photos (MAKE SURE THE IMAGE HAS A TRANSPARENT BACKGROUND)
+photos:
+  main: cubicmeter-1-1-copper.png
+# Youtube or Vimeo Video (optional)
+# videos:
+#   main:
+
+# Regulatory compliances (optional)
+# compliances:
+#   safety:
+#     - body:
+#       norm:
+#       standard:
+#   radioEquipment:
+#     - body:
+#       norm:
+#       standard:
+#       version:
+#     - body:
+#       norm:
+#       standard:
+#       version:

vendor/quandify/cubicmeter-1-1-plastic-codec.yaml

@@ -0,0 +1,4 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: cubicmeter-1-1-uplink.js

vendor/quandify/cubicmeter-1-1-plastic.yaml

@@ -0,0 +1,122 @@
+name: CubicMeter 1.1 Plastic
+description: Non-invasive water meter and leakage sensor
+
+# Hardware versions (optional)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Supported hardware versions (optional)
+    hardwareVersions:
+      - '1.0' # Must refer to hardwareVersions declared above
+    # LoRaWAN Device Profiles per region
+    # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870
+    profiles:
+      EU863-870:
+        id: cubicmeter-1-1-profile-eu868
+        lorawanCertified: true
+        codec: cubicmeter-1-1-plastic-codec
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - battery
+  - temperature
+  - water
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+#   -
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog.
+# bridgeInterfaces:
+#  -
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 39
+  length: 86
+  height: 82
+
+# Weight in grams (optional)
+weight: 260
+
+# Battery information (optional)
+battery:
+  replaceable: false
+  type: 3.6V Li-SOCI2
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: 5
+    max: 30
+  # Relative humidity (fraction of 1)
+  # relativeHumidity:
+  #   min:
+  #   max:
+
+# IP rating (optional)
+# ipCode:
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+# keyProvisioning:
+#  -
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+# keyProgramming:
+#   -
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+# keySecurity:
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+# firmwareProgramming:
+#  -
+
+# Product and data sheet URLs (optional)
+productURL: https://quandify.com/cubicmeter
+# dataSheetURL:
+
+# Photos (MAKE SURE THE IMAGE HAS A TRANSPARENT BACKGROUND)
+photos:
+  main: cubicmeter-1-1-plastic.png
+# Youtube or Vimeo Video (optional)
+# videos:
+#   main:
+
+# Regulatory compliances (optional)
+# compliances:
+#   safety:
+#     - body:
+#       norm:
+#       standard:
+#   radioEquipment:
+#     - body:
+#       norm:
+#       standard:
+#       version:
+#     - body:
+#       norm:
+#       standard:
+#       version:

vendor/quandify/cubicmeter-1-1-profile-eu868.yaml

@@ -0,0 +1,47 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.2
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.2-RevB
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60