zephyrproject-rtos · carlescufi · Sep 23, 2024 · Sep 16, 2024 · Sep 16, 2024 · Sep 16, 2024
diff --git a/boards/adafruit/feather_m0_basic_proto/doc/index.rst b/boards/adafruit/feather_m0_basic_proto/doc/index.rst
@@ -96,7 +96,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/adafruit/feather_m0_lora/doc/index.rst b/boards/adafruit/feather_m0_lora/doc/index.rst
@@ -99,7 +99,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/adafruit/grand_central_m4_express/doc/index.rst b/boards/adafruit/grand_central_m4_express/doc/index.rst
@@ -98,7 +98,7 @@ USB Device Port
 ===============
 
 The SAMD51 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/adafruit/itsybitsy_m4_express/doc/index.rst b/boards/adafruit/itsybitsy_m4_express/doc/index.rst
@@ -106,7 +106,7 @@ USB Device Port
 ===============
 
 The SAMD51 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/adafruit/trinket_m0/doc/index.rst b/boards/adafruit/trinket_m0/doc/index.rst
@@ -98,7 +98,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/arduino/mkrzero/doc/index.rst b/boards/arduino/mkrzero/doc/index.rst
@@ -111,7 +111,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/arduino/nano_33_iot/doc/index.rst b/boards/arduino/nano_33_iot/doc/index.rst
@@ -102,7 +102,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/arduino/zero/doc/index.rst b/boards/arduino/zero/doc/index.rst
@@ -98,7 +98,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/espressif/esp32_devkitc_wroom/doc/index.rst b/boards/espressif/esp32_devkitc_wroom/doc/index.rst
@@ -54,7 +54,7 @@ Asymmetric Multiprocessing (AMP)
 ********************************
 
 ESP32-DevKitC-WROOM allows 2 different applications to be executed in ESP32 SoC. Due to its dual-core architecture, each core can be enabled to execute customized tasks in stand-alone mode
-and/or exchanging data over OpenAMP framework. See :ref:`ipc_samples` folder as code reference.
+and/or exchanging data over OpenAMP framework. See :zephyr:code-sample-category:`ipc` folder as code reference.
 
 Supported Features
 ==================

diff --git a/boards/espressif/esp32_devkitc_wrover/doc/index.rst b/boards/espressif/esp32_devkitc_wrover/doc/index.rst
@@ -54,7 +54,7 @@ Asymmetric Multiprocessing (AMP)
 ********************************
 
 ESP32-DevKitC-WROVER allows 2 different applications to be executed in ESP32 SoC. Due to its dual-core architecture, each core can be enabled to execute customized tasks in stand-alone mode
-and/or exchanging data over OpenAMP framework. See :ref:`ipc_samples` folder as code reference.
+and/or exchanging data over OpenAMP framework. See :zephyr:code-sample-category:`ipc` folder as code reference.
 
 Supported Features
 ==================

diff --git a/boards/espressif/esp32s3_devkitc/doc/index.rst b/boards/espressif/esp32s3_devkitc/doc/index.rst
@@ -76,7 +76,7 @@ Asymmetric Multiprocessing (AMP)
 
 ESP32S3-DevKitC allows 2 different applications to be executed in ESP32-S3 SoC. Due to its dual-core
 architecture, each core can be enabled to execute customized tasks in stand-alone mode
-and/or exchanging data over OpenAMP framework. See :ref:`ipc_samples` folder as code reference.
+and/or exchanging data over OpenAMP framework. See :zephyr:code-sample-category:`ipc` folder as code reference.
 
 For more information, check the datasheet at `ESP32-S3 Datasheet`_ or the technical reference
 manual at `ESP32-S3 Technical Reference Manual`_.

diff --git a/boards/espressif/esp32s3_devkitm/doc/index.rst b/boards/espressif/esp32s3_devkitm/doc/index.rst
@@ -76,7 +76,7 @@ Asymmetric Multiprocessing (AMP)
 
 ESP32S3-DevKitM allows 2 different applications to be executed in ESP32-S3 SoC. Due to its dual-core
 architecture, each core can be enabled to execute customized tasks in stand-alone mode
-and/or exchanging data over OpenAMP framework. See :ref:`ipc_samples` folder as code reference.
+and/or exchanging data over OpenAMP framework. See :zephyr:code-sample-category:`ipc` folder as code reference.
 
 For more information, check the datasheet at `ESP32-S3 Datasheet`_ or the technical reference
 manual at `ESP32-S3 Technical Reference Manual`_.

diff --git a/boards/openisa/rv32m1_vega/doc/index.rst b/boards/openisa/rv32m1_vega/doc/index.rst
@@ -578,7 +578,7 @@ toolchain and OpenOCD::
    You need to make sure this happens every time you use this board.
 
 Now let's compile the :zephyr:code-sample:`hello_world` application. (You can try
-others as well; see :ref:`samples-and-demos` for more.)
+others as well; see :zephyr:code-sample-category:`samples` for more.)
 
 .. We can't use zephyr-app-commands to provide build instructions
    due to the below mentioned linker issue.

diff --git a/boards/others/serpente/doc/index.rst b/boards/others/serpente/doc/index.rst
@@ -74,7 +74,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which prints "Hello World!"
 to the host PC.
 

diff --git a/boards/seeed/seeeduino_xiao/doc/index.rst b/boards/seeed/seeeduino_xiao/doc/index.rst
@@ -98,7 +98,7 @@ USB Device Port
 ===============
 
 The SAMD21 MCU has a USB device port that can be used to communicate
-with a host PC.  See the :ref:`usb-samples` sample applications for
+with a host PC.  See the :zephyr:code-sample-category:`usb` sample applications for
 more, such as the :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual
 serial port that echos characters back to the host PC.
 

diff --git a/boards/seeed/wio_terminal/doc/index.rst b/boards/seeed/wio_terminal/doc/index.rst
@@ -121,7 +121,7 @@ USB Device Port
 ===============
 
 The SAMD51 MCU has a USB device port that can be used to communicate with a
-host PC.  See the :ref:`usb-samples` sample applications for more, such as the
+host PC.  See the :zephyr:code-sample-category:`usb` sample applications for more, such as the
 :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual serial port that echos
 characters back to the host PC.
 

diff --git a/boards/shields/npm1300_ek/doc/index.rst b/boards/shields/npm1300_ek/doc/index.rst
@@ -22,7 +22,7 @@ Usage
 *****
 
 The shield can be used in any application by setting ``--shield npm1300_ek``
-when invoking ``west build``. You can check :ref:`npm1300_ek_sample` for a
+when invoking ``west build``. You can check :zephyr:code-sample:`npm1300_ek` for a
 comprehensive sample.
 
 References

diff --git a/boards/shields/npm6001_ek/doc/index.rst b/boards/shields/npm6001_ek/doc/index.rst
@@ -28,7 +28,7 @@ Usage
 *****
 
 The shield can be used in any application by setting ``--shield npm6001_ek``
-when invoking ``west build``. You can check :ref:`npm6001_ek_sample` for a
+when invoking ``west build``. You can check :zephyr:code-sample:`npm6001_ek` for a
 comprehensive sample.
 
 References

diff --git a/boards/snps/hsdk/doc/index.rst b/boards/snps/hsdk/doc/index.rst
@@ -387,9 +387,9 @@ Set up Zephyr Software
 Building Sample Applications
 ==============================
 
-You can try many of the :ref:`sample applications and demos
-<samples-and-demos>`.  We'll use :zephyr:code-sample:`hello_world`, found in
-:zephyr_file:`samples/hello_world` as an example.
+You can try many of the :zephyr:code-sample-category:`sample applications and demos <samples>`.
+We'll use :zephyr:code-sample:`hello_world`, found in :zephyr_file:`samples/hello_world` as an
+example.
 
 Configuring
 -----------

diff --git a/boards/snps/hsdk4xd/doc/index.rst b/boards/snps/hsdk4xd/doc/index.rst
@@ -384,9 +384,8 @@ Set up Zephyr Software
 Building Sample Applications
 ==============================
 
-You can try many of the :ref:`sample applications and demos
-<samples-and-demos>`.  We'll use :zephyr:code-sample:`hello_world`, found in
-:zephyr_file:`samples/hello_world` as an example.
+You can try many of the :zephyr:code-sample-category:`sample applications and demos <samples>`.
+We'll use :zephyr:code-sample:`hello_world`, found in :zephyr_file:`samples/hello_world` as an example.
 
 Configuring
 -----------

diff --git a/boards/waveshare/esp32s3_touch_lcd_1_28/doc/index.rst b/boards/waveshare/esp32s3_touch_lcd_1_28/doc/index.rst
@@ -52,7 +52,7 @@ Asymmetric Multiprocessing (AMP)
 
 ESP32-S3 allows 2 different applications to be executed in ESP32-S3 SoC. Due to its dual-core
 architecture, each core can be enabled to execute customized tasks in stand-alone mode
-and/or exchanging data over OpenAMP framework. See :ref:`ipc_samples` folder as code reference.
+and/or exchanging data over OpenAMP framework. See :zephyr:code-sample-category:`ipc` folder as code reference.
 
 For more information, check the datasheet at `ESP32-S3 Datasheet`_ or the technical reference
 manual at `ESP32-S3 Technical Reference Manual`_.