drivers: add SSD1327 display controller driver

Implements the driver for the OLED SSD1327 controller. This driver is based on the ssd1306 driver due to their similarities. Only the SPI control bus is supported. Signed-off-by: Luc BEAUFILS <[email protected]>
zephyrproject-rtos · Aug 17, 2024 · ad3e941 · ad3e941
1 parent 88c7a21
commit ad3e941
Show file tree

Hide file tree

Showing 6 changed files with 475 additions and 0 deletions.
diff --git a/drivers/display/CMakeLists.txt b/drivers/display/CMakeLists.txt
@@ -16,6 +16,7 @@ zephyr_library_sources_ifdef(CONFIG_LS0XX		ls0xx.c)
 zephyr_library_sources_ifdef(CONFIG_MAX7219		display_max7219.c)
 zephyr_library_sources_ifdef(CONFIG_OTM8009A		display_otm8009a.c)
 zephyr_library_sources_ifdef(CONFIG_SSD1306		ssd1306.c)
+zephyr_library_sources_ifdef(CONFIG_SSD1327		ssd1327.c)
 zephyr_library_sources_ifdef(CONFIG_SSD16XX		ssd16xx.c)
 zephyr_library_sources_ifdef(CONFIG_ST7789V		display_st7789v.c)
 zephyr_library_sources_ifdef(CONFIG_ST7735R		display_st7735r.c)

diff --git a/drivers/display/Kconfig b/drivers/display/Kconfig
@@ -26,6 +26,7 @@ source "drivers/display/Kconfig.nrf_led_matrix"
 source "drivers/display/Kconfig.ili9xxx"
 source "drivers/display/Kconfig.sdl"
 source "drivers/display/Kconfig.ssd1306"
+source "drivers/display/Kconfig.ssd1327"
 source "drivers/display/Kconfig.ssd16xx"
 source "drivers/display/Kconfig.st7735r"
 source "drivers/display/Kconfig.st7789v"

diff --git a/drivers/display/Kconfig.ssd1327 b/drivers/display/Kconfig.ssd1327
@@ -0,0 +1,23 @@
+# SSD1327 display controller configuration options
+
+# Copyright (c) 2024 Savoir-faire Linux
+# SPDX-License-Identifier: Apache-2.0
+
+menuconfig SSD1327
+	bool "SSD1327 display driver"
+	default y
+	depends on DT_HAS_SOLOMON_SSD1327FB_ENABLED
+	select MIPI_DBI
+	help
+	  Enable driver for SSD1327 display.
+
+if SSD1327
+
+config SSD1327_DEFAULT_CONTRAST
+	int "SSD1327 default contrast"
+	default 128
+	range 0 255
+	help
+	  SSD1327 default contrast.
+
+endif # SSD1327
diff --git a/drivers/display/ssd1327.c b/drivers/display/ssd1327.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (c) 2024 Savoir-faire Linux
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/logging/log.h>
+LOG_MODULE_REGISTER(ssd1327, CONFIG_DISPLAY_LOG_LEVEL);
+
+#include <string.h>
+#include <zephyr/device.h>
+#include <zephyr/init.h>
+#include <zephyr/drivers/display.h>
+#include <zephyr/drivers/gpio.h>
+#include <zephyr/drivers/mipi_dbi.h>
+#include <zephyr/kernel.h>
+
+#include "ssd1327_regs.h"
+
+#define SSD1327_ENABLE_VDD				0x01
+#define SSD1327_ENABLE_SECOND_PRECHARGE			0x62
+#define SSD1327_VCOMH_VOLTAGE				0x0f
+#define SSD1327_PHASES_VALUE				0xf1
+#define SSD1327_DEFAULT_PRECHARGE_V			0x08
+#define SSD1327_UNLOCK_COMMAND				0x12
+
+struct ssd1327_config {
+	const struct device *mipi_dev;
+	const struct mipi_dbi_config dbi_config;
+	uint16_t height;
+	uint16_t width;
+	uint8_t oscillator_freq;
+	uint8_t start_line;
+	uint8_t display_offset;
+	uint8_t multiplex_ratio;
+	uint8_t prechargep;
+	uint8_t remap_value;
+	bool color_inversion;
+};
+
+struct ssd1327_data {
+	uint8_t contrast;
+	uint8_t scan_mode;
+};
+
+static inline int ssd1327_write_bus_cmd(const struct device *dev, const uint8_t cmd,
+					const uint8_t *data, size_t len)
+{
+	const struct ssd1327_config *config = dev->config;
+	int err;
+
+	/* Values given after the memory register must be sent with pin D/C set to 0. */
+	/* Data is sent as a command following the mipi_cbi api */
+	err = mipi_dbi_command_write(config->mipi_dev, &config->dbi_config, cmd, NULL, 0);
+	if (err) {
+		return err;
+	}
+	for (size_t i = 0; i < len; i++) {
+		err = mipi_dbi_command_write(config->mipi_dev, &config->dbi_config,
+					     data[i], NULL, 0);
+		if (err) {
+			return err;
+		}
+	}
+	mipi_dbi_release(config->mipi_dev, &config->dbi_config);
+
+	return 0;
+}
+
+static inline int ssd1327_set_timing_setting(const struct device *dev)
+{
+	const struct ssd1327_config *config = dev->config;
+	uint8_t buf;
+
+	buf = SSD1327_PHASES_VALUE;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_PHASE_LENGTH, &buf, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_OSC_FREQ, &config->oscillator_freq, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_PRECHARGE_PERIOD, &config->prechargep, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_LINEAR_LUT, NULL, 0)) {
+		return -EIO;
+	}
+	buf = SSD1327_DEFAULT_PRECHARGE_V;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_PRECHARGE_VOLTAGE, &buf, 1)) {
+		return -EIO;
+	}
+	buf = SSD1327_VCOMH_VOLTAGE;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_VCOMH, &buf, 1)) {
+		return -EIO;
+	}
+	buf = SSD1327_ENABLE_SECOND_PRECHARGE;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_FUNCTION_SELECTION_B, &buf, 1)) {
+		return -EIO;
+	}
+	buf = SSD1327_UNLOCK_COMMAND;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_COMMAND_LOCK, &buf, 1)) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static inline int ssd1327_set_hardware_config(const struct device *dev)
+{
+	const struct ssd1327_config *config = dev->config;
+	uint8_t buf;
+
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_DISPLAY_START_LINE, &config->start_line, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_DISPLAY_OFFSET, &config->display_offset, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_NORMAL_DISPLAY, NULL, 0)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_SEGMENT_MAP_REMAPED, &config->remap_value, 1)) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_MULTIPLEX_RATIO, &config->multiplex_ratio, 1)) {
+		return -EIO;
+	}
+	buf = SSD1327_ENABLE_VDD;
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_FUNCTION_A, &buf, 1)) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int ssd1327_resume(const struct device *dev)
+{
+	return ssd1327_write_bus_cmd(dev, SSD1327_DISPLAY_ON, NULL, 0);
+}
+
+static int ssd1327_suspend(const struct device *dev)
+{
+	return ssd1327_write_bus_cmd(dev, SSD1327_DISPLAY_OFF, NULL, 0);
+}
+
+static int ssd1327_set_display(const struct device *dev)
+{
+	const struct ssd1327_config *config = dev->config;
+	uint8_t x_position[] = {
+		0,
+		config->width - 1
+	};
+	uint8_t y_position[] = {
+		0,
+		config->height - 1
+	};
+
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_COLUMN_ADDR, x_position, sizeof(x_position))) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_ROW_ADDR, y_position, sizeof(y_position))) {
+		return -EIO;
+	}
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_SEGMENT_MAP_REMAPED, &config->remap_value, 1)) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int ssd1327_write(const struct device *dev, const uint16_t x, const uint16_t y,
+			 const struct display_buffer_descriptor *desc, const void *buf)
+{
+	const struct ssd1327_config *config = dev->config;
+	struct display_buffer_descriptor mipi_desc;
+	int err;
+	size_t buf_len;
+	uint8_t x_position[] = { x, x + desc->width - 1 };
+	uint8_t y_position[] = { y, y + desc->height - 1 };
+
+	if (desc->pitch < desc->width) {
+		LOG_ERR("Pitch is smaller than width");
+		return -1;
+	}
+	mipi_desc.pitch = desc->pitch;
+
+	/* Following the datasheet, in the GDDRAM, two segment are split in one register */
+	buf_len = MIN(desc->buf_size, desc->height * desc->width / 2);
+	if (buf == NULL || buf_len == 0U) {
+		LOG_ERR("Display buffer is not available");
+		return -1;
+	}
+	mipi_desc.buf_size = buf_len;
+
+	if (desc->pitch > desc->width) {
+		LOG_ERR("Unsupported mode");
+		return -1;
+	}
+
+	if ((y & 0x7) != 0U) {
+		LOG_ERR("Unsupported origin");
+		return -1;
+	}
+	mipi_desc.height = desc->height;
+	mipi_desc.width = desc->width;
+
+	LOG_DBG("x %u, y %u, pitch %u, width %u, height %u, buf_len %u", x, y, desc->pitch,
+		desc->width, desc->height, buf_len);
+
+	err = ssd1327_write_bus_cmd(dev, SSD1327_SET_COLUMN_ADDR, x_position, sizeof(x_position));
+	if (err) {
+		return err;
+	}
+
+	err = ssd1327_write_bus_cmd(dev, SSD1327_SET_ROW_ADDR, y_position, sizeof(y_position));
+	if (err) {
+		return err;
+	}
+
+	err = mipi_dbi_write_display(config->mipi_dev, &config->dbi_config, buf, &mipi_desc,
+				     PIXEL_FORMAT_MONO10);
+	if (err) {
+		return err;
+	}
+	return mipi_dbi_release(config->mipi_dev, &config->dbi_config);
+}
+
+static int ssd1327_set_contrast(const struct device *dev, const uint8_t contrast)
+{
+	return ssd1327_write_bus_cmd(dev, SSD1327_SET_CONTRAST_CTRL, &contrast, 1);
+}
+
+static void ssd1327_get_capabilities(const struct device *dev,
+				     struct display_capabilities *caps)
+{
+	const struct ssd1327_config *config = dev->config;
+
+	memset(caps, 0, sizeof(struct display_capabilities));
+	caps->x_resolution = config->width;
+	caps->y_resolution = config->height;
+	caps->supported_pixel_formats = PIXEL_FORMAT_MONO10;
+	caps->current_pixel_format = PIXEL_FORMAT_MONO10;
+	caps->screen_info = SCREEN_INFO_MONO_VTILED;
+}
+
+static int ssd1327_set_pixel_format(const struct device *dev,
+				    const enum display_pixel_format pf)
+{
+	if (pf == PIXEL_FORMAT_MONO10) {
+		return 0;
+	}
+	LOG_ERR("Unsupported pixel format");
+	return -ENOTSUP;
+}
+
+static int ssd1327_init_device(const struct device *dev)
+{
+	const struct ssd1327_config *config = dev->config;
+	uint8_t buf;
+
+	/* Turn display off */
+	if (ssd1327_suspend(dev)) {
+		return -EIO;
+	}
+
+	if (ssd1327_set_display(dev)) {
+		return -EIO;
+	}
+
+	if (ssd1327_set_contrast(dev, CONFIG_SSD1327_DEFAULT_CONTRAST)) {
+		return -EIO;
+	}
+
+	if (ssd1327_set_hardware_config(dev)) {
+		return -EIO;
+	}
+
+	buf = (config->color_inversion ?
+	       SSD1327_SET_REVERSE_DISPLAY : SSD1327_SET_NORMAL_DISPLAY);
+	if (ssd1327_write_bus_cmd(dev, SSD1327_SET_ENTIRE_DISPLAY_OFF, &buf, 1)) {
+		return -EIO;
+	}
+
+	if (ssd1327_set_timing_setting(dev)) {
+		return -EIO;
+	}
+
+	if (ssd1327_resume(dev)) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int ssd1327_init(const struct device *dev)
+{
+	const struct ssd1327_config *config = dev->config;
+
+	LOG_DBG("Initializing device");
+
+	if (!device_is_ready(config->mipi_dev)) {
+		LOG_ERR("MIPI Device not ready!");
+		return -EINVAL;
+	}
+
+	if (mipi_dbi_reset(config->mipi_dev, SSD1327_RESET_DELAY)) {
+		LOG_ERR("Failed to reset device!");
+		return -EIO;
+	}
+	k_msleep(SSD1327_RESET_DELAY);
+
+	if (ssd1327_init_device(dev)) {
+		LOG_ERR("Failed to initialize device!");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static struct display_driver_api ssd1327_driver_api = {
+	.blanking_on = ssd1327_suspend,
+	.blanking_off = ssd1327_resume,
+	.write = ssd1327_write,
+	.set_contrast = ssd1327_set_contrast,
+	.get_capabilities = ssd1327_get_capabilities,
+	.set_pixel_format = ssd1327_set_pixel_format,
+};
+
+#define SSD1327_DEFINE(node_id)                                                                    \
+	static struct ssd1327_data data##node_id;                                                  \
+	static const struct ssd1327_config config##node_id = {                                     \
+		.mipi_dev = DEVICE_DT_GET(DT_PARENT(node_id)),                                     \
+		.dbi_config = { .mode = MIPI_DBI_MODE_SPI_4WIRE,                                   \
+				.config = MIPI_DBI_SPI_CONFIG_DT(node_id,                          \
+							SPI_OP_MODE_MASTER | SPI_WORD_SET(8) |     \
+							SPI_HOLD_ON_CS | SPI_LOCK_ON, 0),          \
+				},                                                                 \
+		.height = DT_PROP(node_id, height),                                                \
+		.width = DT_PROP(node_id, width),                                                  \
+		.oscillator_freq = DT_PROP(node_id, oscillator_freq),                              \
+		.display_offset = DT_PROP(node_id, display_offset),                                \
+		.start_line = DT_PROP(node_id, start_line),                                        \
+		.multiplex_ratio = DT_PROP(node_id, multiplex_ratio),                              \
+		.prechargep = DT_PROP(node_id, prechargep),                                        \
+		.remap_value = DT_PROP(node_id, remap_value),                                      \
+		.color_inversion = DT_PROP(node_id, inversion_on),                                 \
+	};                                                                                         \
+                                                                                                   \
+	DEVICE_DT_DEFINE(node_id, ssd1327_init, NULL, &data##node_id, &config##node_id,            \
+			 POST_KERNEL, CONFIG_DISPLAY_INIT_PRIORITY, &ssd1327_driver_api);
+
+DT_FOREACH_STATUS_OKAY(solomon_ssd1327fb, SSD1327_DEFINE)