Snapshot build (github240830)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github240615...github240830
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/330ed1cc/CHANGELOG.md#1180-snapshot-build-2024-08-30

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Snapshot build (github240615)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github230330...github240615
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/ad49759/CHANGELOG.md#1160-dev-snapshot-build-2024-06-15

Build from source

PlatformIO: https://github.com/xoseperez/espurna/wiki/PlatformIO
Arduino IDE: https://github.com/xoseperez/espurna/wiki/ArduinoIDE

Snapshot build (github230330)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github230112...github230330
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github230330/CHANGELOG.md

Snapshot build (github230112)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221212...github230112
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/dev/CHANGELOG.md#1150-dev-snapshot-build-2023-01-12

Snapshot build (github221212)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221204...github221212
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/dev/CHANGELOG.md#1150-dev-snapshot-build-2022-12-12

Snapshot build (github221204)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github221116...github221204
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github221204/CHANGELOG.md

Snapshot build (github221116)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github220925...github221116
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github221116/CHANGELOG.md

Snapshot build (github220925)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github220923...github220925
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github220925/CHANGELOG.md

Snapshot build (github220923)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Latest changes: github220830...github220923
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github220923/CHANGELOG.md

Snapshot build (github220830)

IMPORTANT NOTICE

When updating from 1.14.1 make sure there is enough available space on the device (usually, "available space" rounded to the nearest 4096 byte increment) to perform the OTA upgrade. Telnet and direct HTTP upgrades with an .bin too big will result in a bricked device. espota.py and Web Interface upgrades will issue a warning.

Make sure to only perform OTA upgrade with a properly powered device. Attempting to flash and / or use a normally AC powered device (like a Sonoff) instead powered through 3v3 may result in unexpected issues with the firmware.

Snapshot build

How to upgrade "over-the-air" aka OTA: https://github.com/xoseperez/espurna/wiki/OTA
Full Changelog: github20220819...github220830
CHANGELOG.md: https://github.com/xoseperez/espurna/blob/github220830/CHANGELOG.md