Ameba Arduino SDK (ambd_arduino)

1. About dev & master branch

Branch	Usage	json links
master	stable release	https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json
dev	merge Pull Request & early release	https://github.com/ambiot/ambd_arduino/raw/dev/Arduino_package/package_realtek_amebad_early_index.json

For all release information, please visit this link.

2. How to add Realtek Ameba Arduino package to Arduino IDE:

You can refer to this link to get started: http://www.amebaiot.com/ameba-arduino-getting-started/ , or follow the steps below.

1. Add Ameba Arduino SDK link to Arduino IDE Additional Boards Manager

   Arduino IDE 1.6.5 and above versions support third party hardware so please make sure to use the latest Arduino IDE for better experience.

   Therefore, you need to add Ameba Arduino SDK link in

   "File" -> "Preferences" -> "Additional Boards Manager URLs:"

   Copy and paste the following link into the field and click "OK",

   https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json

   We also suggest to enable "Show verbose output" options on "compilation" and "upload" in Preference for easier debugging.

   
   

2. Install Ameba board in "Board Manager"

   Open "Tools" -> "Board" -> "Board Manager", wait for it to update additional hardware configurations, then type "ameba" in the search bar, you will see Realtek Ameba in the list.

   Press "Install" to start the installation.

   
   

3. Select your Ameba model in "Tools" -> "Board" -> "AmebaD ARM (32-bits) Boards"

   Make sure you select the correct model for your board, otherwise your program might not work properly

   Now you are ready to develop and upload firmware onto Ameba.

   For more information, please refer to https://www.amebaiot.com/en/ameba-arduino-summary/

   
   

3. Contributing to Ameba

Please spend 5 mins to read the Coding Style and Contribution Guideline at here before you contribute.