add cpp cmd ownership page

source/docs/software/commandbased/cpp-command-ownership.rst

@@ -0,0 +1,141 @@
+C++ Command Ownership Model
+===========================
+
+C++ Ownership Scope Semantics
+-----------------------------
+
+Unlike languages (such as Java and Python) that hide memory management from the programmer, C++ programmers must be conscious of memory management and object lifetimes.
+
+When allocating on the stack, as following, the object is destroyed when it goes out of scope. In this case, ``x`` is destroyed when ``MyFunction`` returns:
+
+.. code-block:: c++
+
+   int* MyFunction() {
+     int x = 3;
+     // ...
+     return &x; // invalid pointer -- using it will crash/"segfault"!!!
+   } // x is destroyed here!
+
+Thus, it is important to store objects in the correct scope so they aren't destroyed while they're used -- this causes a whole category of C++ bugs called "use after free".
+
+Allocating on the heap (with ``new``) persists the object beyond the variable scope, but then the object must be destroyed manually, which is even more difficult to do at the right time: this can cause "use after free" bugs (if the object is destroyed too early) as well as memory leaks (if the object is not destroyed).
+
+In summary, each object should always be _owned_ by a scope that dictates its lifetime and is responsible for automatically destroying it.
+
+
+Ownership of Command Objects
+----------------------------
+
+The C++ Command-based framework often uses two types with vastly different ownership semantics:
+
+- ``Command*`` is a raw pointer, non-owning: the command object is owned elsewhere.
+- ``CommandPtr`` is an "smart" owning pointer (wrapper around ``std::unique_ptr``): whatever owns the ``CommandPtr`` transitively owns the command object.
+
+In other words, functions that take/return a ``CommandPtr`` take/return _ownership_ of the command object, as opposed to functions taking/returning a ``Command*`` that don't transfer ownership.
+
+For example, the :ref:`trigger bindings <../binding-commands-to-triggers>` have overloads for both ``Command*`` and ``CommandPtr``.
+
+Command*: Non-Owning
+^^^^^^^^^^^^^^^^^^^^
+
+Here, the command objects are defined as variables of the ``RobotContainer`` class, and therefore are owned by the ``RobotContainer`` object and exist as long as the robot code is running. The variables can be of a ``Command`` subclass (such as ``InstantCommand`` in the case of ``m_driveHalfSpeed`` and ``m_driveHalfSpeed``), or as ``CommandPtr`` (as in ``m_spinUpShooter`` and ``m_stopShooter``).
+
+.. tab-set::
+
+  .. tab-item:: Command Subclass
+    :sync: tabcode-subclass
+
+      .. remoteliteralinclude:: https://raw.githubusercontent.com/wpilibsuite/allwpilib/v2024.1.1-beta-3/wpilibcExamples/src/main/cpp/examples/StateSpaceDifferentialDriveSimulation/include/RobotContainer.h
+         :language: cpp
+         :lines: 26, 34, 43-46
+         :linenos:
+         :lineno-start: 26
+
+  .. tab-item:: CommandPtr
+     :sync: tabcode-ptr
+
+      .. remoteliteralinclude:: https://raw.githubusercontent.com/wpilibsuite/allwpilib/v2024.1.1-beta-3/wpilibcExamples/src/main/cpp/examples/Frisbeebot/include/RobotContainer.h
+         :language: cpp
+         :lines: 25, 32, 41-49
+         :linenos:
+         :lineno-start: 25
+
+To get a ``Command*``, use ``&`` (address-of operator) in case of a ``Command`` subclass or ``.get()`` in case of a ``CommandPtr``, and pass it the trigger binding method (such as ``OnTrue``):
+
+.. tab-set::
+
+  .. tab-item:: Command Subclass
+    :sync: tabcode-subclass
+
+      .. remoteliteralinclude:: https://raw.githubusercontent.com/wpilibsuite/allwpilib/v2024.1.1-beta-3/wpilibcExamples/src/main/cpp/examples/StateSpaceDifferentialDriveSimulation/cpp/RobotContainer.cpp
+         :language: cpp
+         :lines: 50-58
+         :linenos:
+         :lineno-start: 50
+
+  .. tab-item:: CommandPtr
+     :sync: tabcode-ptr
+
+      .. remoteliteralinclude:: https://raw.githubusercontent.com/wpilibsuite/allwpilib/v2024.1.1-beta-3/wpilibcExamples/src/main/cpp/examples/Frisbeebot/cpp/RobotContainer.cpp
+         :language: cpp
+         :lines: 22-31
+         :linenos:
+         :lineno-start: 22
+
+
+Since the command was passed as a ``Command*``, ownership is not transferred and the program relies on the command being owned in an appropriate scope. If the command object were to be defined in a different scope and get destroyed, this would be a use-after-free and the program would crash or otherwise misbehave ("Undefined Behavior").
+
+CommandPtr: Owning
+^^^^^^^^^^^^^^^^^^
+
+Here, commands are defined as ``CommandPtr`` and _moved_ into the binding, ownership is passed to the scheduler.
+
+.. rli:: https://github.com/wpilibsuite/allwpilib/raw/v2024.1.1-beta-4/wpilibcExamples\src\main\cpp\examples\Frisbeebot\cpp\RobotContainer.cpp
+   :language: c++
+   :lines: 22, 33-52
+   :linenos:
+   :lineno-start: 22
+
+Note the calls to ``std::move`` that hint at the ownership move.
+
+The ``shoot`` and ``stopFeeder`` variables will be destroyed when the function returns, but this isn't a problem because the object was ``std::move``d into the function. However, these variables are now in an invalid state and must not be used! Similar to use-after-free, using them would cause crashes or other undefined behavior: this is called use-after-move.
+
+To avoid the risk of use-after-move and invalid variables, ``CommandPtr``s can also be passed inline:
+
+.. rli:: https://github.com/wpilibsuite/allwpilib/raw/v2024.1.1-beta-4/wpilibcExamples/src/main/cpp/examples/Frisbeebot/cpp/RobotContainer.cpp
+   :language: c++
+   :lines: 22, 54-60
+   :linenos:
+   :lineno-start: 22
+
+It's also possible to convert ``Command`` subclasses to ``CommandPtr`` using ``.ToPtr()``:
+
+.. rli:: https://github.com/wpilibsuite/allwpilib/raw/v2024.1.1-beta-4/wpilibcExamples/src/main/cpp/examples/GearsBot/cpp/RobotContainer.cpp
+   :language: c++
+   :lines: 37
+   :linenos:
+   :lineno-start: 37
+
+Ownership in Compositions
+-------------------------
+
+As described in :ref:`/docs/software/commandbased/command-compositions`, command instances that have been passed to a command composition cannot be independently scheduled or passed to a second command composition. In C++, this interacts nicely with the ownership model: each composition owns its components! This way, double-composition bugs are nearly inexistent in C++ (whereas they pose a common error in Java).
+
+Therefore, compositions only take ``CommandPtr``s and not ``Command*``:
+
+.. rli:: https://github.com/wpilibsuite/allwpilib/raw/v2024.1.1-beta-4/wpilibcExamples/src/main/cpp/examples/MecanumControllerCommand/cpp/RobotContainer.cpp
+   :language: c++
+   :lines: 112-121
+   :linenos:
+   :lineno-start: 112
+
+Ownership of Default Commands
+-----------------------------
+
+All default commands are owned by the scheduler, therefore, ``SetDefaultCommand`` only takes a ``CommandPtr`` and not a ``Command*``:
+
+.. rli:: https://github.com/wpilibsuite/allwpilib/raw/v2024.1.1-beta-4/wpilibcExamples/src/main/cpp/examples/ArmBot/cpp/RobotContainer.cpp
+   :language: c++
+   :lines: 22-27
+   :linenos:
+   :lineno-start: 22

source/docs/software/commandbased/index.rst

@@ -16,6 +16,7 @@ For a collection of example projects using the command-based framework, see :ref
    structuring-command-based-project
    organizing-command-based
    command-scheduler
+   cpp-command-ownership
    cpp-command-discussion
    pid-subsystems-commands
    profile-subsystems-commands