FreeSWITCH

FreeSWITCH docker image

• Current version is 1.10.2

Fork

This is a fork of docker-freeswitch with few changes allowing to simplify setup of SIP server and clients.

Getting started

Run SIP server

Clone this project:

$ git clone https://github.com/wireless-road/docker-freeswitch.git
$ cd docker-freeswitch

Build docker image:

$ docker build -t fs .

and run it:

$ docker run -it --privileged=true --net="host" --name=FS -v /home/user/docker-freeswitch/freeswitch_config_example:/etc/freeswitch fs

where /home/user/docker-freeswitch/freeswitch_config_example is path to freeswitch_config_example folder of this repo. This config defines three client's IDs: 1000, 1001 and 1002 with passwords same as ID. Server address set to 192.168.0.118. You have to change it to IP address of your server in dialplan/default/20-interconnect.xml and directory/private.xml files.

Run two or more SIP clients.

You can use Baresip. Install it first:

$ sudo apt-get install baresip

Then open ~/.baresip/accounts, comment everything and add to the end of file following: <sip:[email protected]>;auth_pass=1002 to configure your baresip client with ID 1002. Do the same on another machine but using another ID (1000 or 1002). Here 192.168.0.118 is IP address of server running freeswitch.

Make a call.

Run baresip by typing

$ baresip

without any arguments on one of your machine with baresip installed on previous step. You should see log message like this:

[email protected]: {0/UDP/v4} 200 OK () [1 binding]
All 1 useragent registered successfully! (3 ms)

After that you can start a call. Type d for that and then address of abonent you are calling (1000 for example). To answer a call from machine that run baresip with address 1000 - type a.

Stop freeswitch server.

Type:

> shutdown

in freeswitch's command line to stop server.