Video of the device:
https://vimeo.com/wendyjucdr/review/303551478/4ba346b600
Photo:
To make the Circuit Playground Express breadboardable:
- Fan out the wires of a 16P (16 position) ribbon cable
- Cut and strip the wires so that there was just enough to fit through the banana cable holes and wrap around
- Solder the wires on the front and the back
- Put a little hot glue in the middle of the Circuit Playground Express, as strain relief
- Add a 16P IDC connector on the other end of the ribbon cable, making sure the orientation is right
