Re-order Readme

README.md

@@ -11,7 +11,34 @@ EPDiy is a driver board which talks to affordable E-Paper (or E-Ink) screens, wh
 
 Ready-made DIY modules for this size and with 4bpp (16 Grayscale) color support are currently quite expensive. This project uses Kindle replacement screens, which are available for 20$ (small) / 30$ (large) on ebay!
 
-The EPDiy driver board targets multiple E-Paper displays. As the driving method for all matrix-based E-ink displays seems to be more or less the same, only the right connector and timings are needed. The EPDiy PCB features a 33pin and a 39pin connector, which allow to drive the following display types: ED097OC4, ED060SC4, ED097TC2
+The EPDiy driver board targets multiple E-Paper displays. As the driving method for all matrix-based E-ink displays seems to be more or less the same, only the right connector and timings are needed. The EPDiy PCB v4 features a 33pin and a 39pin connector, which allow to drive the following display types: ED097OC4, ED060SC4, ED097TC2. With the upcoming revision v5, even more display types will be supported! For details, refer to the table below.
+
+
+Building It
+-----------
+
+If you want to build a board right now, there are two possible routes:
+ - Use the new v2 PCB (`hardware/epaper-breakout/gerbers_v4.zip`). This is a bit more fresh, but should work.
+   The BOM is available at (`hardware/epaper-breakout/BOM.csv`).
+   Positioning files for SMT assembly are available at (`hardware/epaper-breakout/gerbers/epaper-breakout-top-pos.csv`). 
+   Please double check the part positioning and Rotation with your assembly service!
+
+   Make sure to select the `V4` board revision in `idf.py menuconfig` when building the examples.
+ - Use the original v2 PCB (`hardware/epaper-breakout/gerbers_v2_rev0.zip`). 
+   However, you might run into issue #3 with some selections of parts.
+
+   Make sure to select the `v2/v3` board revision in `idf.py menuconfig` when building the examples.
+
+Gettings Started
+----------------
+
+For instructions and more information visit the [documentation](https://epdiy.readthedocs.io/en/latest/getting_started.html)!
+
+Join the Discussion
+----------------
+
+ - [![Matrix](https://img.shields.io/matrix/epdiy-general:matrix.vroland.de?label=Join%20Matrix)](https://matrix.to/#/!GUXWriqsBKkWyXzsBK:matrix.vroland.de?via=matrix.vroland.de) Matrix Community: +epdiy:matrix.vroland.de
+ - [![JoinSlack](https://img.shields.io/badge/Join%20us-on%20Slack-blueviolet.svg)](https://join.slack.com/t/epdiy/shared_invite/zt-kx2yqjxg-BSlEOBC_QN7IKI5RYlrXkA)
 
 Displays
 --------
@@ -43,32 +70,6 @@ Displays
 
 **Please note that board revision v5 is still in prototype stage!**
 
-Building It
------------
-
-If you want to build a board right now, there are two possible routes:
- - Use the new v2 PCB (`hardware/epaper-breakout/gerbers_v4.zip`). This is a bit more fresh, but should work.
-   The BOM is available at (`hardware/epaper-breakout/BOM.csv`).
-   Positioning files for SMT assembly are available at (`hardware/epaper-breakout/gerbers/epaper-breakout-top-pos.csv`). 
-   Please double check the part positioning and Rotation with your assembly service!
-
-   Make sure to select the `V4` board revision in `idf.py menuconfig` when building the examples.
- - Use the original v2 PCB (`hardware/epaper-breakout/gerbers_v2_rev0.zip`). 
-   However, you might run into issue #3 with some selections of parts.
-
-   Make sure to select the `v2/v3` board revision in `idf.py menuconfig` when building the examples.
-
-Gettings Started
-----------------
-
-For instructions and more information visit the [documentation](https://epdiy.readthedocs.io/en/latest/getting_started.html)!
-
-Join discussion on EPDiy Slack channel
-----------------
-
-[![Matrix](https://img.shields.io/matrix/epdiy-general:matrix.vroland.de?label=Join%20Matrix)](https://matrix.to/#/!GUXWriqsBKkWyXzsBK:matrix.vroland.de?via=matrix.vroland.de) Matrix Community: +epdiy:matrix.vroland.de
-[![JoinSlack](https://img.shields.io/badge/Join%20us-on%20Slack-blueviolet.svg)](https://join.slack.com/t/epdiy/shared_invite/zt-kx2yqjxg-BSlEOBC_QN7IKI5RYlrXkA)
-
 Troubleshooting
 ---------------