Skip to content

vial-kb/vibl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

54 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

vibl

vibl: a driverless keyboard bootloader that integrates with Vial GUI.

Currently, implementations are available for:

Porting

Porting the bootloader (STM32F103)

  1. Add a new line in CMakeLists.txt for your keyboard, e.g. add_bootloader(mykeyboard)

  2. Add a new option in the bootloader/src/config.h configuration file for your keyboard before the final "else" statement:

#elif defined(TARGET_MYKEYBOARD)
/*
  This should match the UID you have configured in the Vial firmware
  See Vial porting docs for more info: https://vial-kb.github.io/gettingStarted/porting-to-vial.html
*/
#define VIAL_KEYBOARD_UID {0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX, 0xXX}
/*
  These configure an emergency key which triggers bootloader entry when it is held during boot.
  The definitions match a typical QMK COL2ROW setup. If you use a ROW2COL setup, switch around ROW and COL in the defines below.
*/
#define BL_COL_BANK GPIOB
#define BL_COL_PIN 12
#define BL_ROW_BANK GPIOB
#define BL_ROW_PIN 13
  1. Compile the bootloader
cd bootloader
mkdir build && cd build
cmake ..
make

This should produce a bootloader-mykeyboard.bin file.

  1. Flash and write-protect the bootloader

In order to program option bytes, you should use a fork of stlink. Once you compile it, flash the bootloader with:

st-flash opterase
st-flash write ../../misc/opt-head.bin 0x1FFFF800
st-flash write bootloader-mykeyboard.bin 0x8000000
st-flash write ../../misc/opt-tail.bin 0x1FFFF802
st-flash --area=option read

You should confirm that the final command produces the following output:

A5 5A FF 00 FF 00 FF 00 FE 01 FF 00 FF 00 FF 00

FE 01 indicates that the first block of 0x1000 bytes is write-protected.

Power-cycle the device and confirm it boots into the bootloader:

[1737747.221873] usb 1-5.2: new full-speed USB device number 8 using xhci_hcd
[1737747.468303] usb 1-5.2: New USB device found, idVendor=1234, idProduct=5678, bcdDevice= 0.01
[1737747.468306] usb 1-5.2: New USB device strings: Mfr=1, Product=1, SerialNumber=2
[1737747.468307] usb 1-5.2: Product: vibl-HIDUSB
[1737747.468308] usb 1-5.2: Manufacturer: vibl-HIDUSB
[1737747.468309] usb 1-5.2: SerialNumber: vibl:d4f8159c

Integrating into vial-qmk

  1. In your keyboard rules.mk, enable the vibl bootloader(example):
MCU = STM32F103
BOOTLOADER = vibl
  1. In your vial.json file, enable the vibl feature(example):
  "vial": {
    "vibl": true
  }
  1. Compile your keyboard firmware as usual with make mykeyboard:via; now the build process will produce a .vfw file in addition to the .bin:
Compiling: quantum/via.c                                                                            [OK]
Compiling: tmk_core/common/command.c                                                                [OK]
Linking: .build/vial_test_via.elf                                                                   [OK]
Creating binary load file for flashing: .build/vial_test_via.bin                                    [OK]
--------------------------------------------------------------------------------
Vial update package created at vial_test_via.vfw
--------------------------------------------------------------------------------
Creating load file for flashing: .build/vial_test_via.hex                                           [OK]

Size after:
   text	   data	    bss	    dec	    hex	filename
      0	  30934	      0	  30934	   78d6	.build/vial_test_via.hex

Copying vial_test_via.bin to qmk_firmware folder                                                    [OK]
(Firmware size check does not yet support cortex-m3 microprocessors; skipping.)

At that point you should be able to open Vial GUI, have the bootloader auto-detected and flash your firmware package. Further, after flashing such firmware for the first time, the update process can also be performed without having to manually restart in bootloader mode.

Firmware updater when keyboard is in bootloader mode

Firmware updater when keyboard is running vial-qmk firmware

  1. Verify the emergency key download is working

Make sure to test that you configured the emergency bootloader key correctly by holding it down while plugging in the keyboard. Review and correct your vibl configuration if the keyboard does not start in bootloader mode when the key is held.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages