board: add AKIZUKI DENSHI AE-RP2040

Makefile

@@ -648,6 +648,8 @@ endif
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=gopher-badge      examples/blinky1
 	@$(MD5SUM) test.hex
+	$(TINYGO) build -size short -o test.hex -target=ae-rp2040           examples/blinky1
+	@$(MD5SUM) test.hex
 	# test pwm
 	$(TINYGO) build -size short -o test.hex -target=itsybitsy-m0        examples/pwm
 	@$(MD5SUM) test.hex

src/machine/board_ae_rp2040.go

@@ -0,0 +1,111 @@
+//go:build ae_rp2040
+
+package machine
+
+import (
+	"device/rp"
+	"runtime/interrupt"
+)
+
+// GPIO pins
+const (
+	GP0  Pin = GPIO0
+	GP1  Pin = GPIO1
+	GP2  Pin = GPIO2
+	GP3  Pin = GPIO3
+	GP4  Pin = GPIO4
+	GP5  Pin = GPIO5
+	GP6  Pin = GPIO6
+	GP7  Pin = GPIO7
+	GP8  Pin = GPIO8
+	GP9  Pin = GPIO9
+	GP10 Pin = GPIO10
+	GP11 Pin = GPIO11
+	GP12 Pin = GPIO12
+	GP13 Pin = GPIO13
+	GP14 Pin = GPIO14
+	GP15 Pin = GPIO15
+	GP16 Pin = GPIO16
+	GP17 Pin = GPIO17
+	GP18 Pin = GPIO18
+	GP19 Pin = GPIO19
+	GP20 Pin = GPIO20
+	GP21 Pin = GPIO21
+	GP22 Pin = GPIO22
+	GP26 Pin = GPIO26
+	GP27 Pin = GPIO27
+	GP28 Pin = GPIO28
+	GP29 Pin = GPIO29
+
+	// Onboard crystal oscillator frequency, in MHz.
+	xoscFreq = 12 // MHz
+)
+
+// I2C Default pins on Raspberry Pico.
+const (
+	I2C0_SDA_PIN = GP4
+	I2C0_SCL_PIN = GP5
+
+	I2C1_SDA_PIN = GP2
+	I2C1_SCL_PIN = GP3
+)
+
+// SPI default pins
+const (
+	// Default Serial Clock Bus 0 for SPI communications
+	SPI0_SCK_PIN = GPIO18
+	// Default Serial Out Bus 0 for SPI communications
+	SPI0_SDO_PIN = GPIO19 // Tx
+	// Default Serial In Bus 0 for SPI communications
+	SPI0_SDI_PIN = GPIO16 // Rx
+
+	// Default Serial Clock Bus 1 for SPI communications
+	SPI1_SCK_PIN = GPIO10
+	// Default Serial Out Bus 1 for SPI communications
+	SPI1_SDO_PIN = GPIO11 // Tx
+	// Default Serial In Bus 1 for SPI communications
+	SPI1_SDI_PIN = GPIO12 // Rx
+)
+
+// UART pins
+const (
+	UART0_TX_PIN = GPIO0
+	UART0_RX_PIN = GPIO1
+	UART1_TX_PIN = GPIO8
+	UART1_RX_PIN = GPIO9
+	UART_TX_PIN  = UART0_TX_PIN
+	UART_RX_PIN  = UART0_RX_PIN
+)
+
+// UART on the RP2040
+var (
+	UART0  = &_UART0
+	_UART0 = UART{
+		Buffer: NewRingBuffer(),
+		Bus:    rp.UART0,
+	}
+
+	UART1  = &_UART1
+	_UART1 = UART{
+		Buffer: NewRingBuffer(),
+		Bus:    rp.UART1,
+	}
+)
+
+var DefaultUART = UART0
+
+func init() {
+	UART0.Interrupt = interrupt.New(rp.IRQ_UART0_IRQ, _UART0.handleInterrupt)
+	UART1.Interrupt = interrupt.New(rp.IRQ_UART1_IRQ, _UART1.handleInterrupt)
+}
+
+// USB identifiers
+const (
+	usb_STRING_PRODUCT      = "AE-RP2040"
+	usb_STRING_MANUFACTURER = "AKIZUKI DENSHI"
+)
+
+var (
+	usb_VID uint16 = 0x2E8A
+	usb_PID uint16 = 0x000A
+)

targets/ae-rp2040.json

@@ -0,0 +1,14 @@
+{
+    "inherits": [
+        "rp2040"
+    ],
+    "build-tags": ["ae_rp2040"],
+    "serial-port": ["2e8a:000A"],
+    "ldflags": [
+        "--defsym=__flash_size=2048K"
+    ],
+    "extra-files": [
+        "targets/pico-boot-stage2.S"
+    ]
+}
+