Fluentd Forwarder Container

Overview

OpenShift can be configured to host an EFK stack that stores and indexes log data but at some sites a log aggregation system is already in place. A forwarding fluentd can be configured to forward log data to a remote collection point. Using a containerized version that runs within OCP both simplifies some of the infrastructure and certificate management and allows rapid deployment with resiliancy.

Public Domain

This project constitutes a work of the United States Government and is not subject to domestic copyright protection under 17 USC § 105. This project is in the public domain within the United States, and copyright and related rights in the work worldwide are waived through the CC0 1.0 Universal public domain dedication. All contributions to this project will be released under the CC0 dedication. By submitting a pull request you are agreeing to comply with this waiver of copyright interest.

License

The project utilizes code licensed under the terms of the Apache Software License and therefore is licensed under ASL v2 or later.

This program is free software: you can redistribute it and/or modify it under the terms of the Apache Software License version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the Apache Software License for more details.

You should have received a copy of the Apache Software License along with this program. If not, see http://www.apache.org/licenses/LICENSE-2.0.html

Privacy

This project contains only non-sensitive, publicly available data and information. All material and community participation is covered by the Surveillance Platform Disclaimer and Code of Conduct. For more information about CDC's privacy policy, please visit http://www.cdc.gov/privacy.html.

Bill of Materials

Environment Specifications

This quickstart should be run on an installation of OpenShift Enterprise V3 with an existing EFK deployment.

Template Files

Build Configurations
- RHEL
- CentOS
Application Deployment Template

Config Files

Fluentd Forwarding Configuration
- Echoed in ConfigMap section in Application Template

Setup Instructions

Have the [fluentd-forwarder-build-config-template](./fluentd-forwarder-build-config-template.yaml) and the [fluentd-forwarder-template](./fluentd-forwarder-template.yaml) available for adding to the cluster. These templates will be needed for creating builds and deploying the application.

Environment Setup

The EFK stack should already be configured in the "logging" namespace.

Create Build Configuration

Choose the RHEL (default) or CentOS (-centos) flavor of build configuration. Add the build configuration template to the logging namespace.

oc project logging
oc apply -f fluentd-forwarder-build-config-template.yaml

For CentOS use the -centos template.

oc project logging
oc apply -f fluentd-forwarder-centos-build-config-template.yaml

Process the template to create a build, using any relevant variables. In the general case the defaults are fine.

oc project logging
oc process fluentd-forwarder | oc apply -f -

For CentOS process the -centos template.

oc project logging
oc process fluentd-forwarder-centos | oc apply -f -

By default the build will disable all repositories in the base image, enabling only the ones required for installing the required packages. If you want to use the build process to use the existing repository config as is (e.g. if you're using a custom base image) then set the USE_SYSTEM_REPOS environment variable to any value in the BuildConfig object.

oc project logging
oc set env bc/fluentd-forwarder USE_SYSTEM_REPOS=1

On CentOS:

oc project logging
oc set env bc/fluentd-forwarder-centos USE_SYSTEM_REPOS=1

Build the fluentd-forwarder

oc project logging
oc start-build fluentd-forwarder-build

To build with CentOS use the -centos build configuration.

oc project logging
oc start-build fluentd-forwarder-centos-build

Create Fluentd Forwarder

Add the template to the logging namespace:

oc project logging
oc apply -f fluentd-forwarder-template.yaml

RHEL

RHEL Rsyslog

Create the new rsyslog logging forwarder application deployment:

oc project logging
oc process fluentd-forwarder \
   -p "P_TARGET_TYPE=remote_syslog" \
   -p "P_TARGET_HOST=rsyslog.internal.company.com" \
   -p "P_TARGET_PORT=514" \
   -p "P_SHARED_KEY=changeme" \
   | oc create -f -

RHEL splunkex

To create the new splunk-ex logging forwarder application deployment:

oc project logging && \
oc process -f fluentd-forwarder-template.yaml \
   -p "P_TARGET_TYPE=splunk_ex" \
   -p "P_TARGET_HOST=10.10.10.10" \
   -p "P_TARGET_PORT=9997" \
   -p "P_SHARED_KEY=changeme" \
   -p "P_ADDITIONAL_OPTS=output_format json" \
   | oc create -f -

RHEL splunkhec

To create the new splunkhec logging forwarder application deployment:

oc project logging
oc process fluentd-forwarder \
   -p P_TARGET_TYPE="splunkhec" \
   -p P_TARGET_HOST="examplehec.example.com" \
   -p P_TARGET_PORT="8088" \
   -p P_SHARED_KEY="changeme" \
   -p P_ADDITIONAL_OPTS="token <token_value>" \
   | oc create -f -

CentOS

CentOS Rsyslog

To do the same for CentOS you need to reference the ImageStream created by that build.

oc project logging
oc process fluentd-forwarder \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p "P_TARGET_TYPE=remote_syslog" \
   -p "P_TARGET_HOST=rsyslog.internal.company.com" \
   -p "P_TARGET_PORT=514" \
   -p "P_SHARED_KEY=changeme" \
   | oc create -f -

CentOS splunkex

To create the new splunk-ex logging forwarder application deployment:

oc project logging && \
oc process -f fluentd-forwarder-template.yaml \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p "P_TARGET_TYPE=splunk_ex" \
   -p "P_TARGET_HOST=10.10.10.10" \
   -p "P_TARGET_PORT=9997" \
   -p "P_SHARED_KEY=changeme" \
   -p "P_ADDITIONAL_OPTS=output_format json" \
   | oc create -f -

CentOS splunkhec

To create the new splunkhec logging forwarder application deployment:

oc project logging
oc process fluentd-forwarder \
   -p "P_IMAGE_NAME=fluentd-forwarder-centos" \
   -p P_TARGET_TYPE="splunkhec" \
   -p P_TARGET_HOST="examplehec.example.com" \
   -p P_TARGET_PORT="8088" \
   -p P_SHARED_KEY="changeme" \
   -p P_ADDITIONAL_OPTS="token <token_value>" \
   | oc create -f -

A full list of parameters can be found in the template. Additional non-parameterized parameters and environment variables can be found in the Dockerfile.

Configure Fluentd Loggers

The "logging-fluentd" configmap's "data.secure-forward.conf" key needs to be edited as well.

oc edit configmap -n logging logging-fluentd

Edit the following YAML:

data:
  secure-forward.conf: |
    <store>
      @type secure_forward

      self_hostname ${HOSTNAME}
      shared_key changeme

      secure yes
      enable_strict_verification yes

      ca_cert_path /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt

      <server>
         host fluentd-forwarder.logging.svc.cluster.local
         port 24284
      </server>
    </store>

This will cause each individual fluentd logger to begin forwarding to the service address fluentd-forwarder.logging.svc.cluster.local which was created with the new-app command. That service has it's own cluster-generated certificates and the "ca_cert_path" value here is used to trust the cluster's service signer CA.

After saving the above changes the logging-fluentd pods need to be restarted. Delete them and they will be recreated.

oc delete pod -l component=fluentd

Additional Configuration

After creating the application you can edit the configuration for the logging forwarder in a more direct manner by manipulating the configuration map.

oc edit configmap -n logging fluentd-forwarder

This will allow you to edit a copy of the configuration template and override the one provided in the Docker container without performing a rebuild.

Any environment variables (like SHARED_KEY or TARGET_TYPE) will be substituted during the Pod startup just as with the built-in template using the envsubst command. Additional parameters can be added to the deployment config or directly edited here.

data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

      shared_key ${SHARED_KEY}

      secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

      ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

      private_key_passphrase ${KEY_PASSPHRASE}
    </source>

    <filter **>
      @type record_transformer
      <record>
        forwarded_by "#{ENV['HOSTNAME']}"
        source_component "OCP"
      </record>
    </filter>

    <match **>
      type ${TARGET_TYPE}
      host ${TARGET_HOST}
      port ${TARGET_PORT}
      output_format json
    </match>

If you save changes to this configuration map you will need to delete the pods for the deployment so they can be recreated.

oc delete pods -l name=fluentd-forwarder

Filtering

In some use cases it might be necessary to perform filtering at the external fluentd process. This would be done to reduce the number or type of messages that are forwared.

Using the fluentd.conf file from above a new record will be added to the json message. The record kubernetes_namespace_name will be set to the OpenShift namespace from where the messages originated.

data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

      shared_key ${SHARED_KEY}

      secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

      ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

      private_key_passphrase ${KEY_PASSPHRASE}
    </source>

    <filter **>
      @type record_transformer
      enable_ruby yes
      auto_typecast yes
      <record>
        kubernetes_namespace_name ${record["kubernetes"].nil? ? 'devnull' : record["kubernetes"]["namespace_name"].nil? ? 'devnull' : record["kubernetes"]["namespace_name"]}
        forwarded_by "#{ENV['HOSTNAME']}"
        source_component "OCP"
      </record>
    </filter>

    #Run filter on kube messages
    <filter **>
      @type grep
      #Always filter out the restricted namespaces
      exclude1 kubernetes_namespace_name (null|devnull|logging|default|kube-public|kube-service-catalog|kube-system|logging|management-infra|openshift|openshift-ansible-service-broker|openshift-infra|openshift-metrics|openshift-node)

    </filter>

    <match **>
      @type ${TARGET_TYPE}
      #host ${TARGET_HOST}
      #port ${TARGET_PORT}
      ${ADDITIONAL_OPTS}
    </match>

All system level messages would be dropped in the example above. To filter system messages filter on the system.** tag.

data:
  fluentd.conf: |
    <source>
      @type secure_forward
      self_hostname "#{ENV['HOSTNAME']}"
      bind 0.0.0.0
      port 24284

      shared_key ${SHARED_KEY}

      secure           ${IS_SECURE}
      enable_strict_verification ${STRICT_VERIFICATION}

      ca_cert_path     ${CA_PATH}
      cert_path        ${CERT_PATH}
      private_key_path ${KEY_PATH}

      private_key_passphrase ${KEY_PASSPHRASE}
    </source>

    <filter system.**>
      #Add system filtering logic here.
    </filter>

    <match system.**>
      @type ${TARGET_TYPE}
      #host ${TARGET_HOST}
      #port ${TARGET_PORT}
      ${ADDITIONAL_OPTS}
    </match>

    #Toss the rest of the records.
    <match **>
      @type null
    </match>

Validating the Application

The best verification is that logs are showing up in the remote location. The application sets two tags "forwarded_by" which is set to the pod's hostname and "source_component" which is always set to "OCP". You can use those tags to search the logging collection facility for the logs being produced.

If VERBOSE is set as an environment variable in the deployment config (oc edit dc fluentd-forwarder) then you can tail the logs of the fluentd-forwarder container and you should see a lot of information about reads. This is not the most reliable test but it will at least point in the right direction.

oc logs fluentd-forwarder-1-a3zdf
2017-06-19 21:05:20 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:23 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:24 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:25 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:26 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read
2017-06-19 21:05:26 +0000 [debug]: plugin/input_session.rb:122:on_read: on_read

Resources

Privacy

This project contains only non-sensitive, publicly available data and information. All material and community participation is covered by the Surveillance Platform Disclaimer and Code of Conduct. For more information about CDC's privacy policy, please visit http://www.cdc.gov/privacy.html.

Contributing

Anyone is encouraged to contribute to the project by forking and submitting a pull request. (If you are new to GitHub, you might start with a basic tutorial.) By contributing to this project, you grant a world-wide, royalty-free, perpetual, irrevocable, non-exclusive, transferable license to all users under the terms of the Apache Software License v2 or later.

All comments, messages, pull requests, and other submissions received through CDC including this GitHub page are subject to the Presidential Records Act and may be archived. Learn more at http://www.cdc.gov/other/privacy.html.

Records

This project is not a source of government records, but is a copy to increase collaboration and collaborative potential. All government records will be published through the CDC web site.

Name		Name	Last commit message	Last commit date
Latest commit History 62 Commits
Dockerfile		Dockerfile
Dockerfile.centos		Dockerfile.centos
LICENSE		LICENSE
README.md		README.md
common-install.sh		common-install.sh
fluentd-check.sh		fluentd-check.sh
fluentd-forwarder-build-config-template.yaml		fluentd-forwarder-build-config-template.yaml
fluentd-forwarder-centos-build-config-template.yaml		fluentd-forwarder-centos-build-config-template.yaml
fluentd-forwarder-template.yaml		fluentd-forwarder-template.yaml
fluentd.conf.template		fluentd.conf.template
passwd.template		passwd.template
run.sh		run.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Fluentd Forwarder Container

Table of Contents

Overview

Public Domain

License

Privacy

Bill of Materials

Environment Specifications

Template Files

Config Files

Setup Instructions

Environment Setup

Create Build Configuration

Create Fluentd Forwarder

RHEL

RHEL Rsyslog

RHEL splunkex

RHEL splunkhec

CentOS

CentOS Rsyslog

CentOS splunkex

CentOS splunkhec

Configure Fluentd Loggers

Additional Configuration

Filtering

Validating the Application

Resources

Privacy

Contributing

Records

About

Releases

Packages

Languages

License

themoosman/openshift-fluentd-forwarder

Folders and files

Latest commit

History

Repository files navigation

Fluentd Forwarder Container

Table of Contents

Overview

Public Domain

License

Privacy

Bill of Materials

Environment Specifications

Template Files

Config Files

Setup Instructions

Environment Setup

Create Build Configuration

Create Fluentd Forwarder

RHEL

RHEL Rsyslog

RHEL splunkex

RHEL splunkhec

CentOS

CentOS Rsyslog

CentOS splunkex

CentOS splunkhec

Configure Fluentd Loggers

Additional Configuration

Filtering

Validating the Application

Resources

Privacy

Contributing

Records

About

Topics

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages