Skip to content

Commit

Permalink
Fix descriptions
Browse files Browse the repository at this point in the history
  • Loading branch information
reimerix committed Dec 21, 2023
1 parent b9860dc commit b1294ec
Show file tree
Hide file tree
Showing 3 changed files with 19 additions and 18 deletions.
11 changes: 5 additions & 6 deletions spec/yaml/swiftnav/sbp/imu.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -25,12 +25,11 @@ definitions:
the indications on the device itself. Measurement units, which are
specific to the device hardware and settings, are communicated via the
MSG_IMU_AUX message. If using "time since startup" local time tags, the
receiving end will expect a `MSG_PPS_TIME` regardless of GNSS fix state.
This also requires that the MSG_PPS_TIME message be sent prior to any IMU
RAW messages that are based on the current (as measured at the PPS edge)
local time timestamps. The local time (as defined in the MSG_PPS_TIME
message) must wrap around to zero when reaching the extent of the u64
"Local time in microseconds" parameter.
receiving end will expect either a MSG_GNSS_TIME_OFFSET or MSG_PPS_TIME
to establish the relationship between IMU time and GNSS time.
Regardless of the timestamping mode, the timestamp is required to roll
over to zero when reaching one week (604800 seconds, or 604800000 milliseconds).
The time-tagging mode should not change throughout a run.
fields:
Expand Down
12 changes: 6 additions & 6 deletions spec/yaml/swiftnav/sbp/system.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -451,18 +451,18 @@ definitions:
desc: >
The PPS time message contains the value of the sender's local time in
microseconds at the moment a pulse is detected on the PPS input. This
is to be used for syncronisation of sensor data sampled with a local
is to be used for synchronisation of sensor data sampled with a local
timestamp (e.g. IMU or wheeltick messages) where GNSS time is unknown
to the sender.
The local time used to timestamp the PPS pulse must be generated by the
same clock which is used to timestamp the IMU/wheel sensor data and
should follow the same roll-over rules. A separate MSG_PPS_TIME
message should be sent for each source of sensor data which uses
PPS-relative timestamping. The sender ID for each of these
MSG_PPS_TIME messages should match the sender ID of the respective
sensor data.
should follow the same roll-over rules (i.e. it should roll over to zero
after 604800 seconds). A separate MSG_PPS_TIME message should be sent
for each source of sensor data which uses local timestamping. The sender
ID for each of these MSG_PPS_TIME messages should match the sender ID of
the respective sensor data.
fields:
- time:
type: u64
Expand Down
14 changes: 8 additions & 6 deletions spec/yaml/swiftnav/sbp/vehicle.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -23,9 +23,10 @@ definitions:
the definition and origin of the user frame are defined through the device settings interface.
There are 4 possible user-defined sources of this message which are labeled arbitrarily
source 0 through 3.
If using "processor time" time tags, the receiving end will expect a
`MSG_GNSS_TIME_OFFSET` when a PVT fix becomes available to synchronise odometry measurements
with GNSS. Processor time shall roll over to zero after one week.
If using "processor time" time tags, the receiving end will expect either
`MSG_GNSS_TIME_OFFSET` or `MSG_PPS_TIME` to sync incoming odometry data to GNSS time.
Processor time shall roll over to zero after one week.
fields:
- tow:
type: u32
Expand Down Expand Up @@ -77,9 +78,10 @@ definitions:
from 0 to 255.
The timestamp associated with this message should represent the time when the accumulated
tick count reached the value given by the contents of this message as accurately as possible.
If using "local CPU time" time tags, the receiving end will expect a
`MSG_GNSS_TIME_OFFSET` when a PVT fix becomes available to synchronise wheeltick measurements
with GNSS. Local CPU time shall roll over to zero after one week.
If using "local CPU time" time tags, the receiving end will also expect either
`MSG_GNSS_TIME_OFFSET` or `MSG_PPS_TIME` to sync incoming wheeltick data to GNSS time.
Local CPU time shall roll over to zero after one week.
fields:
- time:
type: u64
Expand Down

0 comments on commit b1294ec

Please sign in to comment.