Subutai™ Router 2.0

The Subutai™ Router 2.0 platform is the successor of the Subutai™ Router 1.0. It will be based on Zynq Ultrascale+ MPSOC, and it will not use any som, being itself a SBC. The Subutai™ Router 2.0 adds extra add-on features to SR 1.0, as well as it enhances the Ethernet Switch capability of SR 1.0 from Fast Ethernet to Gigabit Ethernet.

The board adds a Raspberry extension connector connected to its Ultrascale FPGA PL I/Os, it also has an Arduino Uno R3 compatible extension connector which is also connected to PL FPGA I/Os. These 2 connectors, together with the 5 PMOD extension connectors gives user the ability to plug n play the COTS products to his SR 2.0.

With the trading off 8 eMMC connectors out of 12 and having 4 eMMC slots remaining, the SR 2.0 adds the standard add-on capabilities for using the COTS products ranging from wireless ICs, sensors, IMUs, GSM modules, GPS modules etc, or even any custom designed module which has the right pinout to be plugged.

The features are roughly:

• Zynq Ultrascale+ MPSOC
• 4/8 GB DDR4 PS RAM
• SODIMM DDR Ram expansion slot for PL RAM
• 4x eMMC5.0 storage devices (up to 256GB with extremely fast bandwidth - to be released very soon)
• 5 port Layer 2 controlled Gigabit Ethernet Switch
• Wifi(b/g/n)/BT4.0
• Raspberry Pi compatible extension connector
• Arduino Uno R3 compatible extension connector
• 5x PMOD extension connectors

Details and images will be released very soon...

Sunshine,

Subutai Hardware Community