hotfix link

docs/getting-started.md

@@ -18,7 +18,7 @@ The USB-C port at the bottom powers and charges the Beepy. **Do not power the Ra
 
 Update Beepy's firmware to ensure driver compatibility and the latest device features:
 
-- Download the [latest firmware image](https://github.com/sqfmi/i2c_puppet/releases/latest/download/i2c_puppet.uf2)
+- Download the [latest firmware image](https://github.com/ardangelo/beepberry-rp2040/releases/latest/download/i2c_puppet.uf2)
 - Slide the power switch off (left if facing up)
 - Connect the Beepy to your computer via USB-C
 - While holding the "End Call" key (top right on the keypad), slide the power switch on
@@ -51,7 +51,7 @@ There are two choices of operating systems to run on your Beepy
 
 3. Your Beepy with is now ready, enjoy!
 
-    - Review the [default symbol keymap](https://beepy.sqfmi.com/img/symbol-keys.png) 
+    - Review the [default symbol keymap](/docs/firmware/keyboard#symbol-key-map) 
 
 ### Setting up a Buildroot System
 
@@ -74,7 +74,7 @@ The initial boot will take about 30 seconds to resize disk partitions to fill yo
 * Configure Wi-Fi: use `nmtui` or edit `/boot/wlan/<your_network_name>.psk`
 * Updating Buildroot image: reflash SD card, or run `sudo update_buildroot`
 
-Review the [default symbol keymap](/docs/keyboard)
+Review the [default symbol keymap](/docs/firmware/keyboard#symbol-key-map)
 
 ## Powering on/off your Beepy