Skip to content

spring-cloud/spring-cloud-release-tools

Build

Spring Cloud Release Tools

Spring Cloud projects reuse the same pattern of building and deploying the applications. That’s why this tool makes it easy to automate the release / dependency update process of our applications.

Releasing through Jenkins

Note
Whenever a release process is broken, Jenkins marks it with a red 'X' and breaks the build. Whenever a post-release action went wrong but the release is successful, Jenkins marks the build with a yellow exclamation and marks the build as unstable.

Releasing a Single Project

Let us assume that we are to release spring-cloud-build project. We need to do the following steps:

  1. Create a branch (for example, springCloudBuildRelease) in a project that contains a BOM (for example, spring-cloud-release). The following example shows how to do so:

$ git clone [email protected]:spring-cloud/spring-cloud-release.git
$ cd spring-cloud-release
$ git checkout -b springCloudBuildRelease
  1. Update all versions as if you were doing a release train. We need to update the project’s versions, Boot version, and dependencies versions, too. Let us assume that we will eventually be doing a release train for the Hoxton.M1 release, Spring Boot to the latest available one, and spring-cloud-commons to 1.2.3.BUILD-SNAPSHOT. The following example shows how to do so:

// setting the release train value
$ ./mvnw versions:set -DnewVersion=Hoxton.M1 -DgenerateBackupPoms=false -DprocessAllModules=true
// Update all parent versions
$ ./mvnw versions:update-parent -DgenerateBackupPoms=false -DprocessAllModules=true
// Setting the necessary dependencies
$ ./mvnw versions:set-property -Dproperty=spring-cloud-commons.version -DnewVersion=1.2.3.BUILD-SNAPSHOT -pl spring-cloud-dependencies -DgenerateBackupPoms=false
// NOTE!!!
// Verify that the versions set by Maven are correct!!
$ git diff
// commit and push the branch
$ git add . && git commit -m "Updating project for Spring Cloud Build release" && git push origin springCloudBuildRelease
Important
If you’re doing a e.g. M1 release, remember to not have any snapshot versions in this branch.

Since the project is prepared, go to Jenkins and select the Releaser view, which the following image shows:

Releaser view
  1. Pick the proper releaser project (for example, spring-cloud-build-releaser). The following image shows the settings for this example:

Spring Cloud Build Releaser - build with parameters
  1. Next, click Build with parameters. The following image shows the UI for doing so:

Updated `RELEASER_POM_BRANCH`

Pick from which branch you would like the project (for example, spring-cloud-build - defaults to main) to be built and update the RELEASER_POM_BRANCH to point to the checked-out branch of Spring Cloud Release (for example, springCloudBuildRelease). You can pick whether you want to perform only post-release tasks or the whole release.

  1. Finally, click Build.

You are done!

As a post action, do not forget to remove the branch. The following example shows how to do so:

// to synchronize any deleted branches (don't run this if you want leave any deleted branches that were deleted in the origin)
$ git fetch -p
$ git branch -d springCloudBuildRelease
$ git push origin --delete springCloudBuildRelease

Releasing a Release Train

We call a release train a meta-release. In order to perform one, you need to:

  1. In your project (which must contain a BOM, such as spring-cloud-release) you have to have a branch, where you store properties with versions of your projects. For example, the branch name can be jenkins-releaser-config). The following example shows how to do so:

$ git clone [email protected]:spring-cloud/spring-cloud-release.git
$ cd spring-cloud-release
$ git checkout jenkins-releaser-config
  1. Create a file that contains all properties for a given release train. The name of the release train should be lowercase, and dots should be converted to underscores. For example, for the Greenwich.SR2 release train we need to have a file named greenwich_sr2.properties. The following example shows how to do so:

$ touch greenwich_sr2.properties
  1. We need to update the file with all versions for the release train. The properties file contains an ordered list of releaser.fixed-versions[project-name]=project-version entries, as the following listing shows:

$ echo "releaser.fixed-versions[spring-boot]=2.1.5.RELEASE
releaser.fixed-versions[spring-cloud-build]=2.1.5.RELEASE
releaser.fixed-versions[spring-cloud-commons]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-function]=2.0.2.RELEASE
releaser.fixed-versions[spring-cloud-stream]=Fishtown.SR3
releaser.fixed-versions[spring-cloud-aws]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-bus]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-task]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-config]=2.1.3.RELEASE
releaser.fixed-versions[spring-cloud-netflix]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-cloudfoundry]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-kubernetes]=1.0.2.RELEASE
releaser.fixed-versions[spring-cloud-openfeign]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-consul]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-gateway]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-security]=2.1.3.RELEASE
releaser.fixed-versions[spring-cloud-sleuth]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-zookeeper]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-contract]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-gcp]=1.1.2.RELEASE
releaser.fixed-versions[spring-cloud-vault]=2.1.2.RELEASE
releaser.fixed-versions[spring-cloud-release]=Greenwich.SR2" >> greenwich_sr2.properties
$ git add greenwich_sr2.properties && git commit -m "Added Greenwich.SR2 properties" && git push origin jenkins-releaser-config

Since the project is prepared, go to Jenkins and select the Releaser view, as the following image shows:

Releaser view
  1. Pick the proper meta-releaser project (for example, spring-cloud-meta-releaser), as the following image shows:

Spring Cloud Meta Releaser - build with parameters
  1. Next, click Build with parameters.

Spring Cloud Meta Releaser view

You have quite a few options to pick, but the most important one is to set the value of the RELEASE_VERSION to the given release train version (for example, Greenwich.SR2). Continue updating the rest of the fields if necessary and read the field descriptions and this documentation for more information.

  1. Finally, click Build.

You are done!

What does it do?

Single project

For a single project, by default if you opt in to all tasks

  • Clones the BOM project and picks all versions

  • Modifies the project versions with values from a BOM (e.g. for Spring Cloud it’s Spring Cloud Release)

    • throws an exception when we bump versions to release and there’s a SNAPSHOT version referenced in the POM

  • Performs the build and checks if the docs modules have properly created the documentation

    • throws an exception when in the docs module there’s an unresolved tag in any HTML file

  • Commits changed poms (ONLY FOR NON-SNAPSHOT VERSIONS)

  • Creates a tag for the release / milestone (ONLY FOR NON-SNAPSHOT VERSIONS)

  • Runs the deployment of the artifacts

  • Publishes the docs (for Spring Cloud to spring-cloud-static for non-snapshots, to gh-pages for snapshots)

  • Reverts back to snapshots, bumps the version by a patch (1.0.1.RELEASE1.0.2.BUILD-SNAPSHOT) (ONLY FOR RELEASE VERSIONS)

  • Closes the milestone on Github (e.g. v1.0.1.RELEASE) (ONLY FOR NON-SNAPSHOT VERSIONS)

Important
Starting with version that does Sagan integration, you MUST pass the OAuth token, otherwise the application will fail to start

After project release

Meta-release

All the tasks are opt in, so if you do opt in for everything you’ll get:

  • Uses the fixed versions to clone and check out each project (e.g. spring-cloud-sleuth: 2.1.0.RELEASE)

  • From the version analyzes the branch and checks it out. E.g.

    • for spring-cloud-release’s `Finchley.RELEASE version will resolve either Finchley branch or will fallback to main if there’s no Finchley branch.

    • for spring-cloud-sleuth’s `2.1.0.RELEASE version will resolve 2.1.x branch

  • Performs the release tasks per each project

  • Performs the post release tasks at the end of the release

  • Will update and run smoke test samples (for Spring Cloud it will be https://github.com/spring-cloud/spring-cloud-core-tests)

  • Will clone provided test samples and will update all versions to the latest ones

  • Will clone the release train wiki and update it with the latest release versions (for Spring Cloud it will be https://github.com/spring-projects/spring-cloud.wiki.git)

Important
For the meta-releaser to work we assume that the path to the custom configuration file for each project is always config/releaser.yml.
Note
If you want to run some projects in parallel you have to set the releaser.meta-release.release-groups property to state which projects should be released in parallel. Example:
releaser.meta-release.release-groups[0]=projectA,projectB,projectC

If in the list of projects you have projectA,projectB,projectC,projectD,projectE, then projectA,projectB,projectC will be released in parallel and then projectD and projectE sequentially.

How can I extend it?

The project consists of the following main modules

  • releaser-core - with the core logic for doing releases

  • relaser-spring - with the Spring setup of tasks and a flow execution

  • projects

    • where each project has their configuration properties and additional tasks

You can create your own project’s module and

  • if you want to completely rewrite the flow of the release, just set releaser.flow.default-enabled to false and create the whole flow from scratch

  • if you want to modify the current flow, you can add new tasks by just creating a bean of a given type that extends the ReleaserTask and set its order accordingly.

Example of creating a new ReleaseReleaserTask called BuildCustomStuffTask:

package releaser.my_project;

//...

import releaser.internal.Releaser;
import releaser.internal.spring.Arguments;
import releaser.internal.spring.ExecutionResult;
import releaser.internal.tasks.ReleaseReleaserTask;

@Component
public class BuildCustomStuffTask implements ReleaseReleaserTask {

	/**
	 * Order of this task. The higher value, the lower order.
	 */
	public static final int ORDER = 45;

	@Override
	public String name() {
		return "build_custom_stuff";
	}

	@Override
	public String shortName() {
		return "bcf";
	}

	@Override
	public String header() {
		return "BUILDING CUSTOM STUFF";
	}

	@Override
	public String description() {
		return "Builds custom stuff";
	}

	@Override
	public ExecutionResult runTask(Arguments args) {
		// do some custom stuff basing on the arguments
		return ExecutionResult.success();
	}

	@Override
	public int getOrder() {
		return BuildCustomStuffTask.ORDER;
	}

}

Each release or post release task can implement one of the following interfaces

  • ReleaserTask - marker interface for all release tasks

  • ReleaseReleaserTask - if a task is part of the main release process. That means that if it breaks, the whole release process should stop at once.

  • PostReleaseReleaserTask - marker interface for a post release task. If a post release task fails - the build continues but will be unstable.

  • SingleProjectReleaserTask - a release task for a single project.

  • ProjectPostReleaseReleaserTask - a post release task for a single project.

  • DryRunReleaseReleaserTask - a release task that should be executed during dry run mode.

  • TrainPostReleaseReleaserTask - a post release task that should be executed after the whole release train.

  • CompositeReleaserTask - a task that delegates work to other tasks.

In addition, your project can provide the following beans:

  • CustomBomParser - if you need to perform some additional BOM parsing. E.g. Spring Cloud adds spring-boot and spring-cloud-build versions when parsing the BOM project.

  • CustomProjectDocumentationUpdater - if you need to perform some custom logic when updating the project’s documentation.

  • CustomGithubIssues - if you need to perform additional logic when dealing with Github issues.

To run the project you should create your main class preferably under the releaser package and extend the ReleaserCommandLineRunner class.

package releaser;

import releaser.internal.options.Parser;
import releaser.internal.spring.ExecutionResultHandler;
import releaser.internal.spring.SpringReleaser;

import org.springframework.boot.SpringApplication;
import org.springframework.boot.WebApplicationType;
import org.springframework.boot.autoconfigure.SpringBootApplication;

@SpringBootApplication
public class ReleaserApplication extends ReleaserCommandLineRunner {

	public ReleaserApplication(SpringReleaser releaser,
			ExecutionResultHandler executionResultHandler, Parser parser) {
		super(releaser, executionResultHandler, parser);
	}

	public static void main(String[] args) {
		SpringApplication application = new SpringApplication(ReleaserApplication.class);
		application.setWebApplicationType(WebApplicationType.NONE);
		application.run(args);
	}

}

You can also extend the way the projects and tasks are parsed, flows are executed and the result is analyzed together with the printed report. To do that you should implement the following interfaces as beans:

  • SpringReleaser - performs the release, given the provided options

  • FlowRunner - knows how to execute a release and post release flow

  • ExecutionResultHandler - handles the result of the release

What should I do first?

Members of the Spring Cloud Team typically use this tool as follows. They first clone the releaser locally and build the jar manually

$ git clone [email protected]:spring-cloud/spring-cloud-release-tools.git
$ cd spring-cloud-release-tools
$ ./mvnw clean install
Important
You must set the value of the OAuth token. You can do it either via the command line --releaser.git.oauth-token=…​ or put it as an env variable in .bashrc or .zshrc e.g. export RELEASER_GIT_OAUTH_TOKEN=…​

How to run it (interactive mode)

Go to your project (e.g. Spring Cloud Sleuth)

$ git clone [email protected]:spring-cloud/spring-cloud-sleuth.git
$ cd spring-cloud-sleuth
$ # example of running the releaser agains Dalston.SR1 tag with 1.0.0.BUILD-SNAPSHOT version of the releaser
$ java -jar ~/repo/spring-cloud-release-tools/projects/spring-cloud/target/spring-cloud-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser

The application will start running from your working directory. Running this code follows the convention that you have the OAuth token environment variable set. It also assumes that you might have some custom configuration in config/releaser.yml file. This setting is optional - if you don’t have that file, nothing will happen.

Tip
It is important that you clone the repository you are going to release using SSH in order for the releaser to be able to push tags and commit changes automatically.

You will see text similar to this one

=== WHAT DO YOU WANT TO DO? ===

0) Perform a full release of this project without interruptions
1) Perform a full release of this project in a verbose mode (you'll be asked about skipping steps)
2) Update poms with versions from Spring Cloud Release
3) Build the project
4) Commit, tag and push the tag
5) Deploy the artifacts
6) Publish the docs
7) Go back to snapshots and bump originalVersion by patch
8) Push the commits
9) Close the milestone at Github
10) Create email / blog / tweet etc. templates

You can pick a range of options by using the hyphen - e.g. '2-4' will execute jobs [2,3,4]
You can execute all tasks starting from a job by using a hyphen and providing only one number - e.g. '8-' will execute jobs [8,9,10]
You can execute given tasks by providing a comma separated list of tasks - e.g. '3,7,8' will execute jobs [3,7,8]

You can press 'q' to quit

Just pick a number and continue! Pick either a full release or single steps. You can also pick ranges or multiple steps. You can also provide the range only with the starting step - that you will execute all steps starting from the given one.

Tip
Read before picking a number cause it might have changed between tool releases ;)

How to run it (automatic mode)

Go to your project (e.g. Spring Cloud Sleuth) and execute the application with -h or --help flag.

$ git clone [email protected]:spring-cloud/spring-cloud-sleuth.git
$ cd spring-cloud-sleuth
$ # example of running the releaser agains Dalston.SR1 tag with 1.0.0.BUILD-SNAPSHOT version of the releaser
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser -h

You will see a help screen looking like more or less like this

Here you can find the list of tasks in order

[release,releaseVerbose,metaRelease,postRelease,updatePoms,build,commit,deploy,docs,snapshots,push,closeMilestone,updateSagan,createTemplates,updateGuides,updateDocumentation]


Option                                Description
------                                -----------
-a, --start-from <String>             Starts all release task starting from the
                                        given task. Requires passing the task
                                        name (either one letter or the full
                                        name)
-b, --build [String]                  Build the project
-c, --commit [String]                 Commit, tag and push the tag
-d, --deploy [String]                 Deploy the artifacts
-f, --full-release [Boolean]          Do you want to do the full release of a
                                        single project? (default: false)
-g, --updateSagan [String]            Updating Sagan with release info
-h, --help [String]
-i, --interactive <Boolean>           Do you want to set the properties from
                                        the command line of a single project?
                                        (default: true)
-m, --closeMilestone [String]         Close the milestone at Github
-o, --docs [String]                   Publish the docs
-p, --push [String]                   Push the commits
-r, --range <String>                  Runs release tasks from the given range.
                                        Requires passing the task names with a
                                        hyphen. The first task is inclusive,
                                        the second inclusive. E.g. 's-m' would
                                        mean running 'snapshot', 'push' and
                                        'milestone' tasks
-s, --snapshots [String]              Go back to snapshots and bump
                                        originalVersion by patch
-t, --createTemplates [String]        Create email / blog / tweet etc. templates
--task-names, --tn <String>           Starts all release task for the given
                                        task names
-u, --updatePoms [String]             Update poms with versions from Spring
                                        Cloud Release
--ud, --updateDocumentation [String]  Updating documentation repository
--ug, --updateGuides [String]         Updating Spring Guides
-x, --meta-release <Boolean>          Do you want to do the meta release?
                                        (default: false)

Examples of usage:

Run 'build' & 'commit' & 'deploy'
java -jar jar.jar -b -c -d

Start from 'push'
java -jar releaser.jar -a push

Range 'docs' -> 'push'
java -jar releaser.jar -r o-p

The Releaser can use two sets of options. The configuration options like releaser.pom.branch and the task switches. For the tasks you can use either the full names or short switches. For example providing range of tasks via switches o-p is equivalent to full name docs-push.

A couple of examples:

Doing the full release in interactive mode (asking for skipping steps)
$ git clone [email protected]:spring-cloud/spring-cloud-sleuth.git
$ cd spring-cloud-sleuth
$ # example of running the releaser agains Dalston.SR1 tag with 1.0.0.BUILD-SNAPSHOT version of the releaser
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser --full-release
Doing the full release in non interactive mode (automatic release)
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser --full-release --interactive=false
Updating pom, closing milestone & createTemplates in interactive mode
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser -u -m -t
Running all tasks starting from 'push' (automatic)
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser -a push -i=false
Running tasks from 'docs' (inclusive) to 'push' (inclusive) (automatic)
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser -r d-p -i=false
Running single task 'closeMilestone' (automatic)
$ java -jar ~/repo/spring-cloud-release-tools/releaser-spring/target/releaser-spring-1.0.0.BUILD-SNAPSHOT.jar --releaser.pom.branch=vDalston.SR1 --spring.config.name=releaser --closeMilestone -i=false

How to run meta-release (automatic-mode)

All you have to do is run the jar with the releaser and pass the -x=true option to turn on meta-release and a list of fixed versions in the `--"releaser.fixed-versions[project-name]=project-version" format

$ java -jar projects/spring-cloud/target/spring-cloud-1.0.0.BUILD-SNAPSHOT.jar --spring.config.name=releaser -x=true --"releaser.fixed-versions[spring-cloud-sleuth]=2.0.1.BUILD-SNAPSHOT"
Important
For the meta release the startFrom or taskNames take into consideration the project names, not task names. E.g. you can start from spring-cloud-netflix project, or build only tasks with names spring-cloud-build,spring-cloud-sleuth.

Project options

Below you can find a table with all the releaser options.

Name Default Description

releaser.antora.spring-docs-actions-tag

Tag for Spring Docs Actions repo.

releaser.antora.spring-docs-actions-url

URL to Spring Docs Actions repo.

releaser.antora.spring-docs-ssh-host-key

releaser.antora.spring-docs-ssh-key-path

releaser.antora.spring-docs-ssh-username

releaser.antora.sync-antora-docs-command

Command to sync Antora docs.

releaser.bash.build-command

echo "{{systemProps}}"

Command to be executed to build the project. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.bash.deploy-command

echo "{{systemProps}}"

Command to be executed to deploy a built project. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.bash.deploy-guides-command

echo "{{systemProps}}"

Command to be executed to build and deploy guides project only. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.bash.generate-release-train-docs-command

echo "{{version}}"

Command to be executed to generate release train documentation.

releaser.bash.publish-docs-command

mkdir -p target && echo "{{version}}"

Command to be executed to publish documentation. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.bash.system-properties

Additional system properties that should be passed to the build / deploy commands. If present in other commands "{{systemProps}}" will be substituted with this property.

releaser.bash.wait-time-in-minutes

20

Max wait time in minutes for the process to finish.

releaser.bundles.create-project-release-bundle

false

releaser.bundles.create-release-train-release-bundle

false

releaser.bundles.distribute-project-release-bundle

false

releaser.bundles.distribute-release-train-source-bundle

false

releaser.bundles.repo-access-token

releaser.bundles.repo-url

https://usw1.packages.broadcom.com

releaser.bundles.repo-username

releaser.bundles.repos

releaser.commercial

false

releaser.fixed-versions

Project name to its version - overrides all versions retrieved from a release train repository like Spring Cloud Release.

releaser.flow.default-enabled

true

Should the default flow of jobs be preserved. If set to {@code false} will not register any jobs as beans, and it will be up to you to set the whole configuration of jobs.

releaser.git.all-test-sample-urls

Project to urls mapping. For each project will clone the test project and will update its versions.

releaser.git.cache-directory

Absolute path to a directory with cache for OkHTTP calls to GitHub.

releaser.git.clone-destination-dir

Where should the release train repo get cloned to. If {@code null} defaults to a temporary directory.

releaser.git.create-release-notes-for-milestone

false

If set to {@code false}, will not create release notes for milestone.

releaser.git.documentation-branch

Branch to check out for the documentation project.

releaser.git.documentation-url

URL to the documentation Git repository.

releaser.git.fetch-versions-from-git

true

If {@code true} then should fill the map of versions from Git. If {@code false} then picks fixed versions.

releaser.git.github-changelog-generator-url

https://github.com/spring-io/github-changelog-generator/releases/download/v0.0.8/github-changelog-generator.jar

URL to the fat jar with Github Changelog Generator.

releaser.git.number-of-checked-milestones

50

In order not to iterate endlessly over milestones we introduce a threshold of milestones that we will go through to find the matching milestone.

releaser.git.oauth-token

GitHub OAuth token to be used to interact with GitHub repo.

releaser.git.org-name

The organization name on Github.

releaser.git.password

Optional Git password. If not passed keys will be used for authentication.

releaser.git.release-train-bom-url

URL to a release train repository.

releaser.git.release-train-branch

Branch to check out for the release train.

releaser.git.release-train-docs-branch

Branch to check out for the release train docs.

releaser.git.release-train-docs-url

URL to the release train documentation.

releaser.git.release-train-wiki-page-prefix

Page prefix for the release train wiki. E.g. for [Spring-Cloud-Finchley-Release-Notes] it would be [Spring-Cloud].

releaser.git.release-train-wiki-url

URL to the release train wiki.

releaser.git.run-updated-samples

false

If set to {@code false}, will not update the test samples.

releaser.git.spring-project-branch

Branch to check out for the release train project.

releaser.git.spring-project-url

URL to the release train project page repository.

releaser.git.test-samples-branch

Branch to check out for the test samples.

releaser.git.test-samples-project-url

URL to test samples.

releaser.git.update-all-test-samples

false

If set to {@code false}, will not clone and update the samples for all projects.

releaser.git.update-documentation-repo

false

If {@code false}, will not update the documentation repository.

releaser.git.update-github-milestones

false

If set to {@code false}, will not update Github milestones.

releaser.git.update-release-train-docs

false

If set to {@code false}, will not update the release train docs.

releaser.git.update-release-train-wiki

false

If set to {@code false}, will not clone and update the release train wiki.

releaser.git.update-spring-guides

false

If set to {@code false}, will not update Spring Guides for a release train.

releaser.git.update-spring-project

false

If set to {@code false}, will not update the Spring Project for a release train. E.g. for Spring Cloud will not update https://cloud.spring.io .

releaser.git.update-start-spring-io

false

If set to {@code false}, will not update start.spring.io for a release train.

releaser.git.username

Optional Git username. If not passed keys will be used for authentication.

releaser.gradle.build-command

./gradlew clean build publishToMavenLocal --console=plain -PnextVersion={{nextVersion}} -PoldVersion={{oldVersion}} -PcurrentVersion={{version}} {{systemProps}}

Command to be executed to build the project If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.gradle.deploy-command

./gradlew publish --console=plain -PnextVersion={{nextVersion}} -PoldVersion={{oldVersion}} -PcurrentVersion={{version}} {{systemProps}}

Command to be executed to deploy a built project.

releaser.gradle.deploy-guides-command

./gradlew clean build deployGuides --console=plain -PnextVersion={{nextVersion}} -PoldVersion={{oldVersion}} -PcurrentVersion={{version}} {{systemProps}}

Command to be executed to build and deploy guides project only.

releaser.gradle.generate-release-train-docs-command

./gradlew generateReleaseTrainDocs --console=plain -PnextVersion={{nextVersion}} -PoldVersion={{oldVersion}} -PcurrentVersion={{version}} {{systemProps}}

Command to be executed to generate release train documentation.

releaser.gradle.gradle-props-substitution

A mapping that should be applied to {@code gradle.properties} in order to perform a substitution of properties. The mapping is from a property inside {@code gradle.properties} to the projects name. Example. <p> In {@code gradle.properties} you have {@code verifierVersion=1.0.0} . You want this property to get updated with the value of {@code spring-cloud-contract} version. Then it’s enough to do the mapping like this for this Releaser’s property: {@code verifierVersion=spring-cloud-contract}.

releaser.gradle.ignored-gradle-regex

List of regular expressions of ignored gradle props. Defaults to test projects and samples.

releaser.gradle.publish-docs-command

./gradlew publishDocs --console=plain -PnextVersion={{nextVersion}} -PoldVersion={{oldVersion}} -PcurrentVersion={{version}} {{systemProps}}

Command to be executed to publish documentation. If present "{{version}}" will be replaced by the provided version.

releaser.gradle.run-antora-command

./gradlew antora {{systemProps}}

Command to be executed to run Antora.

releaser.gradle.system-properties

Additional system properties that should be passed to the build / deploy commands. If present in other commands "{{systemProps}}" will be substituted with this property.

releaser.gradle.wait-time-in-minutes

20

Max wait time in minutes for the process to finish.

releaser.maven.build-command

./mvnw clean install -B -Pdocs {{systemProps}}

Command to be executed to build the project. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.maven.deploy-command

./mvnw deploy -DskipTests -B -Pfast,deploy {{systemProps}}

Command to be executed to deploy a built project. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.maven.deploy-guides-command

./mvnw clean verify deploy -B -Pguides,integration -pl guides {{systemProps}}

Command to be executed to build and deploy guides project only. If present "{{version}}" will be replaced by the provided version. "{{nextVersion}}" with the bumped snapshot version and "{{oldVersion}}" with the version before version updating.

releaser.maven.generate-release-train-docs-command

bash release_train.sh --retrieveversions --version {{version}} --ghpages --auto

Command to be executed to generate release train documentation.

releaser.maven.publish-docs-command

./mvnw deploy -DskipTests -B -Pfast,deploy,docs -pl docs {{systemProps}}

Command to be executed to publish documentation. If present "{{version}}" will be replaced by the provided version.

releaser.maven.run-antora-command

./mvnw antora -Pdocs {{systemProps}}

Command to be executed to run Antora.

releaser.maven.system-properties

Additional system properties that should be passed to the build / deploy commands. If present in other commands "{{systemProps}}" will be substituted with this property.

releaser.maven.wait-time-in-minutes

20

Max wait time in minutes for the process to finish.

releaser.meta-release.enabled

false

Are we releasing the whole suite of apps or only one?

releaser.meta-release.git-org-url

The URL of the Git organization. We’ll append each project’s name to it.

releaser.meta-release.projects-to-skip

Names of projects to skip deployment for meta-release.

releaser.meta-release.release-group-thread-count

4

Number of threads per release group. E.g. for thread count of 4 if there are 6 projects in a release group, 4 of them will be executed in parallel and 2 will wait for their turn.

releaser.meta-release.release-group-timeout-in-minutes

180

Timeout in minutes during which we’re waiting for a single composite task per a project to be executed. That means that if set to e.g. 180 then a release process for a single project should take at most 180 minutes.

releaser.meta-release.release-groups

If provided, allows to provide groups of projects that can be ran in parallel. E.g. {@code --releaser.meta-release.release-groups[0]=projectA,projectB,projectC} {@code --releaser.meta-release.release-groups[1]=projectD,projectE} {@code --releaser.meta-release.release-groups[2]=projectF,projectG} The order is still provided by the list of versions passed to the releaser. Basing on that order, and this value we are able to build a flow with projects.

releaser.meta-release.release-train-dependency-names

All the names of dependencies that should be updated with the release train project version.

releaser.meta-release.release-train-project-name

Name of the release train project.

releaser.pom.bom-version-pattern

The pattern to match a version property in a BOM. Remember to catch the dependency name in a group. E.g. "^(spring-cloud-.*)\\.version$".

releaser.pom.branch

main

Which branch of release train BOM should be checked out. Defaults to {@code main}.

releaser.pom.ignored-pom-regex

^.*\.git/.*$

List of regular expressions of ignored poms. Defaults to test projects and samples.

releaser.pom.pom-with-boot-starter-parent

Subfolder of the pom that contains the {@code spring-boot-starer-parent} dependency.

releaser.pom.this-train-bom

Subfolder of the pom that contains the versions for the release train.

releaser.post-release-tasks-only

false

If set to {@code true} will run only post release tasks.

releaser.sagan.base-url

https://api.spring.io

URL to the Sagan API.

releaser.sagan.boot-section-file-name

sagan-boot.adoc

Name of the ascii doc file with boot part of this project’s Sagan project page. Linked with {@link this#docsAdocsFile}.

releaser.sagan.docs-adocs-file

docs/src/main/asciidoc

Folder with asciidoctor files for docs.

releaser.sagan.index-section-file-name

sagan-index.adoc

Name of the ascii doc file with core part of this project’s Sagan project page. Linked with {@link this#docsAdocsFile}.

releaser.sagan.update-sagan

false

If set to {@code false} will not update Sagan.

releaser.skip-post-release-tasks

false

If set to {@code true} will not run post release tasks.

releaser.template.enabled

false

Should template generation be enabled.

releaser.template.template-folder

Folder in which blog, email etc. templates are stored.

releaser.versions.all-versions-file-url

https://raw.githubusercontent.com/spring-io/start.spring.io/master/start-site/src/main/resources/application.yml

Url to a file containing all the versions. Defaults to YAML from start.spring.io.

releaser.versions.bom-name

Name in the YAML from initilizr for BOM mappings.

releaser.working-dir

By default Releaser assumes running the program from the current working directory. If you want to change this behaviour - just change this value.

Tip
You can pass the options either via system properties or via application arguments. Example for system properties: java -Dreleaser.pom.branch=Camden.SR6 -jar target/releaser-spring-1.0.0.M1.jar Example for application arguments: java -jar target/releaser-spring-1.0.0.M1.jar --releaser.pom.branch=Camden.SR6
Important
For the GA release to be successful, it’s important that if the build / deploy command run a script (e.g. scripts/foo.sh) then inside foo.sh if you call a Maven build ./mvnw clean install then remember to pass all arguments of the script there too. E.g. ./mvnw clean install ${@}. That’s because the releaser will pass any system properties to the build / deploy command, such as system properties with keys and we need them to be passed inside the command executed by the releaser.

Examples

Keeping configuration in the project

If your project has some custom configuration (e.g. Spring Cloud Contract needs a script to be executed to build the project and properly merge the docs) then you can put a file named e.g. releaser.yml under config folder and run your application like this:

$ wget https://repo.spring.io/libs-milestone/org/springframework/cloud/internal/releaser-spring/1.0.0.M1/releaser-spring-1.0.0.M1.jar -O ../releaser-spring-1.0.0.M1.jar
$ java -jar target/releaser-spring-1.0.0.M1.jar --spring.config.name=releaser
Tip
Notice that we’re downloading the jar to a parent folder, not to target. That’s because target get cleaned during the build process
Important
For the meta-releaser to work we assume that the path to the configuration file is always config/releaser.yml.

Specifying A Branch

By deafult the releaser will default to using the main branch of spring-cloud-release. If you would like to use another branch you can specify it using the releaser.pom.branch property.

$ java -jar releaser-spring-1.0.0.M1.jar --releaser.pom.branch=Camden.SR6

Using Environment Variables

In some cases it might be easier to specify environment variables instead of passing parameters to releaser. For example, you might want to use environment variables if you are going to be releasing multiple projects, this keeps you from having to specify the same parameters for each release

$ export RELEASER_POM_BRANCH=Dalston.RELEASE
$ export RELEASER_GIT_OAUTH_TOKEN=...
$ wget https://repo.spring.io/libs-milestone/org/springframework/cloud/internal/releaser-spring/1.0.0.M1/releaser-spring-1.0.0.M1.jar -O releaser-spring-1.0.0.M1.jar
$ java -jar target/releaser-spring-1.0.0.M1.jar --releaser.working-dir=/path/to/project/root

FAQ

JSchException: Auth fail

You may get an exception similar to the following:

Caused by: org.eclipse.jgit.errors.TransportException: [email protected]:spring-cloud/spring-cloud-sleuth.git: Auth fail
    at org.eclipse.jgit.transport.JschConfigSessionFactory.getSession(JschConfigSessionFactory.java:160) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.transport.SshTransport.getSession(SshTransport.java:137) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.transport.TransportGitSsh$SshPushConnection.<init>(TransportGitSsh.java:322) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.transport.TransportGitSsh.openPush(TransportGitSsh.java:167) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.transport.PushProcess.execute(PushProcess.java:160) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.transport.Transport.push(Transport.java:1275) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    at org.eclipse.jgit.api.PushCommand.call(PushCommand.java:161) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    ... 25 common frames omitted
Caused by: com.jcraft.jsch.JSchException: Auth fail
    at com.jcraft.jsch.Session.connect(Session.java:512) ~[jsch-0.1.53.jar!/:na]
    at org.eclipse.jgit.transport.JschConfigSessionFactory.getSession(JschConfigSessionFactory.java:117) ~[org.eclipse.jgit-4.6.0.201612231935-r.jar!/:4.6.0.201612231935-r]
    ... 31 common frames omitted

To fix that just call, run the following commands before running the app:

# to run the agent
$ eval `ssh-agent`
# to store the pass in the agent
$ ssh-add ~/.ssh/id_rsa

Skipping version check

If you know what you’re doing and want to skip snapshot / milestone version check for poms or any other files, just set the following comment [@releaser:version-check-off] in the same line where the version appears. Example:

    <properties>
        <zipkin.version>1.19.2-M2</zipkin.version><!-- @releaser:version-check-off -->
        <zipkin-reporter.version>0.6.12</zipkin-reporter.version>
    </properties>

Building

Basic Compile and Test

To build the source you will need to install JDK 17.

Spring Cloud uses Maven for most build-related activities, and you should be able to get off the ground quite quickly by cloning the project you are interested in and typing

$ ./mvnw install
Note
You can also install Maven (>=3.3.3) yourself and run the mvn command in place of ./mvnw in the examples below. If you do that you also might need to add -P spring if your local Maven settings do not contain repository declarations for spring pre-release artifacts.
Note
Be aware that you might need to increase the amount of memory available to Maven by setting a MAVEN_OPTS environment variable with a value like -Xmx512m -XX:MaxPermSize=128m. We try to cover this in the .mvn configuration, so if you find you have to do it to make a build succeed, please raise a ticket to get the settings added to source control.

The projects that require middleware (i.e. Redis) for testing generally require that a local instance of [Docker](https://www.docker.com/get-started) is installed and running.

Documentation

The spring-cloud-build module has a "docs" profile, and if you switch that on it will try to build asciidoc sources from src/main/asciidoc. As part of that process it will look for a README.adoc and process it by loading all the includes, but not parsing or rendering it, just copying it to ${main.basedir} (defaults to ${basedir}, i.e. the root of the project). If there are any changes in the README it will then show up after a Maven build as a modified file in the correct place. Just commit it and push the change.

Working with the code

If you don’t have an IDE preference we would recommend that you use Spring Tools Suite or Eclipse when working with the code. We use the m2eclipse eclipse plugin for maven support. Other IDEs and tools should also work without issue as long as they use Maven 3.3.3 or better.

Activate the Spring Maven profile

Spring Cloud projects require the 'spring' Maven profile to be activated to resolve the spring milestone and snapshot repositories. Use your preferred IDE to set this profile to be active, or you may experience build errors.

Importing into eclipse with m2eclipse

We recommend the m2eclipse eclipse plugin when working with eclipse. If you don’t already have m2eclipse installed it is available from the "eclipse marketplace".

Note
Older versions of m2e do not support Maven 3.3, so once the projects are imported into Eclipse you will also need to tell m2eclipse to use the right profile for the projects. If you see many different errors related to the POMs in the projects, check that you have an up to date installation. If you can’t upgrade m2e, add the "spring" profile to your settings.xml. Alternatively you can copy the repository settings from the "spring" profile of the parent pom into your settings.xml.

Importing into eclipse without m2eclipse

If you prefer not to use m2eclipse you can generate eclipse project metadata using the following command:

$ ./mvnw eclipse:eclipse

The generated eclipse projects can be imported by selecting import existing projects from the file menu.

Important
There are 2 different versions of language level used in Spring Cloud Sleuth. Java 1.7 is used for main sources and Java 1.8 is used for tests. When importing your project to an IDE please activate the ide Maven profile to turn on Java 1.8 for both main and test sources. Of course remember that you MUST NOT use Java 1.8 features in the main sources. If you do so your app will break during the Maven build.

Spring Cloud Release Process

Spring Cloud Release Process

This section contains the instructions on releasiong the Spring Cloud project using the Spring Cloud Releaser.

Before you get started

  1. Create the Spring Cloud Release project on your local machine. For example:

git clone [email protected]:spring-cloud/spring-cloud-release.git
cd spring-cloud-release
  1. Pull all Spring Cloud projects to your local machine so that if there is a problem during release, you can make the tweaks to the affected project quickly.

Spring Cloud Build Releaser Instructions

  1. Go to the spring-cloud-release project and checkout the jenkins-releaser-config branch. Then pull the latest from the repository.

cd spring-cloud-release
git checkout jenkins-releaser-config
git pull origin jenkins-releaser-config
  1. Find the most recent release in the desired release train. In this document we will use: 2020_0_x.properties

  2. Create a copy of that file and set the name of the copy to <name-of-the-release>.properties (for example: 2020_0_2.properties)

  3. Edit this file and update all project versions to their latest release.

    1. The latest release for each project can be determined by navigating to the individual Github project and checking for commits since the last release, where the last release is marked by a commit from spring-cloud-issues. If there are commits since the last release, change the value in the properties file. If there are no commits since the last release (i.e. the last commit is from spring-cloud-issues) then do not increment the value.

  4. Make a note of the projects that did not increment their version number, as those projects will need to be specified later in the “RELEASER_PROJECTS_TO_SKIP” field in the Jenkins project spring-cloud-<release train>-meta-releaser

Note
Sometimes the release value for a project will need to be incremented by more than one, for example if there was a release for an individual project due to a CVE and there were commits made after that release. To determine the new version number, look for the latest version in the commit history from spring-cloud-issues.
  1. Commit the change

  2. Push the changes back to github. For example:

git push origin jenkins-releaser-config
  1. Request that project owners verify versions in the Spring Cloud Slack room by sharing a github link to the 2020_0_x.properties you just pushed.

  2. Now go to the spring-cloud-build-<train>-version-releaser job on Jenkins. For example: spring-cloud-build-Kilburn-main-releaser.

Note
The builder project is required to run first because it is required for spring-cloud-function and spring-cloud-stream. All other spring-cloud builds will run after spring-cloud-function and spring-cloud-stream have performed a successful release
  1. Click Build With Parameters on the left side of page

Build With Params
  1. In the RELEASE_VERSION column enter the name of the file you created without the properties extension

Set The Version
  1. Click the “DRY_RUN” option and then click Build button as shown below:

Set Dry Run
  1. Once the dry run is successfully complete we need to remove all of the artifacts from the dry run. To do this select the spring-cloud-purge-worker-artifacts-releaser job from the list of jobs.

  2. Once the purge work has completed successfully,

  3. Select Rebuild Last option on the left side of the page.

  4. Now go to the spring-cloud-build-<release train>-version-releaser job on Jenkins , Select the last build

  5. When build page appears click the Rebuild option.

Select Last Run
  1. Deselect “DRY_RUN” then click the Build button.

Full Spring Cloud Release

  1. Once Spring Cloud Stream and Function projects are released verify that all other builds are succeeding

  2. Now go to the Spring-cloud-<release train>-meta-releaser job on Jenkins. For example: spring-cloud-Kilburn-meta-releaser

  3. Click Build With Parameters on the left side of page

Build With Params
  1. Update RELEASE_VERSION with the current release and corresponds to the release file.

Set The Version
  1. Add spring-cloud-build to RELEASER_PROJECTS_TO_SKIP, so it won’t be rebuilt. Also any other projects that did not change in the properties files, add it to the RELEASER_PROJECTS_TO_SKIP so they can be excluded.

  2. Select Dry Run option

  3. Click Build

Set Dry Run
Tip
If there is a failure you can launch the build from the failed project. To do this: Click the Rebuild_Last option, then in the START FROM field insert the name of the project. Then click the Build.
Note
Spring Cloud K8’s Integration tests may time out. Restart the build. Select Rebuild Last option on the left side of the page.
  1. Upon a successful "DRY_RUN".

  2. Click "Rebuild Last" option on the left side of the page.

Rebuild Last
  1. When the build page is rendered.

  2. Deselect “DRY_RUN” then click the build button.

  3. Clear the Start_From field

  4. Click Rebuild

Commercial Releases

See this document from Trevor for more information on the requirement to create release bundles and distribute the release artifacts to the edge repository.

Creating and Distributing Release Bundles

The releaser will create release bundles for individual project releases as well as when doing a release for the entire release train.

Release bundles and distribution of those bundles are disabled by default.

To enable the creation of project release bundles set releaser.bundles.create-project-release-bundle=true.

The task which creates individual project release bundles, CreateProjectReleaseBundlePostReleaseTask, is run when doing a release of an individual project AND when doing a release train release.

To enable the creation of release train release bundles set releaser.bundles.distribute-release-train-source-bundle.

The task which creates a release train source bundle, CreateReleaseTrainReleaseBundlePostReleaseTask, is run as a release train PostReleaseTask.

To distribute a project release bundle to the edge repo you must set releaser.bundles.distribute-project-release-bundle=true.

The task which distributes the release bundle to the edge repo, DistributeProjectReleaseBundleTask, runs as a project post release task and runs after CreateProjectReleaseBundlePostReleaseTask. Unlike CreateProjectReleaseBundlePostReleaseTask, DistributeProjectReleaseBundleTask should not be run during a release train release. This is because distributing the release train source release bundle will take care of distributing all the individual project release bundles.

To distribute a release train source bundle to the edge repo you must set releaser.bundles.distribute-release-train-source-bundle=true.

The task which distributes release train release source bundles, DistributeReleaseTrainSourceBundleTask, runs as a release train post release task.

Release bundles and distribution of those bundles only occurs releaser.commercial=true, it is not a snapshot release, and is not a dry run.

Note
Distribution of release bundles to the edge repo can only be done on a CI system like Jenkins.

Creating and Distributing Release Bundles On Jenkins

Our Jenkins jobs have been updated to allow the creation and distribution of release bundles for commercial releases.

When releasing individual projects you will see 2 new post release tasks in the job options

Project Release Bundles

When these options are checked the correct properties will be passed to the releaser when run to create and distribute release bundles for an individual project release.

If you just want to create and distribute the release bundles for an individual project without doing an entire release make sure the two check boxes are checked and then add createReleaseBundle,distributeProjectReleaseBundleTask in the TASK_NAMES field and specify the RELEASE_VERSION you want to create and distribute the release bundles for.

Similar options exist for the Jenkins jobs for the meta-release.

Release Train Source Release Bundles

If you just want to create the release train source release bundles and distribute them without doing an entire release you can select RELEASER_POST_RELEASE_ONLY, uncheck the other post release tasks in the job configuration, but leaving RELEASER_PUBLISH_RELEASE_BUNDLES and DISTRIBUTE_RELEASE_BUNDLES checked.

Verify Distribution Of Artifacts

Note
For Broadcom employees access to the Broadcom Customer Support Portal can be found under Okta.

Contributing

Spring Cloud is released under the non-restrictive Apache 2.0 license, and follows a very standard Github development process, using Github tracker for issues and merging pull requests into master. If you want to contribute even something trivial please do not hesitate, but follow the guidelines below.

Sign the Contributor License Agreement

Before we accept a non-trivial patch or pull request we will need you to sign the Contributor License Agreement. Signing the contributor’s agreement does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do. Active contributors might be asked to join the core team, and given the ability to merge pull requests.

Code of Conduct

This project adheres to the Contributor Covenant code of conduct. By participating, you are expected to uphold this code. Please report unacceptable behavior to [email protected].

Code Conventions and Housekeeping

None of these is essential for a pull request, but they will all help. They can also be added after the original pull request but before a merge.

  • Use the Spring Framework code format conventions. If you use Eclipse you can import formatter settings using the eclipse-code-formatter.xml file from the Spring Cloud Build project. If using IntelliJ, you can use the Eclipse Code Formatter Plugin to import the same file.

  • Make sure all new .java files to have a simple Javadoc class comment with at least an @author tag identifying you, and preferably at least a paragraph on what the class is for.

  • Add the ASF license header comment to all new .java files (copy from existing files in the project)

  • Add yourself as an @author to the .java files that you modify substantially (more than cosmetic changes).

  • Add some Javadocs and, if you change the namespace, some XSD doc elements.

  • A few unit tests would help a lot as well — someone has to do it.

  • If no-one else is using your branch, please rebase it against the current master (or other target branch in the main project).

  • When writing a commit message please follow these conventions, if you are fixing an existing issue please add Fixes gh-XXXX at the end of the commit message (where XXXX is the issue number).

Checkstyle

Spring Cloud Build comes with a set of checkstyle rules. You can find them in the spring-cloud-build-tools module. The most notable files under the module are:

spring-cloud-build-tools/
└── src
    ├── checkstyle
    │   └── checkstyle-suppressions.xml (3)
    └── main
        └── resources
            ├── checkstyle-header.txt (2)
            └── checkstyle.xml (1)
  1. Default Checkstyle rules

  2. File header setup

  3. Default suppression rules

Checkstyle configuration

Checkstyle rules are disabled by default. To add checkstyle to your project just define the following properties and plugins.

pom.xml
<properties>
<maven-checkstyle-plugin.failsOnError>true</maven-checkstyle-plugin.failsOnError> (1)
        <maven-checkstyle-plugin.failsOnViolation>true
        </maven-checkstyle-plugin.failsOnViolation> (2)
        <maven-checkstyle-plugin.includeTestSourceDirectory>true
        </maven-checkstyle-plugin.includeTestSourceDirectory> (3)
</properties>

<build>
        <plugins>
            <plugin> (4)
                <groupId>io.spring.javaformat</groupId>
                <artifactId>spring-javaformat-maven-plugin</artifactId>
            </plugin>
            <plugin> (5)
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-checkstyle-plugin</artifactId>
            </plugin>
        </plugins>

    <reporting>
        <plugins>
            <plugin> (5)
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-checkstyle-plugin</artifactId>
            </plugin>
        </plugins>
    </reporting>
</build>
  1. Fails the build upon Checkstyle errors

  2. Fails the build upon Checkstyle violations

  3. Checkstyle analyzes also the test sources

  4. Add the Spring Java Format plugin that will reformat your code to pass most of the Checkstyle formatting rules

  5. Add checkstyle plugin to your build and reporting phases

If you need to suppress some rules (e.g. line length needs to be longer), then it’s enough for you to define a file under ${project.root}/src/checkstyle/checkstyle-suppressions.xml with your suppressions. Example:

projectRoot/src/checkstyle/checkstyle-suppresions.xml
<?xml version="1.0"?>
<!DOCTYPE suppressions PUBLIC
		"-//Puppy Crawl//DTD Suppressions 1.1//EN"
		"https://www.puppycrawl.com/dtds/suppressions_1_1.dtd">
<suppressions>
	<suppress files=".*ConfigServerApplication\.java" checks="HideUtilityClassConstructor"/>
	<suppress files=".*ConfigClientWatch\.java" checks="LineLengthCheck"/>
</suppressions>

It’s advisable to copy the ${spring-cloud-build.rootFolder}/.editorconfig and ${spring-cloud-build.rootFolder}/.springformat to your project. That way, some default formatting rules will be applied. You can do so by running this script:

$ curl https://raw.githubusercontent.com/spring-cloud/spring-cloud-build/master/.editorconfig -o .editorconfig
$ touch .springformat

IDE setup

Intellij IDEA

In order to setup Intellij you should import our coding conventions, inspection profiles and set up the checkstyle plugin. The following files can be found in the Spring Cloud Build project.

spring-cloud-build-tools/
└── src
    ├── checkstyle
    │   └── checkstyle-suppressions.xml (3)
    └── main
        └── resources
            ├── checkstyle-header.txt (2)
            ├── checkstyle.xml (1)
            └── intellij
                ├── Intellij_Project_Defaults.xml (4)
                └── Intellij_Spring_Boot_Java_Conventions.xml (5)
  1. Default Checkstyle rules

  2. File header setup

  3. Default suppression rules

  4. Project defaults for Intellij that apply most of Checkstyle rules

  5. Project style conventions for Intellij that apply most of Checkstyle rules

Code style
Figure 1. Code style

Go to FileSettingsEditorCode style. There click on the icon next to the Scheme section. There, click on the Import Scheme value and pick the Intellij IDEA code style XML option. Import the spring-cloud-build-tools/src/main/resources/intellij/Intellij_Spring_Boot_Java_Conventions.xml file.

Code style
Figure 2. Inspection profiles

Go to FileSettingsEditorInspections. There click on the icon next to the Profile section. There, click on the Import Profile and import the spring-cloud-build-tools/src/main/resources/intellij/Intellij_Project_Defaults.xml file.

Checkstyle

To have Intellij work with Checkstyle, you have to install the Checkstyle plugin. It’s advisable to also install the Assertions2Assertj to automatically convert the JUnit assertions

Checkstyle

Go to FileSettingsOther settingsCheckstyle. There click on the + icon in the Configuration file section. There, you’ll have to define where the checkstyle rules should be picked from. In the image above, we’ve picked the rules from the cloned Spring Cloud Build repository. However, you can point to the Spring Cloud Build’s GitHub repository (e.g. for the checkstyle.xml : https://raw.githubusercontent.com/spring-cloud/spring-cloud-build/master/spring-cloud-build-tools/src/main/resources/checkstyle.xml). We need to provide the following variables:

Important
Remember to set the Scan Scope to All sources since we apply checkstyle rules for production and test sources.

Duplicate Finder

Spring Cloud Build brings along the basepom:duplicate-finder-maven-plugin, that enables flagging duplicate and conflicting classes and resources on the java classpath.

Duplicate Finder configuration

Duplicate finder is enabled by default and will run in the verify phase of your Maven build, but it will only take effect in your project if you add the duplicate-finder-maven-plugin to the build section of the projecst’s pom.xml.

pom.xml
<build>
    <plugins>
        <plugin>
            <groupId>org.basepom.maven</groupId>
            <artifactId>duplicate-finder-maven-plugin</artifactId>
        </plugin>
    </plugins>
</build>

For other properties, we have set defaults as listed in the plugin documentation.

You can easily override them but setting the value of the selected property prefixed with duplicate-finder-maven-plugin. For example, set duplicate-finder-maven-plugin.skip to true in order to skip duplicates check in your build.

If you need to add ignoredClassPatterns or ignoredResourcePatterns to your setup, make sure to add them in the plugin configuration section of your project:

<build>
    <plugins>
        <plugin>
            <groupId>org.basepom.maven</groupId>
            <artifactId>duplicate-finder-maven-plugin</artifactId>
            <configuration>
                <ignoredClassPatterns>
                    <ignoredClassPattern>org.joda.time.base.BaseDateTime</ignoredClassPattern>
                    <ignoredClassPattern>.*module-info</ignoredClassPattern>
                </ignoredClassPatterns>
                <ignoredResourcePatterns>
                    <ignoredResourcePattern>changelog.txt</ignoredResourcePattern>
                </ignoredResourcePatterns>
            </configuration>
        </plugin>
    </plugins>
</build>