Arms Reach Pi Enabled
- Introduction
- Requirements
- Recommended modules
- Installation
- Configuration
- Troubleshooting
- FAQ
- Maintainers
ARPiE is an alpha project that allows users the ability to configure their Raspberry Pi 3 as a 3G Router with little to no effort. Currently the feature list is a bit lacking, but we plan on continuing updates and bringing more to the platform. Enjoy!
-
For a full description of the project visit: https://arpie.jeymz.xyz
-
To submit bug reports and feature suggestions e-mail: [email protected]
-
To submit code improvements or help with development e-mail [email protected]
ARPiE Requires The Below Software/Hardware: SOFTWARE:
- Raspbian Wheezy Build
- hostapd
- dnsmasq
- wvdial
- ppp
HARDWARE:
- Raspberry Pi 3
- Huawei E303, E353, E173 (Other varients may work, but have not been tested)
HARDWARE:
- MoPi Raspberry Pi Hat (Used for multi power source configuration)
SOFTWARE:
- simbamond
-
Copy the entire ARPiE folder to /home/pi/
-
Navigate to the folder and execute the config script with sudo permissions ie: sudo ./config
-
The First switch is the Device Name This name can be anything, but cannot contain spaces.
-
The Second switch is the Active Cores Number 1-4 Must be a number between 1 and 4
-
The Third switch is for Carrier / APN Selection Current Carriers include Aeris and Hologram. -Hologram is: IO -Aeris AT&T is: AATT -Aeris is: A -Wyless ATT is: ATT
-
No Wireless AP
-
Verify hostapd and dnsmasq are installed
-
Uplug the 3G connection until a reboot completes, then wait for 10 minutes
-
-
No 3G Connection
-
Verify WVDial and ppp are installed
-
Verify APN/Carrier Settings are properly configured
-
Verify you have a supported 3G USB Modem
-
Q: My Carrier/APN setting wont connect
A: Because this project stemmed from a specific focus we do not have a large selection of APN/Carriers to choose from. Please send an e-mail with your APN and Carrier to [email protected] and we will provide you with a config within 24 business hours
Q: Features not working the way I want
A: Again, because this project stemmed from a specific focus it may not behave the way you would like. If you encounter any issues or missing configurability options please send an e-mail to [email protected] with your request and we will try our best to accomidate your issue
Q: This seems really clunk A: That's because it is. I built this entire thing from scratch for a specific need and have little coding experience in regards to linux. I promise I am working on making a more robust version, but until then please let me know your specific issue by either e-mailing me at [email protected] or commenting on our wordpress at arpie.jeymz.xyz. Please keep comments in the correct version area so we can isolate your requests with the corresponding releases
Current maintainer:
- Jeymz - http://arpie.jeymz.xyz
I am currently the only person working on this code. If I have sparked your interest, or you wish to contribute please e-mail me with your code suggestions at [email protected]