RISCV-DV is a SV/UVM based open-source instruction generator for RISC-V processor verification. It currently supports the following features:
- Supported instruction set: RV32IMC, RV64IMC
- Supported privileged mode: machine mode, supervisor mode, user mode
- Page table randomization and exception
- Privileged CSR setup randomization
- Trap/interrupt handling
- Test suite to stress test MMU
- Support sub-programs and random program calls
- Support illegal instruction and HINT instruction
- Random forward/backward branch instructions
- Supports mixing directed instructions with random instruction stream
- Supports co-simulation with multiple ISS : spike, riscv-ovpsim
A CSR test generation script written in Python is also provided, to generate a directed test suite that stresses all CSR instructions on all of the CSRs that the core implements.
To be able to run the instruction generator, you need to have an RTL simulator which supports SystemVerilog and UVM 1.2. This generator has been verified with Synopsys VCS, Cadence Incisive/Xcelium, and Mentor Questa simulators. Please make sure the EDA tool environment is properly setup before running the generator.
To be able to run the CSR generation script, the open-source bitstring
Python library is required (bitstring).
To install this library, either clone the repository and run the setup.py
setup script, or run only one of the below commands:
1) sudo apt-get install python3-bitstring (or your OS-specific package manager)
2) pip install bitstring
A simple script "run.py" is provided for you to run a single test or a regression.
You can use --help to get the complete command reference:
python3 run.py --help
Here is the command to run a single test:
python3 run.py --test=riscv_arithmetic_basic_test
You can specify the simulator by "-simulator" option
python3 run.py --test riscv_arithmetic_basic_test --simulator ius
python3 run.py --test riscv_arithmetic_basic_test --simulator vcs
python3 run.py --test riscv_arithmetic_basic_test --simulator questa
The complete test list can be found in yaml/testlist.yaml. To run a full regression, simply use below command
python3 run.py
You can also run multiple generator jobs in parallel through LSF
python3 run.py --lsf_cmd="bsub -Is"
Here's a few more examples of the run command:
// Run a single test 10 times
python3 run.py --test riscv_page_table_exception_test --iterations 10
// Run a test with verbose logging
python3 run.py --test riscv_page_table_exception_test --verbose
// Run a test with a specified seed
python3 run.py --test riscv_page_table_exception_test --seed 123
// Skip the generation, run ISS simulation with previously generated program
python3 run.py --test riscv_page_table_exception_test --steps iss_sim
// Run the generator only, do not compile and simluation with ISS
python3 run.py --test riscv_page_table_exception_test --steps gen
// Compile the generator only, do not simulate
python3 run.py --test riscv_page_table_exception_test --co
....
The CSR generation script is located at scripts/gen_csr_test.py. The CSR test code that this script generates will execute every CSR instruction on every processor implemented CSR, writing values to the CSR and then using a prediction function to calculate a reference value that will be written into another GPR. The reference value will then be compared to the value actually stored in the CSR to determine whether to jump to the failure condition or continue executing, allowing it to be completely self checking. This script has been integrated with run.py. If you want to run it separately, you can get the command reference with --help:
python3 scripts/gen_csr_test.py --help
# test : Assembly test name
# description : Description of this test
# gen_opts : Instruction generator options
# iterations : Number of iterations of this test
# no_iss : Enable/disable ISS simulation (Optional)
# gen_test : Test name used by the instruction generator
# rtl_test : RTL simulation test name
# cmp_opts : Compile options passed to the instruction generator
# sim_opts : Simulation options passed to the instruction generator
# no_post_compare : Enable/disable log comparison (Optional)
# compare_opts : Options for the RTL & ISS trace comparison
- test: riscv_arithmetic_basic_test
description: >
Arithmetic instruction test, no load/store/branch instructions
gen_opts: >
+instr_cnt=10000
+num_of_sub_program=0
+no_fence=1
+no_data_page=1'b1
+no_branch_jump=1'b1
+boot_mode=m
iterations: 2
gen_test: riscv_instr_base_test
rtl_test: core_base_test
Note: To automatically generate CSR tests without having to explicitly run the
script, include riscv_csr_test in the testlist as shown in the example YAML
file above.
The default configuration of the instruction generator is for RV64IMC RISC-V processors with address translation capability. You might want to configure the generator according the feature of your processor.
The static setting of the processor src/riscv_core_setting.sv
// Bit width of RISC-V GPR
parameter int XLEN = 64;
// Parameter for SATP mode, set to BARE if address translation is not supported
parameter satp_mode_t SATP_MODE = SV39;
// Supported Privileged mode
privileged_mode_t supported_privileged_mode[] = {USER_MODE,
SUPERVISOR_MODE,
MACHINE_MODE};
// Unsupported instructions
riscv_instr_name_t unsupported_instr[] = {};
// ISA supported by the processor
riscv_instr_group_t supported_isa[] = {RV32I, RV32M, RV64I, RV64M};
...
| Option | Description | Default |
|---|---|---|
| num_of_tests | Number of assembly tests to be generated | 1 |
| num_of_sub_program | Number of sub-program in one test | 5 |
| instr_cnt | Instruction count per test | 200 |
| enable_page_table_exception | Enable page table exception | 0 |
| no_ebreak | Disable ebreak instruction | 1 |
| no_wfi | Disable WFI instruction | 1 |
| no_branch_jump | Disable branch/jump instruction | 0 |
| no_load_store | Disable load/store instruction | 0 |
| no_csr_instr | Disable CSR instruction | 0 |
| no_fence | Disable fence instruction | 0 |
| enable_illegal_instruction | Enable illegal instructions | 0 |
| enable_hint_instruction | Enable HINT instruction | 0 |
| boot_mode | m:Machine mode, s:Supervisor mode, u:User mode | m |
| no_directed_instr | Disable directed instruction stream | 0 |
| enable_interrupt | Enable MStatus.MIE, used in interrupt test | 0 |
| empty_debug_section | Disables randomized debug_rom section | 0 |
This YAML description file of all CSRs is only required for the privileged CSR test. All other standard tests do not use this description.
CSR descriptions in YAML format
- csr: CSR_NAME
description: >
BRIEF_DESCRIPTION
address: 0x###
privilege_mode: MODE (D/M/S/H/U)
rv32:
- MSB_FIELD_NAME:
- description: >
BRIEF_DESCRIPTION
- type: TYPE (WPRI/WLRL/WARL/R)
- reset_val: RESET_VAL
- msb: MSB_POS
- lsb: LSB_POS
- ...
- ...
- LSB_FIELD_NAME:
- description: ...
- type: ...
- ...
rv64:
- MSB_FIELD_NAME:
- description: >
BRIEF_DESCRIPTION
- type: TYPE (WPRI/WLRL/WARL/R)
- reset_val: RESET_VAL
- msb: MSB_POS
- lsb: LSB_POS
- ...
- ...
- LSB_FIELD_NAME:
- description: ...
- type: ...
- ...
To specify what ISA width should be generated in the test, simply include the matching rv32/rv64/rv128 entry and fill in the appropriate CSR field entries.
Please refer to src/src/riscv_load_store_instr_lib.sv for an example on how to add a new instruction stream. After the new instruction stream is created, you can use a runtime option to mix it with random instructions
//+directed_instr_n=instr_sequence_name,frequency(number of insertions per 1000 instructions)
+directed_instr_5=riscv_multi_page_load_store_instr_stream,4
- Install riscv-gcc toolchain
- Set environment variable RISCV_GCC to the directory of the RISC-V gcc executable. (example: <install_dir>/bin/riscv32-unknown-elf-gcc)
Currently three ISS are supported, the default ISS is spike. You can install any one of below to run ISS simulation.
- spike setup
- Follow the steps to build spike
- Make sure RISCV_ENABLE_COMMITLOG is defined in config.h.in
- Set environment variable SPIKE_PATH to the directory of the spike binary
- Follow the steps to build spike
- riscv-ovpsim setup
- Download the riscv-ovpsim binary
- Set environment variable OVPSIM_PATH to the directory of the ovpsim binary
- sail-riscv setup
- Follow the steps to install sail-riscv
- Set environment variable SAIL_RISCV to the sail-riscv binary
You can use -iss to run with different ISS.
// Run ISS with spike
python3 run.py --test riscv_page_table_exception_test --iss spike
// Run ISS with riscv-ovpsim
python3 run.py --test riscv_rand_instr_test --iss ovpsim
// Run ISS with sail-riscv
python3 run.py --test riscv_rand_instr_test --iss sail
To run with ISS simulation for RV32IMC, you can specify ISA and ABI from command line like this:
// Run a full regression with RV32IMC
python3 run.py --isa rv32imc --mabi ilp32
We have added a flow to run ISS simulation with both spike and riscv-ovpsim, the instruction trace from these runs will be cross compared. This could greatly speed up your development of new test without the need to simulate against a real RISC-V processor.
python3 run.py --test=riscv_rand_instr_test --iss=spike,ovpsim
python3 run.py --test=riscv_rand_instr_test --iss=spike,sail
You can add a new entry in iss.yaml
- iss: new_iss_name
path_var: ISS_PATH
cmd: >
<path_var>/iss_executable --isa=<variant> -l <elf>
Simulate with the new ISS
python3 run.py --test riscv_page_table_exception_test --iss new_iss_name
We have collaborated with LowRISC to apply this flow for IBEX RISC-V core verification. You can use it as a reference to setup end-to-end co-simulation flow. It's also a good reference for customizing the generator without getting impacted by upstream changes. We have plan to open-source the end-to-end environment of other advanced RISC-V processors. Stay tuned!
Please file an issue under this repository for any bug report / integration issue / feature request. We are looking forward to knowing your experience of using this flow and how we can make it better together.
We definitely welcome external contributions. We hope it could be a collaborative effort to build a strong open source RISC-V processor verification platform. Free feel to submit your pull request for review. Please refer to CONTRIBUTING.md for license related questions.
We have some work in progress which will be part of future releases:
- Privileged CSR test suite.
- Coverage model.
- Debug mode support
Note: The flow mentioned below will soon be deprecated. Please switch to new flow.
A simple script "run" is provided for you to run a single test or a regression. Here is the command to run a single test:
./run -test riscv_instr_base_test
You can specify the simulator by "-tool" option
./run -test riscv_instr_base_test -tool irun
./run -test riscv_instr_base_test -tool vcs
./run -test riscv_instr_base_test -tool questa
The complete test list can be found in testlist. To run a full regression, you can just specify the test name to "all".
./run -test all
The script will run each test in the test list sequentially with the iteration count specified in the "testlist". All the generated RISC-V assembly will be listed when the regression is done. If it is successful, you should see the following output:
===========================================================
Generated RISC-V assembly tests
----------------------------------------------------------
./out_2018-11-20/asm_tests/riscv_arithmetic_basic_test.0.S
./out_2018-11-20/asm_tests/riscv_machine_mode_rand_test.0.S
./out_2018-11-20/asm_tests/riscv_mmu_stress_test.0.S
./out_2018-11-20/asm_tests/riscv_mmu_stress_test.1.S
./out_2018-11-20/asm_tests/riscv_no_fence_test.0.S
./out_2018-11-20/asm_tests/riscv_page_table_exception_test.0.S
./out_2018-11-20/asm_tests/riscv_page_table_exception_test.1.S
./out_2018-11-20/asm_tests/riscv_privileged_mode_rand_test.0.S
./out_2018-11-20/asm_tests/riscv_privileged_mode_rand_test.1.S
./out_2018-11-20/asm_tests/riscv_rand_instr_test.0.S
./out_2018-11-20/asm_tests/riscv_rand_instr_test.1.S
./out_2018-11-20/asm_tests/riscv_rand_jump_test.0.S
./out_2018-11-20/asm_tests/riscv_sfence_exception_test.0.S
Here's a few more examples of the run command:
// Run a single test 10 times
./run -test riscv_page_table_exception_test -n 10
// Run a test with a specified seed
./run -test riscv_page_table_exception_test -seed 123
// Run a test with addtional runtime options, separated with comma
./run -test riscv_rand_instr_test -runo +instr_cnt=10000,+no_fence=1
// Two steps compile and simulation (Avoid multiple compilation)
./run -co # compile only
# Generate multiple tests
./run -so -test riscv_rand_instr_test -n 10
./run -so -test riscv_mmu_stress_test -n 20
....
This is not an officially supported Google product.