v6.7.5-scx1 #12

Byte-Lab · 2024-02-17T05:27:56Z

No description provided.

[ Upstream commit c9b528c ] This mostly reverts commit 6bd97bf ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. Reported-by: Jan Kara <[email protected]> Fixes: 6bd97bf ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b73e43d ] In case of long format of qDMA command descriptor, there are one frame descriptor, three entries in the frame list and two data entries. So the size of dma_pool_create for these three fields should be the same with the total size of entries respectively, or the contents may be overwritten by the next allocated descriptor. Fixes: 7fdf9b0 ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs") Signed-off-by: Guanhua Gao <[email protected]> Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bc9847c ] Propagate the TR response status to the device using BCDMA split-channels. For example CSI-RX driver should be able to check if a frame was not transferred completely (short packet) and needs to be discarded. Fixes: 25dcb5d ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Jai Luthra <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 968bc1d ] This dma_alloc_coherent() is undone in the remove function, but not in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix the issue in the probe and simplify the remove function. Fixes: b092529 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3aa58cb ] This dma_alloc_coherent() is undone neither in the remove function, nor in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix both issues. Fixes: b092529 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f74c35b ] Commit 2be22aa ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi: <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc */ which would translate to: {.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 } but was translated to: {.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 } So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018 Fixes: 2be22aa ("phy: qcom-qmp-usb: populate offsets configuration") Signed-off-by: Mantas Pucka <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 62a5df4 ] Commit 23fd679 ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses separate serdes init sequence for IPQ6018. Since already existing IPQ9574 serdes init sequence is identical, just reuse it and fix failing USB3 mode in IPQ6018. Fixes: 23fd679 ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") Signed-off-by: Mantas Pucka <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 249abaf ] Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 441a681 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit bb177a8 ] Start a new set of shell tests for testing perf script. The initial contribution is checking that some perf db-export functionality works as reported in this regression by Ben Gainey <[email protected]>: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Ben Gainey <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Stable-dep-of: 2dac1f0 ("perf test: Fix 'perf script' tests on s390") Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2dac1f0 ] In linux next repo, test case 'perf script tests' fails on s390. The root case is a command line invocation of 'perf record' with call-graph information. On s390 only DWARF formatted call-graphs are supported and only on software events. Change the command line parameters for s390. Output before: # perf test 89 89: perf script tests : FAILED! # Output after: # perf test 89 89: perf script tests : Ok # Fixes: 0dd5041 ("perf addr_location: Add init/exit/copy functions") Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: Thomas Richter <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7814fe2 ] The 'Session topology' test currently fails with this message when evlist__new_default() opens more than one event: 32: Session topology : --- start --- templ file: /tmp/perf-test-vv5YzZ Using CPUID 0x00000000410fd070 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xb00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5 non matching sample_type FAILED tests/topology.c:73 can't get session ---- end ---- Session topology: FAILED! This is because when re-opening the file and parsing the header, Perf expects that any file that has more than one event has the sample ID flag set. Perf record already sets the flag in a similar way when there is more than one event, so add the same logic to evlist__new_default(). evlist__new_default() is only currently used in tests, so I don't expect this change to have any other side effects. The other tests that use it don't save and re-open the file so don't hit this issue. The session topology test has been failing on Arm big.LITTLE platforms since commit 251aa04 ("perf parse-events: Wildcard most "numeric" events") when evlist__new_default() started opening multiple events for 'cycles'. Fixes: 251aa04 ("perf parse-events: Wildcard most "numeric" events") Reviewed-by: Ian Rogers <[email protected]> Signed-off-by: James Clark <[email protected]> [ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ] Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Ian Rogers <[email protected]> Tested-by: Kan Liang <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a22fe1d ] is_slave_direction() should return true when direction is DMA_DEV_TO_DEV. Fixes: 49920bc ("dmaengine: add new enum dma_transfer_direction") Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7104ba0 ] If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306 ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e77e15f ] When the server reports query network interface info call as unsupported following a tree connect, it means that multichannel is unsupported, even if the server capabilities report otherwise. When this happens, cifs_chan_skip_or_disable is called to disable multichannel on the client. However, we only need to call this when multichannel is currently setup. Fixes: f591062 ("cifs: handle servers that still advertise multichannel after disabling") Signed-off-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6aac002 ] After the interface selection policy change to do a weighted round robin, each iface maintains a weight_fulfilled. When the weight_fulfilled reaches the total weight for the iface, we know that the weights can be reset and ifaces can be allocated from scratch again. During channel allocation failures on a particular channel, weight_fulfilled is not incremented. If a few interfaces are inactive, we could end up in a situation where the active interfaces are all allocated for the total_weight, and inactive ones are all that remain. This can cause a situation where no more channels can be allocated further. This change fixes it by increasing weight_fulfilled, even when channel allocation failure happens. This could mean that if there are temporary failures in channel allocation, the iface weights may not strictly be adhered to. But that's still okay. Fixes: a6d8fb5 ("cifs: distribute channels across interfaces based on speed") Signed-off-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…nown case [ Upstream commit 77e8aad ] Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the BPC unknown case, the additional shift causes spill over to the other bits of the [DP_CONFIGURATION_CTRL] register. Fix this by changing the return value of dp_link_get_test_bits_depth() in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT). Fixes: c943b49 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/573989/ Link: https://lore.kernel.org/r/[email protected] [[email protected]: fix minor checkpatch warning to align with opening braces] Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…case [ Upstream commit fcccdaf ] MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b49 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/574888/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7f3d03c ] The commit 8b45a26 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Reported-by: Dan Carpenter <[email protected]> Fixes: ae4d721 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/574878/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3a3ef39 ] The function to add an interface may be called without a previous removal if the HW is being reconfigured. As such, only add the symlink if the hardware is not being reconfigured due to a HW_RESTART. Fixes: c36235a ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Benjamin Berg <[email protected]> Reviewed-by: Gregory Greenman <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a7a6a01 ] The recently introduced EFI memory attributes protocol should be used if it exists to ensure that the memory allocation created for the kernel permits execution. This is needed for compatibility with tightened requirements related to Windows logo certification for x86 PCs. Currently, we simply strip the execute protect (XP) attribute from the entire range, but this might be rejected under some firmware security policies, and so in a subsequent patch, this will be changed to only strip XP from the executable region that runs early, and make it read-only (RO) as well. In order to catch any issues early, ensure that the memory attribute protocol works as intended, and give up if it produces spurious errors. Note that the DXE services based fallback was always based on best effort, so don't propagate any errors returned by that API. Fixes: a1b87d5 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2f77465 ] The EFI stub's kernel placement logic randomizes the physical placement of the kernel by taking all available memory into account, and picking a region at random, based on a random seed. When KASLR is disabled, this seed is set to 0x0, and this results in the lowest available region of memory to be selected for loading the kernel, even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is typically reserved for the GFP_DMA region, to accommodate masters that can only access the first 16 MiB of system memory. Even if such devices are rare these days, we may still end up with a warning in the kernel log, as reported by Tom: swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 Fix this by tweaking the random allocation logic to accept a low bound on the placement, and set it to LOAD_PHYSICAL_ADDR. Fixes: a1b87d5 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Reported-by: Tom Englund <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404 Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 46eba19 ] Commit 56e58d6 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. Fixes: 56e58d6 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f510bcc ] When doing a channel switch, cfg80211_update_known_bss may be called with a BSS where both proberesp_ies and beacon_ies is set. If that happens, both need to be consumed. Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20231211085121.07a88656d7df.I0fe9fc599382de0eccf96455617e377d9c231966@changeid Signed-off-by: Johannes Berg <[email protected]> Stable-dep-of: 177fbbc ("wifi: cfg80211: detect stuck ECSA element in probe resp") Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 177fbbc ] We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f3 ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later. Reported-by: coldolt <[email protected]> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f3 ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240129131413.246972c8775e.Ibf834d7f52f9951a353b6872383da710a7358338@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 35e2385 ] As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that. Reported-by: coldolt <[email protected]> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f3 ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240129131413.cc2d0a26226e.I682c016af76e35b6c47007db50e8554c5a426910@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9480adf ] This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that. Fixes: 8cc0726 ("wifi: mac80211: handle TDLS data frames with MLO") Link: https://msgid.link/20240129155348.8a9c0b1e1d89.I553f96ce953bb41b0b877d592056164dec20d01c@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 178e9d6 ] There's a bug in ieee80211_set_unsol_bcast_probe_resp(), it tries to return BSS_CHANGED_UNSOL_BCAST_PROBE_RESP (which has the value 1<<31) in an int, which makes it negative and considered an error. Fix this by passing the changed flags to set separately. Fixes: 3b1c256 ("wifi: mac80211: fixes in FILS discovery updates") Reviewed-by: Jeff Johnson <[email protected]> Link: https://msgid.link/20240129195729.965b0740bf80.I6bc6f5236863f686c17d689be541b1dd2633c417@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a0b4f22 ] This should be waiting if we don't have a beacon yet, but somehow I managed to invert the logic. Fix that. Fixes: 74e1309 ("wifi: mac80211: mlme: look up beacon elems only if needed") Link: https://msgid.link/20240131164856.922701229546.I239b379e7cee04608e73c016b737a5245e5b23dd@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 16867c3 ] Currently the driver exits eSR by calling iwl_mvm_esr_mode_inactive() before updating the FW (by deactivating one of the links), and therefore before sending the EML frame notifying that we are no longer in eSR. This is wrong for several reasons: 1. The driver sends SMPS activation frames when we are still in eSR and SMPS should be disabled when in eSR 2. The driver restores RLC configuration as it was before eSR entering, and RLC command shouldn't be sent in eSR Fix this by calling iwl_mvm_esr_mode_inactive() after FW update Fixes: 12bacfc ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Reviewed-by: Gregory Greenman <[email protected]> Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5bdda00 ] After commit e3eac9f ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by"), the compiler may enforce dynamic array indexing of req->channels to stay below n_channels. As a result, n_channels needs to be increased _before_ accessing the newly added array index. Increment it first, then use "i" for the prior index. Solves this warning in the coming GCC that has __counted_by support: ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info': ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req-> n_channels' may be undefined [-Wsequence-point] 3783 | req->channels[req->n_channels++] = chan; | ~~~~~~~~~~~~~~~^~ Fixes: e3eac9f ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <[email protected]> Cc: Franky Lin <[email protected]> Cc: Hante Meuleman <[email protected]> Cc: Kalle Valo <[email protected]> Cc: Chi-hsien Lin <[email protected]> Cc: Ian Lin <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Wright Feng <[email protected]> Cc: Hector Martin <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

Commit 704ea88 upstream. Since our poll handling is edge triggered, multishot handlers retry internally until they know that no more data is available. In preparation for limiting these retries, add an internal return code, IOU_REQUEUE, which can be used to inform the poll backend about the handler wanting to retry, but that this should happen through a normal task_work requeue rather than keep hammering on the issue side for this one request. No functional changes in this patch, nobody is using this return code just yet. Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Commit 76b367a upstream. If we have multiple clients and some/all are flooding the receives to such an extent that we can retry a LOT handling multishot receives, then we can be starving some clients and hence serving traffic in an imbalanced fashion. Limit multishot retry attempts to some arbitrary value, whose only purpose serves to ensure that we don't keep serving a single connection for way too long. We default to 32 retries, which should be more than enough to provide fairness, yet not so small that we'll spend too much time requeuing rather than handling traffic. Cc: [email protected] Depends-on: 704ea88 ("io_uring/poll: add requeue return code from poll multishot handling") Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()") Depends-on: e84b01a ("io_uring/poll: move poll execution helpers higher up") Fixes: b3fdea6 ("io_uring: multishot recv") Fixes: 9bb6690 ("io_uring: support multishot in recvmsg") Link: axboe/liburing#1043 Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fe92f87 upstream. While inlining csum_and_memcpy() into memcpy_to_iter_csum(), the from address passed to csum_partial_copy_nocheck() was accidentally changed. This causes a regression in applications using UDP, as for example OpenAFS, causing loss of datagrams. Fixes: dc32bff ("iov_iter, net: Fold in csum_and_memcpy()") Cc: David Howells <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Michael Lass <[email protected]> Reviewed-by: Jeffrey Altman <[email protected]> Acked-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1692b97 upstream. The cited commit introduces and uses the string constants dpp_tx_err and dpp_rx_err. These are assigned to constant fields of the array dwxgmac3_error_desc. It has been reported that on GCC 6 and 7.5.0 this results in warnings such as: .../dwxgmac2_core.c:836:20: error: initialiser element is not constant { true, "TDPES0", dpp_tx_err }, I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0. But not GCC 13.2.0. So it seems this effects older compilers but not newer ones. As Jon points out in his report, the minimum compiler supported by the kernel is GCC 5.1, so it does seem that this ought to be fixed. It is not clear to me what combination of 'const', if any, would address this problem. So this patch takes of using #defines for the string constants Compile tested only. Fixes: 46eba19 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Reported-by: Jon Hunter <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 668abe6 upstream. The quirk table entries should be put in the USB ID order, but some entries have been put in random places. Re-sort them. Fixes: bf990c1 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue") Fixes: fd28941 ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless") Fixes: dfd5fe1 ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless") Fixes: 4a63e68 ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.") Fixes: 7822baa ("ALSA: usb-audio: add quirk for RODE NT-USB+") Fixes: 4fb7c24 ("ALSA: usb-audio: Add quirk for Fiero SC-01") Fixes: 2307a0e ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1ce2654 upstream. DDPP is copied from Synopsys Data book: DDPP: Disable Data path Parity Protection. When it is 0x0, Data path Parity Protection is enabled. When it is 0x1, Data path Parity Protection is disabled. The macro name should be XGMAC_DPP_DISABLE. Fixes: 46eba19 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Signed-off-by: Furong Xu <[email protected]> Reviewed-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 60c0c23 upstream. rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active. Fixes: f718863 ("netfilter: nft_set_rbtree: fix overlap expiration walk") Cc: [email protected] Reported-by: lonial con <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Link: https://lore.kernel.org/r/[email protected] Tested-by: Ronald Warsow <[email protected]> Tested-by: Luna Jernberg <[email protected]> Tested-by: SeongJae Park <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Ricardo B. Marliere <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Luna Jernberg <[email protected]> Tested-by: Ronald Warsow <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Justin M. Forbes <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

This is the 6.7.5 stable release

Signed-off-by: David Vernet <[email protected]>

…SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: b1fc44e, fixes the path where memory is pre-mapped (direct mapped) to the DDW. When TCEs are direct mapped, there is no need to initialize IOMMU tables. iommu_table_setparms_lpar() only considers "ibm,dma-window" property when initiallizing IOMMU table. In the scenario where TCEs are dynamically allocated for SR-IOV, newly created IOMMU table is not initialized. Later, when the device driver tries to enter TCEs for the SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc(). The fix is to initialize the IOMMU table with DDW property stored in the FDT. There are 2 points to remember: 1. For the dedicated adapter, kdump kernel would encounter both default and DDW in FDT. In this case, DDW property is used to initialize the IOMMU table. 2. A DDW could be direct or dynamic mapped. kdump kernel would initialize IOMMU table and mark the existing DDW as "dynamic". This works fine since, at the time of table initialization, iommu_table_clear() makes some space in the DDW, for some predefined number of TCEs which are needed for kdump to succeed. Fixes: b1fc44e ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra <[email protected]> Reviewed-by: Brian King <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]

…-maps' Eduard Zingerman says: ==================== libbpf: type suffixes and autocreate flag for struct_ops maps Tweak struct_ops related APIs to allow the following features: - specify version suffixes for stuct_ops map types; - share same BPF program between several map definitions with different local BTF types, assuming only maps with same kernel BTF type would be selected for load; - toggle autocreate flag for struct_ops maps; - automatically toggle autoload for struct_ops programs referenced from struct_ops maps, depending on autocreate status of the corresponding map; - use SEC("?.struct_ops") and SEC("?.struct_ops.link") to define struct_ops maps with autocreate == false after object open. This would allow loading programs like below: SEC("struct_ops/foo") int BPF_PROG(foo) { ... } SEC("struct_ops/bar") int BPF_PROG(bar) { ... } struct bpf_testmod_ops___v1 { int (*foo)(void); }; struct bpf_testmod_ops___v2 { int (*foo)(void); int (*bar)(void); }; /* Assume kernel type name to be 'test_ops' */ SEC(".struct_ops.link") struct test_ops___v1 map_v1 = { /* Program 'foo' shared by maps with * different local BTF type */ .foo = (void *)foo }; SEC(".struct_ops.link") struct test_ops___v2 map_v2 = { .foo = (void *)foo, .bar = (void *)bar }; Assuming the following tweaks are done before loading: /* to load v1 */ bpf_map__set_autocreate(skel->maps.map_v1, true); bpf_map__set_autocreate(skel->maps.map_v2, false); /* to load v2 */ bpf_map__set_autocreate(skel->maps.map_v1, false); bpf_map__set_autocreate(skel->maps.map_v2, true); Patch #8 ties autocreate and autoload flags for struct_ops maps and programs. Changelog: - v3 [3] -> v4: - changes for multiple styling suggestions from Andrii; - patch #5: libbpf log capture now happens for LIBBPF_INFO and LIBBPF_WARN messages and does not depend on verbosity flags (Andrii); - patch #6: fixed runtime crash caused by conflict with newly added test case struct_ops_multi_pages; - patch #7: fixed free of possibly uninitialized pointer (Daniel) - patch #8: simpler algorithm to detect which programs to autoload (Andrii); - patch #9: added assertions for autoload flag after object load (Andrii); - patch #12: DATASEC name rewrite in libbpf is now done inplace, no new strings added to BTF (Andrii); - patch #14: allow any printable characters in DATASEC names when kernel validates BTF (Andrii) - v2 [2] -> v3: - moved patch #8 logic to be fully done on load (requested by Andrii in offlist discussion); - in patch #9 added test case for shadow vars and autocreate/autoload interaction. - v1 [1] -> v2: - fixed memory leak in patch #1 (Kui-Feng); - improved error messages in patch #2 (Martin, Andrii); - in bad_struct_ops selftest from patch #6 added .test_2 map member setup (David); - added utility functions to capture libbpf log from selftests (David) - in selftests replaced usage of ...__open_and_load by separate calls to ..._open() and ..._load() (Andrii); - removed serial_... in selftest definitions (Andrii); - improved comments in selftest struct_ops_autocreate from patch #7 (David); - removed autoload toggling logic incompatible with shadow variables from bpf_map__set_autocreate(), instead struct_ops programs autoload property is computed at struct_ops maps load phase, see patch #8 (Kui-Feng, Martin, Andrii); - added support for SEC("?.struct_ops") and SEC("?.struct_ops.link") (Andrii). [1] https://lore.kernel.org/bpf/[email protected]/ [2] https://lore.kernel.org/bpf/[email protected]/ [3] https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Andrii Nakryiko <[email protected]>

Petr Machata says: ==================== selftests: Fixes for kernel CI As discussed on the bi-weekly call on Jan 30, and in mailing around kernel CI effort, some changes are desirable in the suite of forwarding selftests the better to work with the CI tooling. Namely: - The forwarding selftests use a configuration file where names of interfaces are defined and various variables can be overridden. There is also forwarding.config.sample that users can use as a template to refer to when creating the config file. What happens a fair bit is that users either do not know about this at all, or simply forget, and are confused by cryptic failures about interfaces that cannot be created. In patches #1 - #3 have lib.sh just be the single source of truth with regards to which variables exist. That includes the topology variables which were previously only in the sample file, and any "tweak variables", such as what tools to use, sleep times, etc. forwarding.config.sample then becomes just a placeholder with a couple examples. Unless specific HW should be exercised, or specific tools used, the defaults are usually just fine. - Several net/forwarding/ selftests (and one net/ one) cannot be run on veth pairs, they need an actual HW interface to run on. They are generic in the sense that any capable HW should pass them, which is why they have been put to net/forwarding/ as opposed to drivers/net/, but they do not generalize to veth. The fact that these tests are in net/forwarding/, but still complaining when run, is confusing. In patches #4 - #6 move these tests to a new directory drivers/net/hw. - The following patches extend the codebase to handle well test results other than pass and fail. Patch #7 is preparatory. It converts several log_test_skip to XFAIL, so that tests do not spuriously end up returning non-0 when they are not supposed to. In patches #8 - #10, introduce some missing ksft constants, then support having those constants in RET, and then finally in EXIT_STATUS. - The traffic scheduler tests generate a large amount of network traffic to test the behavior of the scheduler. This demands a relatively high-performance computer. On slow machines, such as with a debugging kernel, the test would spuriously fail. It can still be useful to "go through the motions" though, to possibly catch bugs in setup of the scheduler graph and passing packets around. Thus we still want to run the tests, just with lowered demands. To that end, in patches #11 - #12, introduce an environment variable KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow, is provided to mark performance-sensitive parts of the selftest. - In patch #13, use a similar mechanism to mark a NH group stats selftest to XFAIL HW stats tests when run on VETH pairs. - All these changes complicate the hitherto straightforward logging and checking logic, so in patch #14, add a selftest that checks this functionality in lib.sh. v1 (vs. an RFC circulated through linux-kselftest): - Patch #9: - Clarify intended usage by s/set_ret/ret_set_ksft_status/, s/nret/ksft_status/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Commit 1548036 ("nfs: make the rpc_stat per net namespace") added functionality to specify rpc_stats function but missed adding it to the TCP TLS functionality. As the result, mounting with xprtsec=tls lead to the following kernel oops. [ 128.984192] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001c [ 128.985058] Mem abort info: [ 128.985372] ESR = 0x0000000096000004 [ 128.985709] EC = 0x25: DABT (current EL), IL = 32 bits [ 128.986176] SET = 0, FnV = 0 [ 128.986521] EA = 0, S1PTW = 0 [ 128.986804] FSC = 0x04: level 0 translation fault [ 128.987229] Data abort info: [ 128.987597] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 128.988169] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 128.988811] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 128.989302] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000106c84000 [ 128.990048] [000000000000001c] pgd=0000000000000000, p4d=0000000000000000 [ 128.990736] Internal error: Oops: 0000000096000004 [#1] SMP [ 128.991168] Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace netfs uinput dm_mod nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink qrtr vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common mc vmw_vmci xfs libcrc32c e1000e crct10dif_ce ghash_ce sha2_ce vmwgfx nvme sha256_arm64 nvme_core sr_mod cdrom sha1_ce drm_ttm_helper ttm drm_kms_helper drm sg fuse [ 128.996466] CPU: 0 PID: 179 Comm: kworker/u4:26 Kdump: loaded Not tainted 6.8.0-rc6+ #12 [ 128.997226] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 128.998084] Workqueue: xprtiod xs_tcp_tls_setup_socket [sunrpc] [ 128.998701] pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 128.999384] pc : call_start+0x74/0x138 [sunrpc] [ 128.999809] lr : __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.000244] sp : ffff8000832b3a00 [ 129.000508] x29: ffff8000832b3a00 x28: ffff800081ac79c0 x27: ffff800081ac7000 [ 129.001111] x26: 0000000004248060 x25: 0000000000000000 x24: ffff800081596008 [ 129.001757] x23: ffff80007b087240 x22: ffff00009a509d30 x21: 0000000000000000 [ 129.002345] x20: ffff000090075600 x19: ffff00009a509d00 x18: ffffffffffffffff [ 129.002912] x17: 733d4d4554535953 x16: 42555300312d746e x15: ffff8000832b3a88 [ 129.003464] x14: ffffffffffffffff x13: ffff8000832b3a7d x12: 0000000000000008 [ 129.004021] x11: 0101010101010101 x10: ffff8000150cb560 x9 : ffff80007b087c00 [ 129.004577] x8 : ffff00009a509de0 x7 : 0000000000000000 x6 : 00000000be8c4ee3 [ 129.005026] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff000094d56680 [ 129.005425] x2 : ffff80007b0637f8 x1 : ffff000090075600 x0 : ffff00009a509d00 [ 129.005824] Call trace: [ 129.005967] call_start+0x74/0x138 [sunrpc] [ 129.006233] __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.006506] rpc_execute+0x160/0x1d8 [sunrpc] [ 129.006778] rpc_run_task+0x148/0x1f8 [sunrpc] [ 129.007204] tls_probe+0x80/0xd0 [sunrpc] [ 129.007460] rpc_ping+0x28/0x80 [sunrpc] [ 129.007715] rpc_create_xprt+0x134/0x1a0 [sunrpc] [ 129.007999] rpc_create+0x128/0x2a0 [sunrpc] [ 129.008264] xs_tcp_tls_setup_socket+0xdc/0x508 [sunrpc] [ 129.008583] process_one_work+0x174/0x3c8 [ 129.008813] worker_thread+0x2c8/0x3e0 [ 129.009033] kthread+0x100/0x110 [ 129.009225] ret_from_fork+0x10/0x20 [ 129.009432] Code: f0ffffc2 911fe042 aa1403e1 aa1303e0 (b9401c83) Fixes: 1548036 ("nfs: make the rpc_stat per net namespace") Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>

syzkaller reported a warning [0] triggered while destroying immature netns. rpc_proc_register() was called in init_nfs_fs(), but its error has been ignored since at least the initial commit 1da177e ("Linux-2.6.12-rc2"). Recently, commit d47151b ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") converted the procfs to per-netns and made the problem more visible. Even when rpc_proc_register() fails, nfs_net_init() could succeed, and thus nfs_net_exit() will be called while destroying the netns. Then, remove_proc_entry() will be called for non-existing proc directory and trigger the warning below. Let's handle the error of rpc_proc_register() properly in nfs_net_init(). [0]: name 'nfs' WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Modules linked in: CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8 FS: 00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170 setup_net+0x46c/0x660 net/core/net_namespace.c:372 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228 ksys_unshare+0x342/0x760 kernel/fork.c:3322 __do_sys_unshare kernel/fork.c:3393 [inline] __se_sys_unshare kernel/fork.c:3391 [inline] __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f30d0febe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000 </TASK> Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>

With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To thwart invalid memory accesses, the JITs add an exception table entry for all such accesses. But in case the src_reg + offset is a userspace address, the BPF program might read that memory if the user has mapped it. Make the verifier add guard instructions around such memory accesses and skip the load if the address falls into the userspace region. The JITs need to implement bpf_arch_uaddress_limit() to define where the userspace addresses end for that architecture or TASK_SIZE is taken as default. The implementation is as follows: REG_AX = SRC_REG if(offset) REG_AX += offset; REG_AX >>= 32; if (REG_AX <= (uaddress_limit >> 32)) DST_REG = 0; else DST_REG = *(size *)(SRC_REG + offset); Comparing just the upper 32 bits of the load address with the upper 32 bits of uaddress_limit implies that the values are being aligned down to a 4GB boundary before comparison. The above means that all loads with address <= uaddress_limit + 4GB are skipped. This is acceptable because there is a large hole (much larger than 4GB) between userspace and kernel space memory, therefore a correctly functioning BPF program should not access this 4GB memory above the userspace. Let's analyze what this patch does to the following fentry program dereferencing an untrusted pointer: SEC("fentry/tcp_v4_connect") int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk) { *(volatile long *)sk; return 0; } BPF Program before | BPF Program after ------------------ | ----------------- 0: (79) r1 = *(u64 *)(r1 +0) 0: (79) r1 = *(u64 *)(r1 +0) ----------------------------------------------------------------------- 1: (79) r1 = *(u64 *)(r1 +0) --\ 1: (bf) r11 = r1 ----------------------------\ \ 2: (77) r11 >>= 32 2: (b7) r0 = 0 \ \ 3: (b5) if r11 <= 0x8000 goto pc+2 3: (95) exit \ \-> 4: (79) r1 = *(u64 *)(r1 +0) \ 5: (05) goto pc+1 \ 6: (b7) r1 = 0 \-------------------------------------- 7: (b7) r0 = 0 8: (95) exit As you can see from above, in the best case (off=0), 5 extra instructions are emitted. Now, we analyze the same program after it has gone through the JITs of ARM64 and RISC-V architectures. We follow the single load instruction that has the untrusted pointer and see what instrumentation has been added around it. x86-64 JIT ========== JIT's Instrumentation (upstream) --------------------- 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 7: push %rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rdi --------------------------------- f: movabs $0x800000000000,%r11 19: cmp %r11,%rdi 1c: jb 0x000000000000002a 1e: mov %rdi,%r11 21: add $0x0,%r11 28: jae 0x000000000000002e 2a: xor %edi,%edi 2c: jmp 0x0000000000000032 2e: mov 0x0(%rdi),%rdi --------------------------------- 32: xor %eax,%eax 34: leave 35: ret The x86-64 JIT already emits some instructions to protect against user memory access. This patch doesn't make any changes for the x86-64 JIT. ARM64 JIT ========= No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: add x9, x30, #0x0 0: add x9, x30, #0x0 4: nop 4: nop 8: paciasp 8: paciasp c: stp x29, x30, [sp, #-16]! c: stp x29, x30, [sp, #-16]! 10: mov x29, sp 10: mov x29, sp 14: stp x19, x20, [sp, #-16]! 14: stp x19, x20, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 24: mov x25, sp 24: mov x25, sp 28: mov x26, #0x0 28: mov x26, #0x0 2c: sub x27, x25, #0x0 2c: sub x27, x25, #0x0 30: sub sp, sp, #0x0 30: sub sp, sp, #0x0 34: ldr x0, [x0] 34: ldr x0, [x0] -------------------------------------------------------------------------------- 38: ldr x0, [x0] ----------\ 38: add x9, x0, #0x0 -----------------------------------\\ 3c: lsr x9, x9, #32 3c: mov x7, #0x0 \\ 40: cmp x9, #0x10, lsl #12 40: mov sp, sp \\ 44: b.ls 0x0000000000000050 44: ldp x27, x28, [sp], #16 \\--> 48: ldr x0, [x0] 48: ldp x25, x26, [sp], #16 \ 4c: b 0x0000000000000054 4c: ldp x21, x22, [sp], #16 \ 50: mov x0, #0x0 50: ldp x19, x20, [sp], #16 \--------------------------------------- 54: ldp x29, x30, [sp], #16 54: mov x7, #0x0 58: add x0, x7, #0x0 58: mov sp, sp 5c: autiasp 5c: ldp x27, x28, [sp], #16 60: ret 60: ldp x25, x26, [sp], #16 64: nop 64: ldp x21, x22, [sp], #16 68: ldr x10, 0x0000000000000070 68: ldp x19, x20, [sp], #16 6c: br x10 6c: ldp x29, x30, [sp], #16 70: add x0, x7, #0x0 74: autiasp 78: ret 7c: nop 80: ldr x10, 0x0000000000000088 84: br x10 There are 6 extra instructions added in ARM64 in the best case. This will become 7 in the worst case (off != 0). RISC-V JIT (RISCV_ISA_C Disabled) ========== No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: nop 0: nop 4: nop 4: nop 8: li a6, 33 8: li a6, 33 c: addi sp, sp, -16 c: addi sp, sp, -16 10: sd s0, 8(sp) 10: sd s0, 8(sp) 14: addi s0, sp, 16 14: addi s0, sp, 16 18: ld a0, 0(a0) 18: ld a0, 0(a0) --------------------------------------------------------------- 1c: ld a0, 0(a0) --\ 1c: mv t0, a0 --------------------------\ \ 20: srli t0, t0, 32 20: li a5, 0 \ \ 24: lui t1, 4096 24: ld s0, 8(sp) \ \ 28: sext.w t1, t1 28: addi sp, sp, 16 \ \ 2c: bgeu t1, t0, 12 2c: sext.w a0, a5 \ \--> 30: ld a0, 0(a0) 30: ret \ 34: j 8 \ 38: li a0, 0 \------------------------------ 3c: li a5, 0 40: ld s0, 8(sp) 44: addi sp, sp, 16 48: sext.w a0, a5 4c: ret There are 7 extra instructions added in RISC-V. Fixes: 8008342 ("bpf, arm64: Add BPF exception tables") Reported-by: Breno Leitao <[email protected]> Suggested-by: Alexei Starovoitov <[email protected]> Acked-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Puranjay Mohan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 97e1db0 ] Once unix_sk(sk)->addr is assigned under net->unx.table.locks and unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are fully set up, and unix_sk(sk)->addr is never changed. unix_getname() and unix_copy_addr() access the two fields locklessly, and commit ae3b564 ("missing barriers in some of unix_sock ->addr and ->path accesses") added smp_store_release() and smp_load_acquire() pairs. In other functions, we still read unix_sk(sk)->addr locklessly to check if the socket is bound, and KCSAN complains about it. [0] Given these functions have no dependency for *(unix_sk(sk)->addr) and unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race. Note that it is safe to access unix_sk(sk)->addr locklessly if the socket is found in the hash table. For example, the lockless read of otheru->addr in unix_stream_connect() is safe. Note also that newu->addr there is of the child socket that is still not accessible from userspace, and smp_store_release() publishes the address in case the socket is accept()ed and unix_getname() / unix_copy_addr() is called. [0]: BUG: KCSAN: data-race in unix_bind / unix_listen write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0: __unix_set_addr_hash net/unix/af_unix.c:329 [inline] unix_bind_bsd net/unix/af_unix.c:1241 [inline] unix_bind+0x881/0x1000 net/unix/af_unix.c:1319 __sys_bind+0x194/0x1e0 net/socket.c:1847 __do_sys_bind net/socket.c:1858 [inline] __se_sys_bind net/socket.c:1856 [inline] __x64_sys_bind+0x40/0x50 net/socket.c:1856 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1: unix_listen+0x72/0x180 net/unix/af_unix.c:734 __sys_listen+0xdc/0x160 net/socket.c:1881 __do_sys_listen net/socket.c:1890 [inline] __se_sys_listen net/socket.c:1888 [inline] __x64_sys_listen+0x2e/0x40 net/socket.c:1888 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e value changed: 0x0000000000000000 -> 0xffff88807b5b1b40 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 51d1b25 ] syzkaller reported data-race of sk->sk_hash in unix_autobind() [0], and the same ones exist in unix_bind_bsd() and unix_bind_abstract(). The three bind() functions prefetch sk->sk_hash locklessly and use it later after validating that unix_sk(sk)->addr is NULL under unix_sk(sk)->bindlock. The prefetched sk->sk_hash is the hash value of unbound socket set in unix_create1() and does not change until bind() completes. There could be a chance that sk->sk_hash changes after the lockless read. However, in such a case, non-NULL unix_sk(sk)->addr is visible under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using the prefetched value. The KCSAN splat is false-positive, but let's silence it by reading sk->sk_hash under unix_sk(sk)->bindlock. [0]: BUG: KCSAN: data-race in unix_autobind / unix_autobind write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0: __unix_set_addr_hash net/unix/af_unix.c:331 [inline] unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1: unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373 __sys_connect_file+0xd7/0xe0 net/socket.c:2048 __sys_connect+0x114/0x140 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x40/0x50 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e value changed: 0x000000e4 -> 0x000001e3 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: afd20b9 ("af_unix: Replace the big lock with small locks.") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…PLES event" commit 5b3cde1 upstream. This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261 ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

LiBaokun96 and others added 30 commits February 16, 2024 19:14

axboe and others added 10 commits February 16, 2024 19:14

Merge tag 'v6.7.5' into merge_latest

0de69ee

This is the 6.7.5 stable release

v6.7.5-scx1

8434f90

Signed-off-by: David Vernet <[email protected]>

Byte-Lab requested a review from htejun February 17, 2024 05:27

htejun closed this Feb 17, 2024

htejun reopened this Feb 17, 2024

htejun merged commit 01d80ca into scx-6.7.y Feb 17, 2024
2 checks passed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

v6.7.5-scx1 #12

v6.7.5-scx1 #12

Byte-Lab commented Feb 17, 2024

v6.7.5-scx1 #12

v6.7.5-scx1 #12

Conversation

Byte-Lab commented Feb 17, 2024