v2.2.0

What's Changed

• When a device moves from one WiFi interface to another (for example if there's one SSID with both 2.4 and 5 Ghz radio's), it will now stay "home" instead of causing a disconnect/reconnect. As long as the device is connected on any interface, it will not be reported as "away".
• Added a source_type setting (default: router), that configures what is sent to home assistant as the source device. This can be set to "gps" to allow for different zone names besides "home" and "not_home" to work. Beware that the priority of gps sources is lower than that of router sources, so it might affect the "at home" logic of your automations.

PR's:

• feat: make source_type configurable by @rmoesbergen in #49
• feat: properly deal with roaming devices over multiple interfaces by @rmoesbergen in #48

Full Changelog: v2.1.1...v2.2.0

v2.1.1

What's Changed

• Sync the version sensor state after HA connection loss was detected and it comes back online by @rmoesbergen in #43
• Add "sensor." prefix to the name of the version sensor to match home assistant naming standards

Full Changelog: v2.1.0...v2.1.1

v2.1.0

What's Changed

• Add a fallback_sync_interval setting, as a workaround for devices that don't generate a 'disassociate' hostapd event by @rmoesbergen in #36.
• Create a presense detector version entity on startup by @rmoesbergen in #38
• Add HA integration info to README.md by @L-Warlok in #30
• Make sure the version entity name is valid by @dckiller51 in #39

New Contributors

• @L-Warlok made their first contribution in #30
• @dckiller51 made their first contribution in #39

Full Changelog: v2.0.1...v2.1.0

v2.0.1

What's Changed

• MAC addresses are now always lowercased everywhere, so matching is always case-insensitive. @rmoesbergen in #28
• Updated the example configuration with new (post 2.0.0) settings

Full Changelog: v2.0.0...v2.0.1

v2.0.0

What's Changed

New Features

• Reworked how device events are stored and sent to HA to be thread-safe. This resolved a lot of subtle issues with device calls being done twice, devices staying online when they timed out from the WiFi network, etc. It should be lot more reliable overall.
• It is now possible to have a denylist or an allowlist to filter which devices should be tracked. The do_not_track track option has been renamed to filter, and a new setting called filter_is_denylist has been introduced. The default is true, so filter is a denylist which is compatible with what do_not_track did.

Breaking changes

• The do_not_track was removed in favor of the filter and filter_is_denylist settings. You can rename do_not_track to filter to keep the current behavior. See the example in the README for more details.
• Due to the multi-threading changes and the queue mechanism, the offline_after, poll_interval and full_sync_polls settings have been removed. You can safely delete them from your configuration file.

Full Changelog: v1.2.3...v2.0.0

v1.2.3

• Fix a bug with recovering from failure when the ap_name setting was used
• Fix a crash when calls to home assistant timed out

Full Changelog: v1.2.2...v1.2.3

v1.2.2

What's Changed

• fix: catch TimeoutError when calling HA (fixes #19) by @rmoesbergen in #20

Full Changelog: v1.2.1...v1.2.2

v1.2.1

What's Changed

• Fix support for older python versions @rmoesbergen in #18

Full Changelog: v1.2.0...v1.2.1

v1.2.0

What's Changed

• BREAKING : Renamed the default filename for settings.json to presence-detector.settings.json by @Otamay in #15. Please rename your settings.json file to presence-detector.settings.json, or specify it with the -c / --config command line argument.
• Removed dependancy on python-requests library, reducing the required base-system (python) footprint and allowing the script to run on smaller devices by @Otamay in #15. Now only python3-light, python3-urllib and python3-idna are needed to run the script.
• Fix a bug in stop(), causing an exception when a signal was sent to the detector process by @Otamay in #15
• Update README.md with new settings filename and some cleanups by @rmoesbergen in #16

New Contributors

• @Otamay made their first contribution in #15

Full Changelog: v1.1.5...v1.2.0

v1.1.5

What's Changed

• fix: fix a concurrency issue where 2 threads were updating the list of clients, by @rmoesbergen in #14

Full Changelog: v1.1.4...v1.1.5