Add Kali basics to references

navigation.md

@@ -18,14 +18,15 @@
   * [Forensics](forensics/index.md)
   * [Reporting Tools](reporting/index.md)
   * [System Services](systemservices/index.md)
-  
+
 [Tools]()
+
   * [Tools](tools/index.md)
 
 [References]()
 
-  * [temp](references/temp.md)
- 
+  * [Basics](references/index.md)
+
 [Links](links.md)
 
 [gimmick:themechooser](Wiki Theme)

references/index.md

@@ -0,0 +1,52 @@
+## Kali basic
+
+#### Change region to increase Tx power:
+- check region: `iw reg get`
+- set region `iw reg set BO`
+
+### Init
+
+- enable monitor mode: `airmon-ng start wlan0`
+
+#### Up interface and connect to Network:
+
+- Show devices:  `iw dev`
+- Check device status: `ip link show wlan0`
+- Enable a network interface:  `ifconfig wlan0 up` or `ip link set wlan0 up`
+- Check the connection status – WiFi network from command line `iw wlan0 link`
+
+
+>Based on [http://www.blackmoreops.com/2014/09/18/connect-to-wifi-network-from-command-line-in-linux/](http://www.blackmoreops.com/2014/09/18/connect-to-wifi-network-from-command-line-in-linux/)
+
+- Set IP address: `ifconfig wlan0 192.168.0.77` or `ip address add 192.168.0.77 dev wlan0`
+
+
+### Scan:
+
+- Show all networks around `iw waln0 scan` or `iwlist wlan0 scan`
+    - grep most useful info from there: `iw wlan0 scan | grep -E '(SSID|^BSS|WPS|WEP|WPA|RSN)|signal'`
+- Show networks with open WPS: `wash -i mon0`
+
+- Show hidden ESSID:
+    1. Scan channel n: `airodump-ng -c n  mon0`
+    2. Make a deauth attack: `aireplay-ng -0 2 -a $SSID mon0`
+
+
+### WPS attack:
+- Reaver attack: `reaver -i mon0 -b $SSID -vv -d 5 -N -S -E`
+
+- Sniff-detecting: `nmap --script=sniffer-detect 192.168.x.0/24`
+
+### Resolve errors: 
+
+- Durring `ifconfig wlan0 up` appears error 'RTNETLINK answers: Operation not possible due to RF-kill'
+    >http://www.geekmind.net/2011/01/linux-wifi-operation-not-possible-due.html
+
+        rfkill list all 
+
+> if "Soft blocked: yes" -> then
+
+```
+      rfkill unblock wifi
+      rfkill list all
+```