Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fix/revert ipv4 mapped ipv6 stuff 10.1 v2 #30

Open
wants to merge 513 commits into
base: stable/10.1
Choose a base branch
from
Open

Fix/revert ipv4 mapped ipv6 stuff 10.1 v2 #30

wants to merge 513 commits into from

Conversation

rzalamena
Copy link
Member

No description provided.

c-po and others added 30 commits July 17, 2024 10:31
@c-po
ospfd: fix internal ldp-sync state flags when feature is disabled
5a70378 
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!

FRRouting/frr#16375

Signed-off-by: Christian Breunig <[email protected]>
@anlancs
doc: adjust some commands for pim/pimv6 bsr
55be38d 
Signed-off-by: anlan_cs <[email protected]>
@pguibert6WIND
zebra: add nexthop counter to 'show zebra dplane' command
e36e570 
The nexthop updates counter value was never displayed.
Add it.

> # show zebra dplane
> Zebra dataplane:
> Route updates:            7673010
> Route update errors:      0
> Nexthop updates:          1100
> Nexthop update errors:    0
> [..]

Signed-off-by: Philippe Guibert <[email protected]>
@y-bharath14
yang: Fixed pyang warnings at frr-bfdd yang file
329a419 
Fixed warnings at frr-bfdd yang file

Signed-off-by: y-bharath14 <[email protected]>
bgpd: fix label lost when vrf loopback comes back
8b81f32 
VRF-label association drops when the VRF loopback goes down, however, it
does not return once the interface is enabled again.

Logs show that when VRF loopback goes down, a label drop message is sent
to zebra and immediately resent label installation to zebra, trigged by
"vpn_leak_postchange_all()":
2024/07/16 13:26:29 BGP: [RVJ1J-J2T22] ifp down r1-cust1 vrf id 7
2024/07/16 13:26:29 BGP: [WA2QY-06STJ] vpn_leak_zebra_vrf_label_withdraw: deleting label for vrf VRF r1-cust1 (id=7)
2024/07/16 13:26:30 BGP: [S82AC-6YAC8] vpn_leak_zebra_vrf_label_update: vrf VRF r1-cust1: afi IPv4: setting label 80 for vrf id 7

Since the interface is down, the netlink message is not send to kernel.
Once the interface comes back, zebra ignore the installation assuming
the label is already seen.

To fix this, add a check for the interface status before attempting to
reinstall the label.

Signed-off-by: Loïc Sang <[email protected]>
bgpd: do not update leak label at loopback up down
c21c597 
The up/down state of the lo loopback interface does not determine the
availability of the default vrf-lite.

Do not update leak label at lo loopback up/down change.

Fixes: b45c5cd ("bgpd: update route leak when vrf state changes")
Signed-off-by: Louis Scalbert <[email protected]>
Signed-off-by: Loïc Sang <[email protected]>
@eqvinox
Merge pull request #16411 from anlancs/fix/doc-bsr
3a567e8
@nabahr
tests: OSPFv3 hello tests investigation, make assert output unique
ddc1c2e 
These failing tests are hard to track down. Added numbering to each assert
to easily tell where the test fails.

Signed-off-by: Nathan Bahr <[email protected]>
@dleroy
nhrpd: Fixes auth config change bug
55de91d 
Freeing auth-token does not set nifp->auth_token to NULL.
Explicitly set auth_token to NULL when deleting auth config in order
for write config logic to succeed.

Fix bug #16359

Signed-off-by: Dave LeRoy <[email protected]>
@riw777
Merge pull request #16269 from nabahr/router_pim_config
8dae5cf 
Router pim config
@Jafaral
Merge pull request #16417 from LabNConsulting/dleroy/nhrpd-noauth-fix
272077d 
nhrpd: Fixes auth config change bug
@dleroy
nhrpd: Fixes auth no redirect bug
c531584 
The nhrp_peer_forward() routine was not explicitly handling the
Authentication Extension in the switch statement and instead fell
through to the default case which checked whether this was an
unhandled Compulsory extension and errored out, never forwarding
the Resolution Request.

Fix bug #16371

Signed-off-by: Dave LeRoy <[email protected]>
@riw777
Merge pull request #16415 from nabahr/ospfv3_hello_tests
f0ae1e8 
tests: OSPFv3 hello tests investigation, make assert output unique
@ton31337
Merge pull request #16409 from louis-6wind/statedir
3929f84 
build: display local state dir configuration
@ton31337
bgpd: Show extended parameters support for the OPEN messages
e8169f9 
We did that for the receiving side, but not for a sending side, let's fix it.

Signed-off-by: Donatas Abraitis <[email protected]>
@raja-rajasekar
bgpd: backpressure - fix ret value evpn_route_select_install
c4bbb5b 
The return value of evpn_route_select_install is ignored in all cases
except during vni route table install/uninstall and based on the
returned value, an error is logged. Fixing this.

Ticket :#3992392

Signed-off-by: Rajasekar Raja <[email protected]>
@raja-rajasekar
bgpd: backpressure - log error for evpn when route install to zebra f…
6cf5b79 
…ails.

log error for evpn in case route install to zebra fails.

Ticket :#3992392

Signed-off-by: Rajasekar Raja <[email protected]>
@y-bharath14
yang: Corrected range in yang file
8e5e19b 
Corrected range in yang file

Signed-off-by: y-bharath14 <[email protected]>
@Jafaral
Merge pull request #16422 from LabNConsulting/dleroy/nhrpd-auth-redir…
0b138e9 
…ect-fix

nhrpd: Fixes auth no redirect bug
@Jafaral
Merge pull request #16406 from opensourcerouting/fix/remove_deprecati…
7aeb51e 
…on_for_show_threads

Drop deprecation for `show thread ...`
@Jafaral
Merge pull request #16423 from opensourcerouting/fix/show_if_the_open…
9de961d 
…_message_is_extended

bgpd: Show extended parameters support for the OPEN messages
@ton31337
tools: Do not append an empty list (pim_vrfs) to the config lines
d022a40 
If pim_vrfs is empty, we append [] into the lines array, and the reload is broken
since it expects only strings, but gets an array inside at the end.

```
Traceback (most recent call last):
  File "/usr/lib/frr/frr-reload.py", line 2227, in <module>
    log.debug("New Frr Config\n%s", newconf.get_lines())
  File "/usr/lib/frr/frr-reload.py", line 436, in get_lines
    return "\n".join(self.lines)
TypeError: sequence item 45: expected str instance, list found
```

Fixes: 98d47f4 ("tools: Fix frr-reload to support legacy pim configuration from file")

Signed-off-by: Donatas Abraitis <[email protected]>
@ton31337
tools: Apply black formatting for the recent frr-reload.py changes
01b7bd3 
Signed-off-by: Donatas Abraitis <[email protected]>
@ton31337
Merge pull request #16392 from y-bharath14/srib-yang-a
eb30bd3 
yang: Corrected range in yang file
@ton31337
Merge pull request #16412 from y-bharath14/srib-yang-b
2332473 
yang: Fixed pyang warnings at frr-bfdd yang file
@cscarpitta
tests: Fix warnings in bgp_srv6l3vpn_to_bgp_vrf
44ee7a4 
When performing the `bgp_srv6l3vpn_to_bgp_vrf` topotest, the following
warnings are observed:

```
2024-07-21 08:01:51,390 WARNING: r1: Router(r1): proc failed: rc 127 pid 52974
	args: /usr/bin/nsenter --mount=/proc/52322/ns/mnt --net=/proc/52322/ns/net --uts=/proc/52322/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/r1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/r1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,522 WARNING: r2: Router(r2): proc failed: rc 127 pid 52984
	args: /usr/bin/nsenter --mount=/proc/52397/ns/mnt --net=/proc/52397/ns/net --uts=/proc/52397/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/r2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/r2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,632 WARNING: ce1: Router(ce1): proc failed: rc 127 pid 52994
	args: /usr/bin/nsenter --mount=/proc/52472/ns/mnt --net=/proc/52472/ns/net --uts=/proc/52472/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,757 WARNING: ce2: Router(ce2): proc failed: rc 127 pid 53004
	args: /usr/bin/nsenter --mount=/proc/52547/ns/mnt --net=/proc/52547/ns/net --uts=/proc/52547/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,878 WARNING: ce3: Router(ce3): proc failed: rc 127 pid 53014
	args: /usr/bin/nsenter --mount=/proc/52622/ns/mnt --net=/proc/52622/ns/net --uts=/proc/52622/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce3/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce3/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,997 WARNING: ce4: Router(ce4): proc failed: rc 127 pid 53024
	args: /usr/bin/nsenter --mount=/proc/52697/ns/mnt --net=/proc/52697/ns/net --uts=/proc/52697/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce4/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce4/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,109 WARNING: ce5: Router(ce5): proc failed: rc 127 pid 53034
	args: /usr/bin/nsenter --mount=/proc/52772/ns/mnt --net=/proc/52772/ns/net --uts=/proc/52772/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce5/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce5/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,225 WARNING: ce6: Router(ce6): proc failed: rc 127 pid 53044
	args: /usr/bin/nsenter --mount=/proc/52847/ns/mnt --net=/proc/52847/ns/net --uts=/proc/52847/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce6/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf/ce6/setup.sh: No such file or directory
	stderr: *empty*
````

This occurs because the topotest attempts to execute the `setup.sh`
file, and the file does not exist.

Let's fix the issue by checking if the `setup.sh` file exists and
executing it only if it does.

Signed-off-by: Carmine Scarpitta <[email protected]>
@cscarpitta
tests: Fix warnings in bgp_srv6l3vpn_to_bgp_vrf2
5d76346 
When performing the `bgp_srv6l3vpn_to_bgp_vrf2` topotest, the following
warnings are observed:

```
2024-07-21 08:01:51,390 WARNING: r1: Router(r1): proc failed: rc 127 pid 52974
	args: /usr/bin/nsenter --mount=/proc/52322/ns/mnt --net=/proc/52322/ns/net --uts=/proc/52322/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/r1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/r1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,522 WARNING: r2: Router(r2): proc failed: rc 127 pid 52984
	args: /usr/bin/nsenter --mount=/proc/52397/ns/mnt --net=/proc/52397/ns/net --uts=/proc/52397/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/r2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/r2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,632 WARNING: ce1: Router(ce1): proc failed: rc 127 pid 52994
	args: /usr/bin/nsenter --mount=/proc/52472/ns/mnt --net=/proc/52472/ns/net --uts=/proc/52472/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,757 WARNING: ce2: Router(ce2): proc failed: rc 127 pid 53004
	args: /usr/bin/nsenter --mount=/proc/52547/ns/mnt --net=/proc/52547/ns/net --uts=/proc/52547/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,878 WARNING: ce3: Router(ce3): proc failed: rc 127 pid 53014
	args: /usr/bin/nsenter --mount=/proc/52622/ns/mnt --net=/proc/52622/ns/net --uts=/proc/52622/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce3/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce3/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,997 WARNING: ce4: Router(ce4): proc failed: rc 127 pid 53024
	args: /usr/bin/nsenter --mount=/proc/52697/ns/mnt --net=/proc/52697/ns/net --uts=/proc/52697/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce4/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce4/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,109 WARNING: ce5: Router(ce5): proc failed: rc 127 pid 53034
	args: /usr/bin/nsenter --mount=/proc/52772/ns/mnt --net=/proc/52772/ns/net --uts=/proc/52772/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce5/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce5/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,225 WARNING: ce6: Router(ce6): proc failed: rc 127 pid 53044
	args: /usr/bin/nsenter --mount=/proc/52847/ns/mnt --net=/proc/52847/ns/net --uts=/proc/52847/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce6/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf2/ce6/setup.sh: No such file or directory
	stderr: *empty*
````

This occurs because the topotest attempts to execute the `setup.sh`
file, and the file does not exist.

Let's fix the issue by checking if the `setup.sh` file exists and
executing it only if it does.

Signed-off-by: Carmine Scarpitta <[email protected]>
@cscarpitta
tests: Fix warnings in bgp_srv6l3vpn_to_bgp_vrf3
e3282e2 
When performing the `bgp_srv6l3vpn_to_bgp_vrf3` topotest, the following
warnings are observed:

```
2024-07-21 08:01:51,390 WARNING: r1: Router(r1): proc failed: rc 127 pid 52974
	args: /usr/bin/nsenter --mount=/proc/52322/ns/mnt --net=/proc/52322/ns/net --uts=/proc/52322/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/r1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/r1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,522 WARNING: r2: Router(r2): proc failed: rc 127 pid 52984
	args: /usr/bin/nsenter --mount=/proc/52397/ns/mnt --net=/proc/52397/ns/net --uts=/proc/52397/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/r2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/r2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,632 WARNING: ce1: Router(ce1): proc failed: rc 127 pid 52994
	args: /usr/bin/nsenter --mount=/proc/52472/ns/mnt --net=/proc/52472/ns/net --uts=/proc/52472/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce1/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce1/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,757 WARNING: ce2: Router(ce2): proc failed: rc 127 pid 53004
	args: /usr/bin/nsenter --mount=/proc/52547/ns/mnt --net=/proc/52547/ns/net --uts=/proc/52547/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce2/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce2/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,878 WARNING: ce3: Router(ce3): proc failed: rc 127 pid 53014
	args: /usr/bin/nsenter --mount=/proc/52622/ns/mnt --net=/proc/52622/ns/net --uts=/proc/52622/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce3/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce3/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:51,997 WARNING: ce4: Router(ce4): proc failed: rc 127 pid 53024
	args: /usr/bin/nsenter --mount=/proc/52697/ns/mnt --net=/proc/52697/ns/net --uts=/proc/52697/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce4/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce4/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,109 WARNING: ce5: Router(ce5): proc failed: rc 127 pid 53034
	args: /usr/bin/nsenter --mount=/proc/52772/ns/mnt --net=/proc/52772/ns/net --uts=/proc/52772/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce5/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce5/setup.sh: No such file or directory
	stderr: *empty*
2024-07-21 08:01:52,225 WARNING: ce6: Router(ce6): proc failed: rc 127 pid 53044
	args: /usr/bin/nsenter --mount=/proc/52847/ns/mnt --net=/proc/52847/ns/net --uts=/proc/52847/ns/uts -F /bin/bash -c /bin/bash /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce6/setup.sh
	stdout: /bin/bash: /media/workspace/frr/tests/topotests/bgp_srv6l3vpn_to_bgp_vrf3/ce6/setup.sh: No such file or directory
	stderr: *empty*
````

This occurs because the topotest attempts to execute the `setup.sh`
file, and the file does not exist.

Let's fix the issue by checking if the `setup.sh` file exists and
executing it only if it does.

Signed-off-by: Carmine Scarpitta <[email protected]>
@Jafaral
Merge pull request #16426 from cscarpitta/fix/remove-annoying-topotes…
b681686 
…t-warnings

tests: Fix topotest warnings
@Jafaral
Merge pull request #16425 from opensourcerouting/fix/do_not_prepend_a…
04b818d 
…n_empty_list_for_pim_vrfs

tools: Do not append an empty list (pim_vrfs) to the config lines
ton31337 and others added 8 commits August 15, 2024 11:51
@ton31337 @rzalamena
Revert "bgpd: set ipv4-mapped ipv6 for ipv4 with ipv6 nexthop"
8beb5c4 
This reverts commit fc5a738.
@ton31337 @rzalamena
Revert "tests: ipv6 global removal in bgp_nexthop_mp_ipv4_6"
163a65d 
This reverts commit 04c220b.
@ton31337 @rzalamena
Revert "bgpd: fix "used" json key on link-local nexthop"
572b1c2 
This reverts commit 2de4dfc.
@ton31337 @rzalamena
Revert "bgpd: fix removing ipv6 global nexhop"
63094de 
This reverts commit ee0378c.
@ton31337 @rzalamena
Revert "bgpd: optimize bgp_interface_address_del"
8b537e0 
This reverts commit fc1dd2e.
@ton31337 @rzalamena
Revert "topotests: add bgp_nexthop_mp_ipv4_6 test"
0b550c4 
This reverts commit 62913cb.

Signed-off-by: Donatas Abraitis <[email protected]>
@RodrigoMNardi
Merge remote-tracking branch 'origin/fix/revert_ipv4_mapped_ipv6_stuf…
1755df9 
…f_10.1' into fix/revert_ipv4_mapped_ipv6_stuff_10.1
@RodrigoMNardi
Merge remote-tracking branch 'origin/master' into fix/revert_ipv4_map…
3063083 
…ped_ipv6_stuff_10.1
@RodrigoMNardi
Copy link
Contributor

ci:rerun

21 similar comments
@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

@RodrigoMNardi
Copy link
Contributor

ci:rerun

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.