✨ source-klaviyo: migrate to poetry (airbytehq#35088)

airbyte-integrations/connectors/source-klaviyo/README.md

@@ -1,102 +1,91 @@
-# Klaviyo Source
+# Klaviyo source connector
 
-This is the repository for the Klaviyo source connector, written in Python.
-For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/klaviyo).
 
-## API Version Migration
-This source is currently migrating from the v1 of Klaviyo API to the latest stable API version, v2023-02-22. Review the [api comparison chart](https://developers.klaviyo.com/en/v2022-10-17/docs/apis_comparison_chart) to see major changes.
+This is the repository for the Klaviyo source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/klaviyo).
 
 ## Local development
 
 ### Prerequisites
-**To iterate on this connector, make sure to complete this prerequisites section.**
+* Python (~=3.9)
+* Poetry (~=1.7) - installation instructions [here](https://python-poetry.org/docs/#installation)
 
-#### Minimum Python version required `= 3.7.0`
-
-#### Build & Activate Virtual Environment and install dependencies
-From this connector directory, create a virtual environment:
-```
-python -m venv .venv
-```
 
-This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
-development environment of choice. To activate it from the terminal, run:
-```
-source .venv/bin/activate
-pip install -r requirements.txt
+### Installing the connector
+From this connector directory, run:
+```bash
+poetry install --with dev
 ```
-If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
 
-Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
-used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
-If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
-should work as you expect.
 
-#### Create credentials
-**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/klaviyo)
-to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_klaviyo/spec.json` file.
+### Create credentials
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/klaviyo)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_klaviyo/spec.yaml` file.
 Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
 See `sample_files/sample_config.json` for a sample config file.
 
-**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source klaviyo test creds`
-and place them into `secrets/config.json`.
 
 ### Locally running the connector
 ```
-python main.py spec
-python main.py check --config secrets/config.json
-python main.py discover --config secrets/config.json
-python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+poetry run source-klaviyo spec
+poetry run source-klaviyo check --config secrets/config.json
+poetry run source-klaviyo discover --config secrets/config.json
+poetry run source-klaviyo read --config secrets/config.json --catalog sample_files/configured_catalog.json
 ```
 
-### Locally running the connector docker image
-
+### Running unit tests
+To run unit tests locally, from the connector directory run:
+```
+poetry run pytest unit_tests
+```
 
-#### Build
-**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
+### Building the docker image
+1. Install [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md)
+2. Run the following command to build the docker image:
 ```bash
 airbyte-ci connectors --name=source-klaviyo build
 ```
 
-An image will be built with the tag `airbyte/source-klaviyo:dev`.
+An image will be available on your host with the tag `airbyte/source-klaviyo:dev`.
 
-**Via `docker build`:**
-```bash
-docker build -t airbyte/source-klaviyo:dev .
-```
 
-#### Run
+### Running as a docker container
 Then run any of the connector commands as follows:
 ```
 docker run --rm airbyte/source-klaviyo:dev spec
 docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-klaviyo:dev check --config /secrets/config.json
 docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-klaviyo:dev discover --config /secrets/config.json
-docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/sample_files:/sample_files airbyte/source-klaviyo:dev read --config /secrets/config.json --catalog /sample_files/configured_catalog.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-klaviyo:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
 ```
 
-## Testing
+### Running our CI test suite
 You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
 ```bash
 airbyte-ci connectors --name=source-klaviyo test
 ```
 
 ### Customizing acceptance Tests
-Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+Customize `acceptance-test-config.yml` file to configure acceptance tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
 If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
 
-## Dependency Management
-All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
-We split dependencies between two groups, dependencies that are:
-* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
-* required for the testing need to go to `TEST_REQUIREMENTS` list
+### Dependency Management
+All of your dependencies should be managed via Poetry. 
+To add a new dependency, run:
+```bash
+poetry add <package-name>
+```
 
-### Publishing a new version of the connector
+Please commit the changes to `pyproject.toml` and `poetry.lock` files.
+
+## Publishing a new version of the connector
 You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?
 1. Make sure your changes are passing our test suite: `airbyte-ci connectors --name=source-klaviyo test`
-2. Bump the connector version in `metadata.yaml`: increment the `dockerImageTag` value. Please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors).
+2. Bump the connector version (please follow [semantic versioning for connectors](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#semantic-versioning-for-connectors)): 
+    - bump the `dockerImageTag` value in in `metadata.yaml`
+    - bump the `version` value in `pyproject.toml`
 3. Make sure the `metadata.yaml` content is up to date.
-4. Make the connector documentation and its changelog is up to date (`docs/integrations/sources/klaviyo.md`).
+4. Make sure the connector documentation and its changelog is up to date (`docs/integrations/sources/klaviyo.md`).
 5. Create a Pull Request: use [our PR naming conventions](https://docs.airbyte.com/contributing-to-airbyte/resources/pull-requests-handbook/#pull-request-title-convention).
 6. Pat yourself on the back for being an awesome contributor.
 7. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.
-
+8. Once your PR is merged, the new version of the connector will be automatically published to Docker Hub and our connector registry.

airbyte-integrations/connectors/source-klaviyo/metadata.yaml

@@ -8,7 +8,7 @@ data:
   definitionId: 95e8cffd-b8c4-4039-968e-d32fb4a69bde
   connectorBuildOptions:
     baseImage: docker.io/airbyte/python-connector-base:1.1.0@sha256:bd98f6505c6764b1b5f99d3aedc23dfc9e9af631a62533f60eb32b1d3dbab20c
-  dockerImageTag: 2.1.1
+  dockerImageTag: 2.1.2
   dockerRepository: airbyte/source-klaviyo
   githubIssueLabel: source-klaviyo
   icon: klaviyo.svg