[nrf fromtree] samples: nrfx_prs: Fix pin assignment on nRF5340 DK

Pins P0.06 and P0.07 are shorted on nRF5340 DKs prepared for on-target tests because that is required for UART tests. That causes background SPIM transfers in this sample to fail because SPIM is not able to drive its SCK line configured as P0.06. Rearrange then the pins used in this sample, so that SCK is not on a pin involved in a GPIO loopback. Signed-off-by: Andrzej Głąbek <[email protected]> (cherry picked from commit 9c874f0)
nrfconnect · Jun 18, 2024 · ff5a2d9 · ff5a2d9
1 parent 17c1aef
commit ff5a2d9
Showing 1 changed file with 6 additions and 6 deletions.
diff --git a/samples/boards/nrf/nrfx_prs/boards/nrf5340dk_nrf5340_cpuapp.overlay b/samples/boards/nrf/nrfx_prs/boards/nrf5340dk_nrf5340_cpuapp.overlay
@@ -1,20 +1,20 @@
 &pinctrl {
 	spi1_default_alt: spi1_default_alt {
 		group1 {
-			psels = <NRF_PSEL(SPIM_SCK, 0, 6)>,
-				<NRF_PSEL(SPIM_MOSI, 0, 7)>;
+			psels = <NRF_PSEL(SPIM_SCK, 0, 25)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 6)>;
 		};
 		group2 {
-			psels = <NRF_PSEL(SPIM_MISO, 0, 25)>;
+			psels = <NRF_PSEL(SPIM_MISO, 0, 7)>;
 			bias-pull-down;
 		};
 	};
 
 	spi1_sleep_alt: spi1_sleep_alt {
 		group1 {
-			psels = <NRF_PSEL(SPIM_SCK, 0, 6)>,
-				<NRF_PSEL(SPIM_MOSI, 0, 7)>,
-				<NRF_PSEL(SPIM_MISO, 0, 25)>;
+			psels = <NRF_PSEL(SPIM_SCK, 0, 25)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 6)>,
+				<NRF_PSEL(SPIM_MISO, 0, 7)>;
 			low-power-enable;
 		};
 	};