Buildbot-nix

Buildbot-nix is a NixOS module designed to integrate Buildbot, a continuous integration (CI) framework, into the Nix ecosystem. This module is under active development, and while it's generally stable and widely used, please be aware that some APIs may change over time.

Getting Started with Buildbot Setup

To set up Buildbot using Buildbot-nix, you can start by exploring the provided examples:

• Check out the basic setup in example.
• Learn about configuring the Buildbot master in master module.
• Understand how to set up a Buildbot worker in worker module.

Additionally, you can find real-world examples at the end of this document.

Buildbot masters and workers can be deployed either on the same machine or on separate machines. To support multiple architectures, configure them as nix remote builders. For a practical NixOS example, see this remote builder configuration.

Using buildbot with NixOS 24.05 (stable release)

The module applies custom patches that only apply to buildbot > 4.0.0. To use buildbot-nix with NixOS 24.05, you should therefore not override the nixpkgs input to your own stable version of buildbot-nix and leave it to the default instead that is set to nixos-unstable-small.

So instead of using this in your flake

inputs = {
  buildbot-nix.url = "github:nix-community/buildbot-nix";
  buildbot-nix.inputs.nixpkgs.follows = "nixpkgs";
};

Just use:

inputs = {
  buildbot-nix.url = "github:nix-community/buildbot-nix";
};

An alternative is to point nixpkgs to your own version of nixpkgs-unstable in case you are already using it elsewhere.

Using Buildbot in Your Project

Buildbot-nix automatically triggers builds for your project under these conditions:

• When a pull request is opened.
• When a commit is pushed to the default git branch.

It does this by evaluating the .#checks attribute of your project's flake in parallel. Each attribute found results in a separate build step. You can test these builds locally using nix flake check -L or nix-fast-build.

If you need to build other parts of your flake, such as packages or NixOS machines, you should re-export these into the .#checks output. Here are two examples to guide you:

• Using flake-parts.
• A plain flake example.

Authentication backend

At the moment buildbot-nix offers two access modes, public and fullyPrivate. public is the default and gives read-only access to all of buildbot, including builds, logs and builders. For read-write access, authentication is still needed, this is controlled by the authBackend option.

fullyPrivate will hide buildbot behind oauth2-proxy which protects the whole buildbot instance. buildbot fetches the currently authenticated user from oauth2-proxy so the same admin, organisation rules apply.

fullyPrivate acccess mode is a workaround as buildbot does not support hiding information natively as now.

Public

For some actions a login is required. This login can either be based on GitHub or on Gitea (more logins may follow). The backend is set by the services.buildbot-nix.master.authBackend NixOS option ("gitea"/"github", "github" by default).

We have the following two roles:

• Admins:
  • The list of admin usernames is hard-coded in the NixOS configuration.
  • admins can reload the project list
• Organisation member:
  • All member of the organisation where this repository is located
  • They can restart builds

Integration with GitHub

GitHub App

This is the preferred option to setup buildbot-nix for GitHub.

To integrate with GitHub using app authentication:

1. GitHub App:
   1. Create a new GitHub app by navigating to https://github.com/settings/apps/new for single-user installations or https://github.com/organizations/<org>/settings/apps/new for organisations where <org> is the name of your GitHub organizaction.
   2. GitHub App Name: "buildbox-nix "
   3. Homepage URL: https://buildbot.<your-domain>
   4. Callback URL: https://buildbot.<your-domain>/auth/login.
   5. Disable the Webhook
   6. Repository Permissions:
   • Contents: Read-only
   • Commit statuses: Read and write
   • Metadata: Read-only
   • Webhooks: Read and write
   7. Organisation Permissions (only if you create this app for an organisation):
   • Members: Read-only
2. GitHub App private key: Get the app private key and app ID from GitHub, configure using the buildbot-nix NixOS module.
   • Set services.buildbot-nix.master.github.authType.app.id = <your-github-id>;
   • Set services.buildbot-nix.master.github.authType.app.secretKeyFile = "/path/to.pem";
3. Install App: Install the app for an organization or specific user.
4. Refresh GitHub Projects: Currently buildbot-nix doesn't respond to changes (new repositories or installations) automatically, it is therefore necessary to manually trigger a reload or wait for the next periodic reload.

Token Auth

To integrate with GitHub using legacy token authentication:

1. GitHub Token: Obtain a GitHub token with admin:repo_hook and repo permissions. For GitHub organizations, it's advisable to create a separate GitHub user for managing repository webhooks.

Optional when using GitHub login

1. GitHub App: Set up a GitHub app for Buildbot to enable GitHub user authentication on the Buildbot dashboard. (can be the same as for GitHub App auth)
2. OAuth Credentials: After installing the app, generate OAuth credentials and configure them in the buildbot-nix NixOS module. Set the callback url to https://<your-domain>/auth/login.

Afterwards add the configured github topic to every project that should build with buildbot-nix. Notice that the buildbot user needs to have admin access to this repository because it needs to install a webhook.

Integration with Gitea

To integrate with Gitea

1. Gitea Token Obtain a Gitea token with the following permissions write:repository and write:user permission. For Gitea organizations, it's advisable to create a separate Gitea user. Buildbot-nix will use this token to automatically setup a webhook in the repository.
2. Gitea App: (optional). This is optional, when using GitHub as the authentication backend for buildbot. Set up a OAuth2 app for Buildbot in the Applications section. This can be done in the global "Site adminstration" settings (only available for admins) or in a Gitea organisation or in your personal settings. As redirect url set https://buildbot.your-buildbot-domain.com/auth/login, where buildbot.your-buildbot-domain.com should be replaced with the actual domain that your buildbot is running on.

Afterwards add the configured gitea topic to every project that should build with buildbot-nix. Notice that the buildbot user needs to have repository write access to this repository because it needs to install a webhook in the repository.

Fully Private

To enable fully private mode, set acessMode.fullyPrivate to an attrset containing the required options for fully private use, refer to the examples and module implementation (nix/master.nix).

This access mode honors the admins option in addition to the accessMode.fullyPrivate.organisations option. To allow access from certain organisations, you must explicitly list them.

If you've set authBackend previously, unset it, or you will get an error about a conflicting definitions. fullyPrivate requires the authBackend to be set to basichttpauth to function (this is handled by the module, which is why you can leave it unset). For a concrete example please refer to fully-private-github

Per Repository Configuration

Currently buildbot-nix will look for a file named buildbot-nix.toml in the root of whichever branch it's currently evaluating, parse it as TOML and apply the configuration specified. The following table illustrates the supported options.

	key	type	description	default	example
lock file	lock_file	str	dictates which lock file buildbot-nix will use when evaluating your flake	flake.lock	have multiple lockfiles, one for nixpkgs-stable, one for nixpkgs-unstable or by default pin an input to a private repo, but have a lockfile with that private repo replaced by a public repo for CI
attribute	attribute	str	which attribute in the flake to evaluate and build	checks	using a different attribute, like hydraJobs

Binary caches

To access the build results on other machines there are two options at the moment

Local binary cache (harmonia)

You can set up a binary cache on your buildbot-worker machine to make its nix store accessible from other machines. Check out the README of the project, for an example configuration

Cachix

Buildbot-nix also supports pushing packages to cachix. Check out the comment out example configuration in our repository.

Attic

Buildbot-nix does not have native support for pushing packages to attic yet. However it's possible to integrate run a systemd service as described in this example configuration. The systemd service watches for changes in the local buildbot-nix store and uploads the contents to the attic cache.

Real-World Deployments

See Buildbot-nix in action in these deployments:

The following instances run on GitHub:

• Nix-community infra: Configuration | Instance
• Mic92's dotfiles: Configuration | Instance
• Technical University Munich: Configuration | Instance
• Numtide: Instance
• Ngi0: Instance

The following instances integrated with Gitea:

• Clan infra: Configuration | Instance

Get in touch

We have a matrix channel at buildbot-nix.

Need commercial support or customization?

For commercial support, please contact Mic92 at [email protected] or reach out to Numtide.