Use MacOS 13 (x86_64) and 14 (arm64) for wheels #9164
JCGoranAnnotations
32 errors and 66 warnings
|
macOS-13 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNRN_ENABLE_RX3D=OFF -DNMODL_SANITIZERS=addressaddress)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - cmake (-DNRN_ENABLE_MPI=OFF -DNRN_ENABLE_INTERVIEWS=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-14 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNRN_ENABLE_RX3D=OFF -DNMODL_SANITIZERS=addressthread)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
The operation was canceled.
|
|
ubuntu-20.04 - setuptools (CC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-20.04 - setuptools (CC=gcc-9 CXX=g++-9)
The operation was canceled.
|
|
ubuntu-24.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_MPI=OFF -DCORENRN_ENABLE_OPENMP=OFF -DNRN_ENABLE_RX3D=OFFthread)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
The operation was canceled.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
The operation was canceled.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
The operation was canceled.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
The operation was canceled.
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
The operation was canceled.
|
|
ubuntu-22.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNMODL_SANITIZERS=undefinedundefined)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
|
|
ubuntu-22.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNMODL_SANITIZERS=addressaddress)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-22.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNMODL_SANITIZERS=addressaddress)
The operation was canceled.
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
The operation was canceled.
|
|
ubuntu-20.04 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
|
|
ubuntu-20.04 - cmake (-DNRN_ENABLE_MPI=OFF -DNRN_ENABLE_INTERVIEWS=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
|
|
ubuntu-20.04 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Canceling since a higher priority waiting request for 'NEURON CI-jelic/try_arm' exists
|
|
ubuntu-20.04 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
The operation was canceled.
|
|
Final CI
Process completed with exit code 1.
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
Cache save failed.
|
|
ubuntu-20.04 - setuptools (CC=gcc-9 CXX=g++-9)
Cache save failed.
|
|
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Cache save failed.
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Treating doxygen as a formula. For the cask, use homebrew/cask/doxygen or specify the `--cask` flag. To silence this message, use the `--formula` flag.
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
doxygen 1.12.0 is already installed and up-to-date.
To reinstall 1.12.0, run:
brew reinstall doxygen
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
bison 3.8.2 is already installed and up-to-date.
To reinstall 3.8.2, run:
brew reinstall bison
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
ninja 1.12.1 is already installed and up-to-date.
To reinstall 1.12.1, run:
brew reinstall ninja
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
xz 5.6.2 is already installed and up-to-date.
To reinstall 5.6.2, run:
brew reinstall xz
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
autoconf 2.72 is already installed and up-to-date.
To reinstall 2.72, run:
brew reinstall autoconf
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
automake 1.17 is already installed and up-to-date.
To reinstall 1.17, run:
brew reinstall automake
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
libtool 2.4.7 is already installed and up-to-date.
To reinstall 2.4.7, run:
brew reinstall libtool
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Treating doxygen as a formula. For the cask, use homebrew/cask/doxygen or specify the `--cask` flag. To silence this message, use the `--formula` flag.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
doxygen 1.12.0 is already installed and up-to-date.
To reinstall 1.12.0, run:
brew reinstall doxygen
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
Cache save failed.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
bison 3.8.2 is already installed and up-to-date.
To reinstall 3.8.2, run:
brew reinstall bison
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
Treating doxygen as a formula. For the cask, use homebrew/cask/doxygen or specify the `--cask` flag. To silence this message, use the `--formula` flag.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
ninja 1.12.1 is already installed and up-to-date.
To reinstall 1.12.1, run:
brew reinstall ninja
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
doxygen 1.12.0 is already installed and up-to-date.
To reinstall 1.12.0, run:
brew reinstall doxygen
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
xz 5.6.2 is already installed and up-to-date.
To reinstall 5.6.2, run:
brew reinstall xz
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
bison 3.8.2 is already installed and up-to-date.
To reinstall 3.8.2, run:
brew reinstall bison
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
autoconf 2.72 is already installed and up-to-date.
To reinstall 2.72, run:
brew reinstall autoconf
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
ninja 1.12.1 is already installed and up-to-date.
To reinstall 1.12.1, run:
brew reinstall ninja
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
automake 1.17 is already installed and up-to-date.
To reinstall 1.17, run:
brew reinstall automake
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
xz 5.6.2 is already installed and up-to-date.
To reinstall 5.6.2, run:
brew reinstall xz
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
libtool 2.4.7 is already installed and up-to-date.
To reinstall 2.4.7, run:
brew reinstall libtool
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
autoconf 2.72 is already installed and up-to-date.
To reinstall 2.72, run:
brew reinstall autoconf
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
automake 1.17 is already installed and up-to-date.
To reinstall 1.17, run:
brew reinstall automake
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
libtool 2.4.7 is already installed and up-to-date.
To reinstall 2.4.7, run:
brew reinstall libtool
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Cache save failed.
|
|
macOS-12 - setuptools (CC=gcc-9 CXX=g++-9)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Treating doxygen as a formula. For the cask, use homebrew/cask/doxygen or specify the `--cask` flag. To silence this message, use the `--formula` flag.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
doxygen 1.12.0 is already installed and up-to-date.
To reinstall 1.12.0, run:
brew reinstall doxygen
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
bison 3.8.2 is already installed and up-to-date.
To reinstall 3.8.2, run:
brew reinstall bison
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
ninja 1.12.1 is already installed and up-to-date.
To reinstall 1.12.1, run:
brew reinstall ninja
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
xz 5.6.2 is already installed and up-to-date.
To reinstall 5.6.2, run:
brew reinstall xz
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
autoconf 2.72 is already installed and up-to-date.
To reinstall 2.72, run:
brew reinstall autoconf
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
automake 1.17 is already installed and up-to-date.
To reinstall 1.17, run:
brew reinstall automake
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
libtool 2.4.7 is already installed and up-to-date.
To reinstall 2.4.7, run:
brew reinstall libtool
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (CC=gcc-10 CXX=g++-10)
Cache save failed.
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
Treating doxygen as a formula. For the cask, use homebrew/cask/doxygen or specify the `--cask` flag. To silence this message, use the `--formula` flag.
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
doxygen 1.12.0 is already installed and up-to-date.
To reinstall 1.12.0, run:
brew reinstall doxygen
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
bison 3.8.2 is already installed and up-to-date.
To reinstall 3.8.2, run:
brew reinstall bison
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
ninja 1.12.1 is already installed and up-to-date.
To reinstall 1.12.1, run:
brew reinstall ninja
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
xz 5.6.2 is already installed and up-to-date.
To reinstall 5.6.2, run:
brew reinstall xz
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
autoconf 2.72 is already installed and up-to-date.
To reinstall 2.72, run:
brew reinstall autoconf
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
automake 1.17 is already installed and up-to-date.
To reinstall 1.17, run:
brew reinstall automake
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
libtool 2.4.7 is already installed and up-to-date.
To reinstall 2.4.7, run:
brew reinstall libtool
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
macOS-12 - cmake (-DNRN_ENABLE_PYTHON=OFF -DNRN_ENABLE_RX3D=OFF -DNRN_ENABLE_CORENEURON=ONCC=gcc-10 CXX=g++-10)
You are using macOS 12.
We (and Apple) do not provide support for this old version.
It is expected behaviour that some formulae will fail to build in this old version.
It is expected behaviour that Homebrew will be buggy and slow.
Do not create any issues about this on Homebrew's GitHub repositories.
Do not create any issues even if you think this message is unrelated.
Any opened issues will be immediately closed without response.
Do not ask for help from Homebrew or its maintainers on social media.
You may ask for help in Homebrew's discussions but are unlikely to receive a response.
Try to figure out the problem yourself and submit a fix as a pull request.
We will review it but may or may not accept it.
|
|
|
|
|
|
ubuntu-22.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNMODL_SANITIZERS=undefinedundefined):
src/nrnpython/nrnpython.cpp#L199
'Py_NoSiteFlag' is deprecated [-Wdeprecated-declarations]
|
|
ubuntu-22.04 - cmake (-DNRN_ENABLE_CORENEURON=ON -DNRN_ENABLE_INTERVIEWS=OFF -DNMODL_SANITIZERS=undefinedundefined):
src/nrniv/matrixmap.cpp#L35
loop variable '[i, j]' creates a copy from type 'std::pair<int, int> const' [-Wrange-loop-construct]
|
|
|
|
ubuntu-20.04 - cmake (CC=gcc-10 CXX=g++-10)
Cache save failed.
|
|
|
|
|
|
ubuntu-20.04 - cmake (-DNRN_ENABLE_CORENEURON=ONCC=gcc-9 CXX=g++-9)
Cache save failed.
|