[WIP] cake plugins

plugins/cake/cake_

@@ -0,0 +1,210 @@
+#!/bin/bash
+# -*- sh -*-
+
+: << =cut
+
+=pod
+
+=encoding UTF-8
+
+=head1 NAME
+
+cake_ - Plugin to monitor cake's backlog, dropped, overlimits and requeues
+
+=head1 CONFIGURATION
+
+None needed.
+
+=head1 INTERPRETATION
+
+Cake, also known as sch_cake is a modern bandwidth limiter, which eliminates
+buffer bloat over slow links. It's also capable to give flows, hosts and each 
+flow of each host a fair part of the avaible bandwidth.
+
+This plugin allows for a monitor of the pressure on the qdisc, by monitoring key
+values.
+
+=head1 SEE ALSO
+
+Take a look at "man cake" to get more information about cake.
+
+=head1 MAGIC MARKERS
+
+ #%# family=auto
+ #%# capabilities=autoconf suggest
+
+=head1 AUTHORS
+
+RubenKelevra <[email protected]>
+
+work based on the tc plugin, authors:
+Steve Schnepp <[email protected]>,
+Samuel Smith <[email protected]>,
+Nye Liu <[email protected]>
+
+=head1 LICENSE
+
+GPLv2 or later
+
+=cut
+
+DEVICE="${0##*/cake_}"
+
+tc_get_ifb_dev() {
+	dev="$(/sbin/tc filter show dev "$DEVICE" parent ffff: protocol all | grep "mirred" | grep "Egress Redirect to device")"
+	[ $? -eq 1 ] && return 1
+
+	echo "$dev" | sed -n 's/.* device \([^ ]*\).*/\1/p' | tr ')' ' ' | awk '{ print $1 }'
+}
+
+tc_cake_sent() {
+	/sbin/tc -s qdisc show dev "$1" | grep -E "^ Sent" | tr ',' ' ' | tr ')' ' ' 
+}
+tc_cake_backlog() {
+	/sbin/tc -s qdisc show dev "$1" | grep -E "^ backlog" | tr 'p' ' ' 
+}
+
+DEVICE_IN="$(tc_get_ifb_dev)"
+has_if_in=$?
+
+case "$1" in
+	autoconf)
+	if [ -r /proc/net/dev ]; then
+		echo yes
+		exit 0
+	else
+		echo "no (/proc/net/dev not found)"
+		exit 1
+	fi
+	;;
+	suggest)
+	if [ -r /proc/net/dev ]; then
+		ifs="$(awk '
+				/^ *(eth|tap|bond|wlan|ath|ra|sw|eno|ens|enp|wlp|wl)[0-9]*/ {
+				   split($0, a, /: */);
+				   gsub(/^ +/,"",a[1]);
+				   if (($2 > 0) || ($10 > 0)) print a[1]; }' /proc/net/dev)"
+		cake_ifs=()
+		for if in $ifs; do
+			qdisc="$(/sbin/tc -s qdisc show dev "$if" | head -n1 | awk '{ print $2 }')"
+			if [ "$qdisc" == "cake" ]; then
+				cake_ifs+=("$if")
+			fi
+		done
+		echo "$cake_ifs"
+	fi
+	exit 0
+	;;
+	config)
+
+	if [ $has_if_in -eq 0 ]; then
+		echo "graph_title $DEVICE ($DEVICE_IN) cake queuing"
+	else
+		echo "graph_title $DEVICE cake queuing"
+	fi
+	echo 'graph_args --base 1000 --logarithmic'
+	if [ $has_if_in -eq 0 ]; then
+		echo 'graph_vlabel pps in (-) / out (+)'
+	else
+		echo 'graph_vlabel packets per second'
+	fi
+	echo 'graph_category network'
+	if [ $has_if_in -eq 0 ]; then
+		echo "graph_info This graph shows the general packet handling status of egress+ingress traffic of the $DEVICE ($DEVICE_IN) network interface."
+	else
+		echo "graph_info This graph shows the general packet handling status of egress traffic of the $DEVICE network interface."
+	fi
+
+	if [ $has_if_in -eq 0 ]; then
+		echo "backlog_in.label backlog"
+		echo "backlog_in.draw LINE2"
+		echo "backlog_in.colour 85c4e0"
+		echo "backlog_in.min 0"
+		echo "backlog_in.info amount of packets currently buffered. This is an absolut value at the time the plugin is running, not an avg over the last 5 minutes (as all other values in this graph)"
+		echo "backlog_in.graph no"
+	fi
+	echo "backlog.label backlog"
+	echo "backlog.draw LINE2"
+	echo "backlog.colour 85c4e0"
+	echo "backlog.min 0"
+	echo "backlog.info amount of packets currently buffered"
+	[ $has_if_in -eq 0 ] && echo "backlog.negative backlog_in"
+
+	if [ $has_if_in -eq 0 ]; then
+		echo "dropped_in.label dropped"
+		echo "dropped_in.draw AREA"
+		echo "dropped_in.colour c77223"
+		echo "dropped_in.type DERIVE"
+		echo "dropped_in.min 0"
+		echo "dropped_in.info dropped packets in queue"
+		echo "dropped_in.graph no"
+	fi
+	echo "dropped.label dropped"
+	echo "dropped.draw AREA"
+	echo "dropped.colour c77223"
+	echo "dropped.type DERIVE"
+	echo "dropped.min 0"
+	echo "dropped.info dropped packets in queue"
+	[ $has_if_in -eq 0 ] && echo "dropped.negative dropped_in"
+
+	if [ $has_if_in -eq 0 ]; then
+		echo "overlimits_in.label overlimits"
+		echo "overlimits_in.draw STACK"
+		echo "overlimits_in.colour b6655c"
+		echo "overlimits_in.type DERIVE"
+		echo "overlimits_in.min 0"
+		echo "overlimits_in.info packets exeeded a limit"
+		echo "overlimits_in.graph no"
+	fi
+	echo "overlimits.label overlimits"
+	echo "overlimits.draw STACK"
+	echo "overlimits.colour b6655c"
+	echo "overlimits.type DERIVE"
+	echo "overlimits.min 0"
+	echo "overlimits.info packets exeeded a limit"
+	[ $has_if_in -eq 0 ] && echo "overlimits.negative overlimits_in"
+
+	if [ $has_if_in -eq 0 ]; then
+		echo "requeues_in.label requeues"
+		echo "requeues_in.draw STACK"
+		echo "requeues_in.colour 4e9e14"
+		echo "requeues_in.type DERIVE"
+		echo "requeues_in.min 0"
+		echo "requeues_in.info packets requeued in queue"
+		echo "requeues_in.graph no"
+	fi
+	echo "requeues.label requeues"
+	echo "requeues.draw STACK"
+	echo "requeues.colour 4e9e14"
+	echo "requeues.type DERIVE"
+	echo "requeues.min 0"
+	echo "requeues.info packets requeued in queue"
+	[ $has_if_in -eq 0 ] && echo "requeues.negative requeues_in"
+
+	exit 0
+	;;
+esac
+
+tc_cake_sent "$DEVICE" | awk '{
+	print "dropped.value " $7
+	print "overlimits.value " $9
+	print "requeues.value " $11
+}'
+
+tc_cake_backlog "$DEVICE" | awk '{
+	print "backlog.value " $3
+}'
+
+if [ $has_if_in -eq 0 ]; then
+	tc_cake_sent "$DEVICE_IN" | awk '{
+		print "dropped_in.value " $7
+		print "overlimits_in.value " $9
+		print "requeues_in.value " $11
+	}'
+
+	tc_cake_backlog "$DEVICE_IN" | awk '{
+		print "backlog_in.value " $3
+	}'
+fi
+
+