Added V2 EZABL configuration files

422-EZABL/Version.h

@@ -0,0 +1,79 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+////////////////////////////
+// VENDOR VERSION EXAMPLE //
+////////////////////////////
+
+/**
+ * Marlin release version identifier
+ */
+#define SHORT_BUILD_VERSION "2.0.9.4 MRiscoC"
+
+/**
+ * Verbose version identifier which should contain a reference to the location
+ * from where the binary was downloaded or the source code was compiled.
+ */
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " 422 EZABL, based on bugfix-2.0.x"
+
+/**
+ * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+ * here we define this default string as the date where the latest release
+ * version was tagged.
+ */
+//#define STRING_DISTRIBUTION_DATE "2022-03-11"
+
+#define STRING_DISTRIBUTION_DATE __DATE__
+#define STRING_DISTRIBUTION_TIME __TIME__
+
+/**
+ * Defines a generic printer name to be output to the LCD after booting Marlin.
+ */
+#define MACHINE_NAME "Ender3v2"
+
+/**
+ * The SOURCE_CODE_URL is the location where users will find the Marlin Source
+ * Code which is installed on the device. In most cases —unless the manufacturer
+ * has a distinct Github fork— the Source Code URL should just be the main
+ * Marlin repository.
+ */
+#define SOURCE_CODE_URL "github.com/mriscoc/Ender3V2S1"
+
+/**
+ * Default generic printer UUID.
+ */
+//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
+
+/**
+ * The WEBSITE_URL is the location where users can get more information such as
+ * documentation about a specific Marlin release.
+ */
+#define WEBSITE_URL "github.com/mriscoc/Ender3V2S1/wiki"
+
+/**
+ * Set the vendor info the serial USB interface, if changable
+ * Currently only supported by DUE platform
+ */
+//#define USB_DEVICE_VENDOR_ID           0x0000
+//#define USB_DEVICE_PRODUCT_ID          0x0000
+//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL