DNDSync

This App was developed to enable synchronization between the smartphone and the Galaxy Watch 4 of the Do Not Disturb (DND) and Bedtime mode from Digital Wellbeing. DND synchronization is only supported officially if using a Samsung phone with this smartwatch, Bedtime mode synchronization is only newly available for the newest Pixel Watch 2:

• With this repo you get both!

Functionalities:

• 1-way sync or a 2-way sync of DND, depending on the preferences
• Automatically toggle Bedtime mode for the watch whenever it is activated on the phone
  • At night, when I charge my phone, bedtime mode on the phone is enabled and I wanted to sync and enable same mode on the watch
• Automatically toggle Power Saver mode in combo with bedtime mode on the watch, whenever bedtime mode is synced from the phone

Majority of the credits goes to @rhaeus for the initial developing of this app and to @DreadedLama for the initial developing of a better bedtime mode implementation!

Tested on Nothing Phone (1) (Android 13) paired with a Galaxy Watch 4 (40mm, Wear OS 4.0)

Setup

Manual installation is required. The use of ADB is required. (Don't worry, it's very easy!)

• Download the latest .apk files from the 'Releases' section (dndsync-mobile.apk and dndsync-wear.apk)
• Be sure to enable notifications for Bedtime mode of the Digital Wellbeing app on your phone (They are by default)
  • This app knows that bedtime mode is activated when its notification pops up (since there's no public API for the Digital Wellbeing app)

Phone

1. Install the app dndsync-mobile.apk on the phone via adb
   • Enable USB Debugging in the Developer Options of your phone and the connect it to the PC
   • Run adb install dndsync-mobile.apk
2. Disconnect the phone from the PC
   • Disable USB Debugging from the Developer Options of your phone
3. Open the app and grant the permission for DND Access and Bedtime Access by clicking on the menu entry DND-Bedtime Permission. This will open the permission screen.
   • This Permission is required so that the app can read/write DND state and read Bedtime mode. Without this permission, the sync will not work.
4. Go back on the app and check that DND-Bedtime Permission say DND-Bedtime access granted (you may need to tap on the menu entry for it to update)
5. Turn on the switch for the mode that you'd like to sync (you can enable both, of course):
   • With the Sync DND state to watch switch you can enable and disable the sync for DND mode. If enabled, a DND change on the phone will lead to DND change on the watch.
   • With the Sync Bedtime mode to watch switch you can enable and disable the sync for bedtime mode. If enabled, when Bedtime mode is enabled/disabled/paused on the phone, it will be enabled/disabled/paused on the watch

Watch

Setting up the watch is a bit more tricky since the watch OS lacks the permission screen for DND access, but the permission needed can be easily set via ADB*!

Note: This is only tested on my Galaxy Watch 4 and it might not work on other devices!

1. Connect the watch to your computer via adb (watch and computer have to be in the same network!)
   • Enable Developer Options: Go to Settings -> About watch -> Software -> tap the Software version 5 times -> developer mode is on (you can disable it in the same way)
   • Enable ADB debugging and Debug over WIFI (in Settings -> Developer Options)
   • Click on Pair new device
   • Note the watch IP address and port, something like 192.168.0.100:5555
   • Note also the pair key, something like 123456
   • Pair the watch with adb pair 192.168.0.100:5555 123456 (insert your value!)
   • Now you will be brought back to the Debug over WIFI menu, note the new port, something like :6666
   • Connect to the watch with adb connect 192.168.0.100:6666 (The ip address stays the same, the port changes!)
2. Install the app dndsync-wear.apk on the watch
   • Run adb install dndsync-wear.apk
3. Grant permission for DND access (This allows the app to listen to DND changes and to change the DND setting)
   • Run adb shell cmd notification allow_listener de.rhaeus.dndsync/de.rhaeus.dndsync.DNDNotificationService
4. Grant permission for Secure Setting access (This allows the app to change BedTime mode setting on the watch)
   • Run adb shell pm grant de.rhaeus.dndsync android.permission.WRITE_SECURE_SETTINGS
5. Open the app on the watch, scroll to the permission section and check if both DND Permission and Secure Settings Permission say Granted (you may need to tap on the menu entries for them to update)
6. IMPORTANT: Disable ADB debugging and Debug over WIFI, because these options drain the battery!
7. Turn on the switch for the mode that you'd like to sync (you can enable all of them, of course)
   • If you enable the setting Sync DND in the App, a DND change on the watch will lead to a DND change on the phone
   • If you enable the setting Bedtime Mode in the App, the watch will copy the bedtime mode status of the phone, it's a 1-way sync
   • If you enable the setting Power Saver Mode in the App, the watch will turn on power saver mode whenever the Bedtime Mode is synced from the phone
   • If you enable the setting Vibration in the App, the watch will vibrate whenever it receives a sync request from the phone

To do (developers)

There are only two flags which the Power saver mode of this app does not enable but which are enabled by the Power saver mode of the watch itself:

• Change screen timeout setting to 10 sec when Power Saver Mode is enabled, just like it is if enabled via the watch
• (Optional) For coherence, also the wake up the watch by tilt should be disabled via code. This is optional since it is disabled automatically whenever the low power mode is enabled and does not require setting manually the flag to 0, but still

Pull requests are welcome!

Note

If you are unable to "Allow Notification Access" to the mobile app and it is faded, go the apps section in Settings, open DNDSync app, click 3 dots on top right and grant "Allow Restricted Settings" access. Now you'll be able to grant the Notification access to mobile app.