Skip to content

Valheim dedicated gameserver with automatic update, World backup, BepInEx and ValheimPlus mod support

License

Notifications You must be signed in to change notification settings

lloesche/valheim-server-docker

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

lloesche/valheim-server Docker image

Valheim

Valheim Server in a Docker Container (with BepInEx and ValheimPlus support)
This project is hosted at https://github.com/lloesche/valheim-server-docker

Table of contents

Basic Docker Usage

The name of the Docker image is ghcr.io/lloesche/valheim-server.

Volume mount the server config directory to /config within the Docker container.

If you have an existing world on a Windows system you can copy it from e.g.
C:\Users\Lukas\AppData\LocalLow\IronGate\Valheim\worlds_local to e.g.
$HOME/valheim-server/config/worlds_local and run the image with $HOME/valheim-server/config volume mounted to /config inside the container. The container directory /opt/valheim contains the downloaded server. It can optionally be volume mounted to avoid having to download the server on each fresh start.

$ mkdir -p $HOME/valheim-server/config/worlds_local $HOME/valheim-server/data
# copy existing world
$ docker run -d \
    --name valheim-server \
    --cap-add=sys_nice \
    --stop-timeout 120 \
    -p 2456-2457:2456-2457/udp \
    -v $HOME/valheim-server/config:/config \
    -v $HOME/valheim-server/data:/opt/valheim \
    -e SERVER_NAME="My Server" \
    -e WORLD_NAME="Neotopia" \
    -e SERVER_PASS="secret" \
    ghcr.io/lloesche/valheim-server

Warning: SERVER_PASS must be at least 5 characters long. Otherwise valheim_server.x86_64 will refuse to start!

A fresh start will take several minutes depending on your Internet connection speed as the container will download the Valheim dedicated server from Steam (~1 GB).

Do not forget to modify WORLD_NAME to reflect the name of your world! For existing worlds that is the filename in the worlds_local/ folder without the .db/.fwl extension.

If you want to play with friends over the Internet and are behind NAT make sure that UDP ports 2456-2457 are forwarded to the container host. (Remark: If you use crossplay, you don't need port forwarding! See official Valheim Dedicated Server Manual.pdf in the data/server folder.) Also ensure they are publicly accessible in any firewall.

Crossplay: To enable crossplay between different platforms add -crossplay to SERVER_ARGS:

    -e SERVER_ARGS="-crossplay"

There is more info in section Finding Your Server.

For LAN-only play see section Steam Server Favorites & LAN Play

For more deployment options see the Deployment section.

Granting CAP_SYS_NICE to the container is optional. It allows the Steam library that Valheim uses to give itself more CPU cycles. Without it you will see a message Warning: failed to set thread priority in the startup log.

Environment Variables

All variable names and values are case-sensitive!

Name Default Purpose
SERVER_NAME My Server Name that will be shown in the server browser
SERVER_PORT 2456 UDP start port that the server will listen on
WORLD_NAME Dedicated Name of the world without .db/.fwl file extension
SERVER_PASS secret Password for logging into the server - min. 5 characters!
SERVER_PUBLIC true Whether the server should be listed in the server browser (true) or not (false)
SERVER_ARGS Additional Valheim server CLI arguments
ADMINLIST_IDS Space separated list of admin SteamIDs in SteamID64 format. Overrides any existing adminlist.txt entries!
BANNEDLIST_IDS Space separated list of banned SteamIDs in SteamID64 format. Overrides any existing bannedlist.txt entries!
PERMITTEDLIST_IDS Space separated list of whitelisted SteamIDs in SteamID64 format. Overrides any existing permittedlist.txt entries!
UPDATE_CRON */15 * * * * Cron schedule for update checks (disabled if set to an empty string or if the legacy UPDATE_INTERVAL is set)
IDLE_DATAGRAM_WINDOW 3 The time window, in seconds, to wait for incoming UDP datagrams on non-public servers before determining if the server is idle
IDLE_DATAGRAM_MAX_COUNT 30 The number of incoming UDP datagrams the container should tolerate (including useless datagrams such as mDNS, as well as useful datagrams like queries against the UDP query port and active connections by players) on non-public servers before deciding that the server is not idle
UPDATE_IF_IDLE true Only run update check if no players are connected to the server (true or false)
RESTART_CRON 0 5 * * * Cron schedule for server restarts (disabled if set to an empty string)
RESTART_IF_IDLE true Only run daily restart if no players are connected to the server (true or false)
TZ Etc/UTC Container time zone
BACKUPS true Whether the server should create periodic backups (true or false)
BACKUPS_CRON 0 * * * * Cron schedule for world backups (disabled if set to an empty string or if the legacy BACKUPS_INTERVAL is set)
BACKUPS_DIRECTORY /config/backups Path to the backups directory
BACKUPS_MAX_AGE 3 Age in days after which old backups are flushed
BACKUPS_MAX_COUNT 0 Maximum number of backups kept, 0 means infinity
BACKUPS_IF_IDLE true Backup even when no players have been connected for a while
BACKUPS_IDLE_GRACE_PERIOD 3600 Grace period in seconds after the last player has disconnected in which we will still create backups when BACKUPS_IF_IDLE=false
BACKUPS_ZIP true Compress Backups with zip. If set to false Backups will be stored uncompressed.
PERMISSIONS_UMASK 022 Umask to use for backups, config files and directories
STEAMCMD_ARGS validate Additional steamcmd CLI arguments
PUBLIC_TEST false Run the Public Test Beta version of Valheim server. Note that this simply extends existing STEAMCMD_ARGS by adding the appropriate beta flags to it.
VALHEIM_PLUS false Whether ValheimPlus mod should be loaded (config in /config/valheimplus, additional plugins in /config/valheimplus/plugins). Can not be used together with BEPINEX.
VALHEIM_PLUS_REPO Grantapher/ValheimPlus Which ValheimPlus Github repo to use. Useful for switching to forks.
VALHEIM_PLUS_RELEASE latest Which version of ValheimPlus to download. Will default to latest available. To specify a specific tag set to tags/0.9.9.8
BEPINEX false Whether BepInExPack Valheim mod should be loaded (config in /config/bepinex, plugins in /config/bepinex/plugins). Can not be used together with VALHEIM_PLUS.
SUPERVISOR_HTTP false Turn on supervisor's http server
SUPERVISOR_HTTP_PORT 9001 Set supervisor's http server port
SUPERVISOR_HTTP_USER admin Supervisor http server username
SUPERVISOR_HTTP_PASS Supervisor http server password
STATUS_HTTP false Turn on the status http server. Only useful on public servers (SERVER_PUBLIC=true).
STATUS_HTTP_PORT 80 Status http server tcp port
STATUS_HTTP_CONF /config/httpd.conf Path to the busybox httpd config
STATUS_HTTP_HTDOCS /opt/valheim/htdocs Path to the status httpd htdocs where status.json is written
SYSLOG_REMOTE_HOST Remote syslog host or IP to send logs to
SYSLOG_REMOTE_PORT 514 Remote syslog UDP port to send logs to
SYSLOG_REMOTE_AND_LOCAL true When sending logs to a remote syslog server also log local
PUID 0 UID to run valheim-server as
PGID 0 GID to run valheim-server as

There are a few undocumented environment variables that could break things if configured wrong. They can be found in defaults.

Log filters

Valheim server by default logs a lot of noise. These env variables allow users to remove unwanted lines from the log.

Prefix Default Purpose
VALHEIM_LOG_FILTER_EMPTY true Filter empty log lines
VALHEIM_LOG_FILTER_UTF8 true Filter invalid UTF-8 characters
VALHEIM_LOG_FILTER_MATCH Filter log lines exactly matching
VALHEIM_LOG_FILTER_STARTSWITH (Filename: Filter log lines starting with
VALHEIM_LOG_FILTER_ENDSWITH Filter log lines ending with
VALHEIM_LOG_FILTER_CONTAINS Filter log lines containing
VALHEIM_LOG_FILTER_REGEXP Filter log lines matching regexp

The default filter removes:

  • Empty log lines
  • Log lines consisting of a single space (wtf?)
  • A repeating line saying (Filename: ./Runtime/Export/Debug/Debug.bindings.h Line: 35)
  • Lines flooding the log with Assertion Failed warnings on packet processing timeouts (See #104)
  • If ValheimPlus is turned on lines starting with Fallback handler could not load library

Log filter event hooks

If an environment variable prefixed with ON_ exists for an identically named log filter, instead of removing the log line the contents of the variable will be executed when the filter matches with the log line piped on stdin.

Prefix Purpose
ON_VALHEIM_LOG_FILTER_MATCH Run command hook on log lines exactly matching
ON_VALHEIM_LOG_FILTER_STARTSWITH Run command hook on log lines starting with
ON_VALHEIM_LOG_FILTER_ENDSWITH Run command hook on log lines ending with
ON_VALHEIM_LOG_FILTER_CONTAINS Run command hook on log lines containing
ON_VALHEIM_LOG_FILTER_REGEXP Run command hook on regexp match

All environment variables except for VALHEIM_LOG_FILTER_EMPTY and VALHEIM_LOG_FILTER_UTF8 are prefixes. Meaning you can define multiple matches like so:

-e VALHEIM_LOG_FILTER_STARTSWITH=foo \
-e VALHEIM_LOG_FILTER_STARTSWITH_BAR=bar \
-e VALHEIM_LOG_FILTER_STARTSWITH_SOMETHING_ELSE="some other filter"
-e VALHEIM_LOG_FILTER_CONTAINS_Connected="Got character ZDOID from"
-e ON_VALHEIM_LOG_FILTER_CONTAINS_Connected="cat >> /tmp/character_login"

Discord log filter event hook example

Sends a Discord message whenever a player spawns

-e DISCORD_WEBHOOK="https://discord.com/api/webhooks/8171522530..." \
-e VALHEIM_LOG_FILTER_CONTAINS_Spawned="Got character ZDOID from" \
-e ON_VALHEIM_LOG_FILTER_CONTAINS_Spawned='{ read l; l=${l//*ZDOID from /}; l=${l// :*/}; msg="Player $l spawned into the world"; curl -sfSL -X POST -H "Content-Type: application/json" -d "{\"username\":\"Valheim\",\"content\":\"$msg\"}" "$DISCORD_WEBHOOK"; }'

See Notify on Discord below for proper quoting in env and compose files.

If you are running ValheimPlus and this filter triggers twice, check this ValheimPlus issue. The cause is a misconfigured BepInEx.cfg that causes all log lines to be duplicated.

Event hooks

The following environment variables can be populated to run commands whenever specific events happen.

Name Default Purpose
PRE_SUPERVISOR_HOOK Command to be executed before supervisord is run. Startup is blocked until this command returns.
PRE_BOOTSTRAP_HOOK Command to be executed before bootstrapping is done. Startup is blocked until this command returns.
POST_BOOTSTRAP_HOOK Command to be executed after bootstrapping is done and before the server or any services are started. Can be used to install additional packages or perform additional system setup. Startup is blocked until this command returns.
PRE_BACKUP_HOOK Command to be executed before a backup is created. The string @BACKUP_FILE@ will be replaced by the full path of the future backup zip file. Backups are blocked until this command returns.
POST_BACKUP_HOOK Command to be executed after a backup is created. The string @BACKUP_FILE@ will be replaced by the full path of the backup zip file. Backups are blocked until this command returns. See Copy backups to another location for details.
PRE_UPDATE_CHECK_HOOK Command to be executed before an update check is performed. Current update is blocked until this command returns.
POST_UPDATE_CHECK_HOOK Command to be executed after an update check was performed. Future updates are blocked until this command returns.
PRE_START_HOOK Command to be executed before the first server start is performed by the valheim-updater. Current start is blocked until this command returns.
POST_START_HOOK Command to be executed after the first server start was performed by the valheim-updater. Future restarts and update checks are blocked until this command returns.
PRE_RESTART_HOOK Command to be executed before a server restart is performed by the valheim-updater. Current restart is blocked until this command returns.
PRE_SERVER_LISTENING_HOOK Command to be executed after the server runs, but before it's able to accept connections. The loop that checks connection status will be blocked until this command returns.
POST_SERVER_LISTENING_HOOK Command to be executed once the server is available for players to connect! The hook only fires after status is updated to running.
POST_RESTART_HOOK Command to be executed after a server restart was performed by the valheim-updater. Future restarts and update checks are blocked until this command returns.
PRE_SERVER_RUN_HOOK Command to be executed before the server is started. Server startup is blocked until this command returns.
POST_SERVER_RUN_HOOK Command to be executed after the server has finished running. Server shutdown is blocked until this command returns or a shutdown timeout is triggered after 29 seconds.
PRE_SERVER_SHUTDOWN_HOOK Command to be executed before the server is shut down. Server shutdown is blocked until this command returns. If PRE_SERVER_SHUTDOWN_HOOK holds the shutdown process for more than 90 seconds, the entire process will be hard-killed by supervisord.
POST_SERVER_SHUTDOWN_HOOK Command to be executed after the server has finished shutting down.
PRE_BEPINEX_CONFIG_HOOK Command to be executed before writing BepInEx.cfg.
POST_BEPINEX_CONFIG_HOOK Command to be executed after writing BepInEx.cfg. Can be used to write your own mod config using env2cfg.

Event hook examples

Install extra packages

-e POST_BOOTSTRAP_HOOK="apt-get update && DEBIAN_FRONTEND=noninteractive apt-get -y install awscli"

Copy backups to another location

After a backup ZIP has been created the command specified by $POST_BACKUP_HOOK will be executed if set to a non-zero string. Within that command the string @BACKUP_FILE@ will be replaced by the full path to the just created ZIP file.

-v $HOME/.ssh/id_rsa:/root/.ssh/id_rsa \
-v $HOME/.ssh/known_hosts:/root/.ssh/known_hosts \
-e POST_BACKUP_HOOK='timeout 300 scp @BACKUP_FILE@ [email protected]:~/backups/$(basename @BACKUP_FILE@)'

Notify on Discord

Because proper string quoting on the shell vs. inside a docker-compose.yaml vs. an env_file can be challenging, here are examples for each use case.

Using the commandline

Delay restarts by 1 minute and notify on Discord

-e DISCORD_WEBHOOK="https://discord.com/api/webhooks/8171522530..." \
-e DISCORD_MESSAGE="Restarting Valheim server in one minute!" \
-e PRE_RESTART_HOOK='curl -sfSL -X POST -H "Content-Type: application/json" -d "{\"username\":\"Valheim\",\"content\":\"$DISCORD_MESSAGE\"}" "$DISCORD_WEBHOOK" && sleep 60'
Inside docker-compose.yaml

Notify on Discord with server's name in the message

    environment:
      - DISCORD_WEBHOOK=https://discord.com/api/webhooks/8171522530...
      - DISCORD_MESSAGE=Starting Valheim server $$SERVER_NAME
      - 'PRE_BOOTSTRAP_HOOK=curl -sfSL -X POST -H "Content-Type: application/json" -d "{\"username\":\"Valheim\",\"content\":\"$$(eval echo $$DISCORD_MESSAGE)\"}" "$$DISCORD_WEBHOOK"'
Inside an env_file
DISCORD_WEBHOOK=https://discord.com/api/webhooks/8171522530...
DISCORD_MESSAGE=Starting Valheim server
PRE_BOOTSTRAP_HOOK=curl -sfSL -X POST -H "Content-Type: application/json" -d "{\"username\":\"Valheim\",\"content\":\"$DISCORD_MESSAGE\"}" "$DISCORD_WEBHOOK"

Notify on Matrix, inside an env_file

Create an account for your bot, log in and join the room you want to post to. The room ID is noted in the room's settings.

MATRIX_BOT_SERVER=https://matrix...
MATRIX_BOT_ROOM_ID=!...
MATRIX_BOT_ACCESS_TOKEN=...
PRE_RESTART_HOOK=curl -sfSL -X PUT -d "{\"msgtype\":\"m.notice\",\"body\":\"Valheim is being updated\"}" "$MATRIX_BOT_SERVER/_matrix/client/r0/rooms/$MATRIX_BOT_ROOM_ID/send/m.room.message/$(date +%s-%N)?access_token=$MATRIX_BOT_ACCESS_TOKEN"

Note the $(date +%s-%N) is used for the required unique txnId.

Mod config from Environment Variables

Mod config can be specified in environment variables using the syntax <prefix>_<section>_<variable>=<value>.

Predefined prefix list

Prefix Mod File
VPCFG ValheimPlus /config/valheimplus/valheim_plus.cfg
BEPINEXCFG BepInEx /config/valheimplus/BepInEx.cfg or /config/bepinex/BepInEx.cfg depending on whether VALHEIM_PLUS=true or BEPINEX=true

Translation table
Some characters that are allowed as section names in the config files are not allowed as environment variable names. They can be encoded using the following translation table.

Variable name string Replacement
_DOT_ .
_HYPHEN_ -
_UNDERSCORE_ _
_PLUS_ +
_SPACE_

Example:

-e VALHEIM_PLUS=true \
-e VPCFG_Server_enabled=true \
-e VPCFG_Server_enforceMod=false \
-e VPCFG_Server_dataRate=500 \
-e BEPINEXCFG_Logging_DOT_Console_Enabled=true

turns into /config/valheimplus/valheim_plus.cfg

[Server]
enabled=true
enforceMod=false
dataRate=500

and /config/valheimplus/BepInEx.cfg

[Logging.Console]
Enabled=true

All existing configuration in those files is retained and a backup of the old config is created as e.g. /config/valheimplus/valheim_plus.cfg.old before writing the new config file.

You could generate your own custom plugin config from environment variables using the POST_BEPINEX_CONFIG_HOOK event hook and env2cfg.

System requirements

On our system while idle with no players connected Valheim server consumes around 2.8 GB RSS. All the while using around 30% of one CPU Core on a 2.40 GHz Intel Xeon E5-2620 v3. Valheim server is making use of many threads with two of them seemingly doing the bulk of the work each responsible for around 8-10% of the 30% of idle load.

The picture changes when players connect. The first player increased overall load to 42%, the second player to 53%. In the thread view we see that a thread that was previously consuming 10% is now hovering around 38%. Meaning while Valheim server creates 50 threads on our system it looks like there is a single thread doing the bulk of all work (~70%) with no way for the Kernel to distribute the load to many cores.

Therefore our minimum requirements would be a dual core system with 4 GB of RAM and our recommended system would be a high clocked 4 core server with 8 GB of RAM. A few very high clocked cores will be more beneficial than having many cores. I.e. two 5 GHz cores will yield better performance than six 2 GHz cores. This holds especially true the more players are connected to the system.

Deployment

Deploying with Docker and systemd

Create a config file /etc/sysconfig/valheim-server

SERVER_NAME=My Server
SERVER_PORT=2456
WORLD_NAME=Dedicated
SERVER_PASS=secret
SERVER_PUBLIC=true

Then enable the Docker container on system boot

$ sudo mkdir -p /etc/valheim /opt/valheim
$ sudo curl -o /etc/systemd/system/valheim.service https://raw.githubusercontent.com/lloesche/valheim-server-docker/main/valheim.service
$ sudo systemctl daemon-reload
$ sudo systemctl enable valheim.service
$ sudo systemctl start valheim.service

Deploying with docker compose

Copy and paste the following into your shell

mkdir -p $HOME/valheim-server/config $HOME/valheim-server/data
cd $HOME/valheim-server/
cat > $HOME/valheim-server/valheim.env << EOF
SERVER_NAME=My Server
WORLD_NAME=Dedicated
SERVER_PASS=secret
SERVER_PUBLIC=true
EOF
curl -o $HOME/valheim-server/docker-compose.yaml https://raw.githubusercontent.com/lloesche/valheim-server-docker/main/docker-compose.yaml
docker compose up -d

Deploying to Kubernetes

Kubernetes manifests using this container image, along with a helm chart, are available from the following repository: https://github.com/Addyvan/valheim-k8s

The chart is also available directly using:

helm repo add valheim-k8s https://addyvan.github.io/valheim-k8s/
helm repo update
helm install valheim-server valheim-k8s/valheim-k8s # see repo for full config

Deploying to AWS ECS

CDK Project for spinning up a Valheim game server on AWS Using ECS Fargate and Amazon EFS is available here: https://github.com/rileydakota/valheim-ecs-fargate-cdk

Deploying to Nomad

$ sudo mkdir -p /var/lib/valheim/{config,data}
$ sudo curl -o /var/lib/valheim/valheim.nomad https://raw.githubusercontent.com/lloesche/valheim-server-docker/main/valheim.nomad
$ sudo nomad job run /var/lib/valheim/valheim.nomad

Updates

By default the container will check for Valheim server updates every 15 minutes if no players are currently connected to the server. If an update is found it is downloaded and the server restarted. This update schedule can be changed using the UPDATE_CRON environment variable.

Backups

The container will on startup and periodically create a backup of the worlds_local/ directory.

The default is once per hour but can be changed using the BACKUPS_CRON environment variable.

Default backup directory is /config/backups/ within the container. A different directory can be set using the BACKUPS_DIRECTORY environment variable. It makes sense to have this directory be a volume mount from the host. Warning: do not make the backup directory a subfolder of /config/worlds_local/. Otherwise each backup will backup all previous backups.

By default 3 days worth of backups will be kept. A different number can be configured using BACKUPS_MAX_AGE. The value is in days.

It is possible to configure a maximum number of to-be-kept backup files with BACKUPS_MAX_COUNT. When going over this limit, the oldest file(s) will be deleted. The default is 0 which means no limit. Note that BACKUPS_MAX_AGE will always be respected: if backups get too old, they will be deleted even if BACKUPS_MAX_COUNT was not yet reached (or is 0).

Beware that backups are performed while the server is running. As such files might be in an open state when the backup runs. However the worlds_local/ directory also contains a .db.old file for each world which should always be closed and in a consistent state.

See Copy backups to another location for an example of how to copy backups offsite.

If BACKUPS_IF_IDLE=false then backups are only created if there has been recent player activity. Once the last player disconnects there is a grace period BACKUPS_IDLE_GRACE_PERIOD in seconds after which backups are still being created. The reason for this is that Valheim dedicated server only saves the world in 20 minute intervals and on shutdown. So to make sure that we have a consistent world file backup of the most recent changes we want to wait out one world save. This grace period also needs to be long enough so that our BACKUPS_CRON had a chance to run.

BACKUPS_ZIP=false can be used to store backups uncompressed in the backup directory. Please note that this will increase the filesize of the backups, due to no compression.

Manual backup

Sending SIGHUP to the valheim-backup service or restarting the service will create a backup. If BACKUPS_IF_IDLE=false sending SIGHUP only creates a backup if there has been recent player activity. Restarting valheim-backup will always create a backup.

The PID of the running service can be found in /var/run/valheim-backup.pid

Assuming your container's name is valheim-server here's how both would work:

Sending SIGHUP using supervisorctl

docker exec -it valheim-server supervisorctl signal HUP valheim-backup

Sending SIGHUP manually

docker exec -it valheim-server bash -c 'kill -HUP $(< /var/run/valheim-backup.pid)'

Restarting valheim-backup

docker exec -it valheim-server supervisorctl restart valheim-backup

The restart can also be done from the Supervisor web UI. Backup Step 1

Finding Your Server

Once the server is up and running and the log says something like

02/09/2021 10:42:24: Game server connected

it can still be challenging to actually find the server.

There are three ways of getting to your server. Either using the Steam server browser, adding the IP manually or using the in-game Community server list.

In-game

When in-game, click on Join Game and select Community. Wait for the game to load the list of all 4000+ servers. Only 200 servers will be shown at a time so we will have to enter part of our server name to filter the view. in-game server browser

Joining Directly via Hostname/IP

Valheim has since added the Join IP button to the Join Game tab. If you click the Join IP button, you are prompted to enter your server's IP address and port number. If you left the SERVER_PORT at its default value of 2456, you do not have to enter the port. The hostname or IP of your server will suffice. If you changed the port, you have to specify it like this: example.com:3333.

This method of connecting to your server will work even if your server is not public (i.e., you set SERVER_PUBLIC to false).

in-game server browser with join ip button join ip dialog

Steam Server Browser

When using the Steam server browser, in Steam go to View -> Servers. Click on CHANGE FILTERS and select Game Valheim. Wait for Steam to load all 4000+ Servers then sort the SERVERS column by clicking on its title. Scroll down until you find your server. Steam server browser From there you can right-click it and add as a favourite.

Note that in my tests when connecting to the server via the Steam server browser I had to enter the server password twice. Once in Steam and once in-game.

Steam Server Favorites & LAN Play

A third option within Steam is to add the server manually by IP. This also allows for LAN play without the need to open or forward any firewall ports.

Remark: LAN-Play is only available for Steam-Version without CrossPlay enabled! See official Valheim Dedicated Server Manual.pdf in the data/server folder.

Steps:

  1. Within Steam click on View -> Servers
  2. FAVORITES
  3. ADD SERVER
  4. Enter Server IP and port+1. So if the server is running on UDP port 2456 enter ip:2457
  5. FIND GAMES AT THIS ADDRESS...
  6. ADD SELECTED GAME SERVER TO FAV...

Add server manually

Do not use the ADD THIS ADDRESS TO FAVORITES button at this point.

NOTE: Sometimes I will get the following error when trying to connect to a LAN server: Steam Server Browser Error

In those cases it sometimes helped to add the server again, but this time using port 2456 and now pressing the ADD THIS ADDRESS TO FAVORITES button. It will not generate a new entry in the favourites list but seemingly just update the existing one that was originally discovered on port 2457.

Sometimes it also helps to press the REFRESH button and then immediately double click on the Server.

Overall LAN play via the Steam Server Browser has been a bit hit and miss for me while online play using the in-game search has resulted in the most consistent success.

NOTE 2: You will only find your Valheim game server using this method if your server is public (SERVER_PUBLIC is NOT set to false). If you started your server with SERVER_PUBLIC set to false, you will get the error message: Server is not responding. in the list where the servers are supposed to appear.

Admin Commands

Upon startup the server will create a file /config/adminlist.txt. In it you can list the IDs of all administrator users.

The ID of a user can be gotten either in-game by pressing F2 User ID in-game

or in the server logs when a user connects. User ID in logs

Administrators can press F5 to open the in-game console and use commands like ban and kick. Kick a user

Enable Admin Console

In recent versions of Valheim the game client has to be started with the -console flag for F5 to work. Enable Admin Console

Supervisor

This container uses a process supervisor aptly named supervisor. Within the container processes can be started and restarted using the command supervisorctl. For instance supervisorctl restart valheim-server would restart the server.

Supervisor provides a very simple http interface which can be optionally turned on by supplying SUPERVISOR_HTTP=true and a password in SUPERVISOR_HTTP_PASS. The default SUPERVISOR_HTTP_USER is admin but can be changed to anything else. Once activated the http server will listen on tcp port 9001 which has to be exposed (-p 9001:9001/tcp).

Supervisor

Supervisor API

If Supervisor's http server is enabled it also provides an XML-RPC API at /RPC2. Details can be found in the official documentation.

Status web server

If STATUS_HTTP is set to true the status web server will be started. By default it runs on container port 80 but can be customized using STATUS_HTTP_PORT.

This only works for public Valheim servers (SERVER_PUBLIC=true) because private ones do not answer to Steam server queries.

A /status.json will be updated every 10 seconds.

Whenever Valheim server is not yet running the status will contain an error like

{
  "last_status_update": "2021-03-07T21:42:46.307232+00:00",
  "error": "timeout('timed out')"
}

The error is just a string representation of whatever Python exception was thrown when trying to connect to the query port (2457/udp by default).

Once the server is running and listening on its UDP ports /status.json will contain something like this

{
  "last_status_update": "2021-03-07T21:42:16.076662+00:00",
  "error": null,
  "server_name": "My Docker based server",
  "server_type": "d",
  "platform": "l",
  "player_count": 1,
  "password_protected": true,
  "vac_enabled": false,
  "port": 2456,
  "steam_id": 90143789459088380,
  "keywords": "[email protected]",
  "game_id": 892970,
  "players": [
    {
      "name": "",
      "score": 0,
      "duration": 7.000421047210693
    }
  ]
}

All the information in status.json is fetched from Valheim servers public query port. You will notice that some of the fields like player name or player score currently contain no information. However for completeness the entire query response is left intact.

Within the container status.json is written to STATUS_HTTP_HTDOCS which by default is /opt/valheim/htdocs. It can either be consumed directly or the user can add their own html/css/js to this directory to read the json data and present it in whichever style they prefer. A file named index.html will be shown on / if it exists.

As mentioned all the information is publicly available on the Valheim server query port. However the option is there to configure a STATUS_HTTP_CONF (/config/httpd.conf by default) containing busybox httpd config to limit access to the status web server by IP/subnet or login/password.

Modding

Remark: Some Mods are using RPC commands, which needs gameport+2 for communication (e.g. if you're using gamport 2456, you have to open port 2458 too for the network: 2456-2458:2456-2458/udp) and in your firewall rules (if defined).

BepInExPack Valheim

Enable with

Variable Value
BEPINEX true

BepInExPack Valheim packages BepInEx for Valheim. BepInEx is a plugin / modding framework for Unity Mono, IL2CPP and .NET framework games. To enable BepInExPack provide the env variable BEPINEX=true. This can not be specified together with VALHEIM_PLUS=true. Just like Valheim Server this mod is automatically updated using the UPDATE_CRON schedule.

Upon first start BepInExPack will create a new directory /config/bepinex where its config files are located. BepInEx plugins must be copied into the /config/bepinex/plugins/ directory. From there they will be automatically copied into /opt/valheim/bepinex/BepInEx/plugins/ on install/update.

Configuration

See Mod config from Environment Variables

ValheimPlus

Enable with

Variable Value
VALHEIM_PLUS true

ValheimPlus is a popular Valheim mod based on BepInEx. It has been incorporated into this container. To enable V+ provide the env variable VALHEIM_PLUS=true. This can not be specified together with BEPINEX=true. Upon first start V+ will create a new directory /config/valheimplus where its config files are located. As a user you are mainly concerned with the values in /config/valheimplus/valheim_plus.cfg. For most modifications the mod has to be installed both, on the server as well as all the clients that connect to the server. A few modifications, like for example changing the dataRate can be done server only.

Updates

ValheimPlus is automatically being updated using the same UPDATE_CRON schedule the Valheim server uses to check for updates. If an update of either Valheim server or ValheimPlus is found it is being downloaded, configured and the server automatically restarted. This also means your clients always need to run the latest ValheimPlus version or will not be able to connect. If this is undesired the schedule could be changed to only check for updates once per day. Example UPDATE_CRON='0 6 * * *' would only check at 6 AM.

Configuration

See Mod config from Environment Variables

Disable server password

Another popular mod for LAN play that does not require the clients to run ValheimPlus is to turn off password authentication.

To do so enable ValheimPlus (VALHEIM_PLUS=true), set an empty password (SERVER_PASS=""), make the server non-public (SERVER_PUBLIC=false) and configure the following section in /config/valheimplus/valheim_plus.cfg

[Server]
enabled=true
enforceMod=false
disableServerPassword=true

Alternatively start with -e VPCFG_Server_enabled=true -e VPCFG_Server_enforceMod=false -e VPCFG_Server_disableServerPassword=true.

Ensure that the server can not be accessed from the public Internet. If you like to have the LAN experience but over the Internet I can highly recommend ZeroTier. It is an open source VPN service where you can create a virtual network switch that you and your friends can join. It is like Hamachi but free and open source. They do have a paid product for Businesses with more than 50 users. So for more than 50 users you could either get their Business product or alternatively would have to host the VPN controller yourself.

Changing startup CMD in Portainer

Portainer retains the startup CMD from the first time the container ist deployed. This is also true if the container is updated using "Recreate" in combination with "Pull latest image".

Recent changes made it so that the startup CMD of the image was changed. To avoid recreating the container from scratch you can use the "Duplicate/Edit" function of Portainer by following the instructions outlined below.

Portainer Step 1

Stop the old container (1) and edit the name (2)

Portainer Step 2

Append _old or similar to the name (3) save the change (4) and click "Duplicate/Edit" (5)

Portainer Step 3

Change the name back to original name (2) (3) (4).

Unter Advanced container settings override (6) the command and enter /usr/local/sbin/bootstrap (7)

Make sure "Always pull the image" is enabled.

click "Deploy the container" to finish.

If your server starts and is working delete the old unused image and the old container.

Synology Help

First install

This is not an extensive tutorial, but I hope these screenshots can be helpful. Beware that the server can use multiple GB of RAM and produces a lot of CPU load.

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8

Updating the container image to the latest version

The process of updating the image clears all data stored inside the container. So before doing a container image upgrade, make absolutely sure that /config, which contains your world, is an external volume stored on your NAS (Step 4 of the First install process). It is also a good idea to copy the latest version of the world backup to another location, like your PC. Update Step 1 Update Step 2 Update Step 3 Update Step 4 Update Step 5 Update Step 6

Error after download of new container image

If you are getting the following error after an Update: Error Step 1

Error Step 2

"Failure: OCI runtime create failed: container_linux.go:367: [...]"

You will need to remove the container completely and perform the First install steps again. Error Step 3

Make sure to use the same folder settings as before so the existing /config and /opt/valheim directories are used.

The error is caused by Synology using the old image's CMD with the newly downloaded image. By removing the container and recreating it we're forcing Synology to use the new images CMD.

QNAP NAS Help

Creating container

As a prerequisite you need to create a folder where you will keep your saves, backups and configuration.

Here is an example docker-compose.yaml file that we will use in the next steps.

services:
  valheim:
    image: lloesche/valheim-server
    cap_add:
      - sys_nice
    volumes:
      - /share/CACHEDEV1_DATA/{path_to_folder}/config:/config
      - /share/CACHEDEV1_DATA/{path_to_folder}/data:/opt/valheim
    ports:
      - "2456-2457:2456-2457/udp"
      - "9001:9001/tcp"
    env_file:
      - /share/CACHEDEV1_DATA/{path_to_folder}/valheim.env
    restart: always
    stop_grace_period: 2m
    deploy:
      resources:
        limits:
          cpus: '0.70'
          memory: 4gb

The most important part is /share/CACHEDEV1_DATA/{path_to_folder}/config. You need to replace {path_to_folder} with the folder path where you want to store data and configuration for your Valheim server.

Change your memory and cpu limit according to your available resources on QNAP. Current settings are 70% of single CPU and 4gb of RAM.

In this folder you need to create a file valheim.env to store configuration variables.

Example valheim.env:

SERVER_NAME=My Server
WORLD_NAME=Dedicated
SERVER_PASS=secret
SERVER_PUBLIC=true

Qnap Step 1

Qnap Step 2

Qnap Step 3

Updating image

Qnap update Step 1

Qnap update Step 2

In the image name you have to specify the image from the container definition lloesche/valheim-server.

Qnap update Step 3

After the image is downloaded restart the container. As you can see the old image is now unused and the new one is in use by the container. You can now safely delete the old image.

Qnap update Step 4

QNAP ZFS issue

We have had a report from a QNAP user where Steam failed when using ZFS as the backing filesystem with the following error

valheim-updater [ 0%] !!! Fatal Error: Steamcmd needs 250MB of free disk space to update.
valheim-updater src/tier0/threadtools.cpp (3553) : Assertion Failed: Illegal termination of worker thread 'Thread(0x0x58a1d8f0/0x0xf7780b'

This appears to be due to a bad Steam/ZFS interaction akin to this Steam bug where very large ZFS volumes get interpreted as very small due to bad overflow handling. There are two workarounds available. Use a non-ZFS volume, or set a quota on the volume, e.g.:

  1. Connect to the QNAP SSH console.
  2. Get the ZFS volume ID from within the container
df /opt/valheim | tail -n 1 | awk '{ print $1 }'
  1. Set the quota to 2TB or less from the QNAP SSH console:
zfs set quota=1TB "volume_id_here"

You could also try this one-liner from the SSH console:

CONTAINER="your_valheim_container name/id" \
  docker exec -t "$CONTAINER" df /opt/valheim | tail -n 1 | awk '{ print $1 }' | \
  xargs -I zfs_id sudo zfs set quota=1TB zfs_id

If you have access to a QNAP NAS running ZFS and can reproduce/debug this issue further, please open a new issue with your findings so we can update this section and provide more information here.

OpenMediaVault Help

Permission denied error

If you are running this container in Portainer on a OpenMediaVault NAS and getting the following error

valheim-server /usr/local/bin/valheim-server: line 110: /opt/valheim/server/valheim_server.x86_64: Permission denied

the cause is that the container's filesystem is mounted with the noexec flag. Meaning no files are allowed to be executed on that filesystem.

See this page for detailed information on how to disable noexec for newly created and existing filesystems.

For existing filesystems edit /etc/openmediavault/config.xml and remove the noexec option from the filesystem in question. The file should look something like this

OMV 1

License

Copyright 2021 Lukas Lösche

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Legal disclaimer

This Docker container is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Iron Gate Studio.
Valheim, Valheim dedicated server and the Valheim Logo are © 2021 Iron Gate Studio.