feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 #149

renovate · 2023-06-09T05:27:50Z

This PR contains the following updates:

Package	Update	Change
ghcr.io/onedr0p/home-assistant (source)	minor	`2023.6.0` -> `2023.12.4`

Warning

Some dependencies could not be looked up. Check the Dependency Dashboard for more information.

Release Notes

home-assistant/core (ghcr.io/onedr0p/home-assistant)

`v2023.12.4`

Compare Source

Pass timeout to httpx in RESTful Switch (@vexofp - #105364) (rest docs)
Add Raspberry Pi 5 specific container image (@agners - #105488)
Set todo item status in intent (@synesthesiam - #105743) (todo docs)
Bump aioairzone to v0.7.0 (@Noltari - #105807) (airzone docs) (dependency)
Update aioairzone to v0.7.2 (@Noltari - #105811) (airzone docs) (dependency)
Fix HVAC mode duplication for Shelly Gen2 climate platform (@bieniu - #105812) (shelly docs)
Fix Airzone temperature range on new climate card (@Noltari - #105830) (airzone docs)
Bump pyunifiprotect to 4.22.3 (@bdraco - #105833) (unifiprotect docs) (dependency)
Address late review comments on AVM FRITZ!SmartHome (@mib1185 - #105860) (fritzbox docs)
Set WiFi QR code entity to unknown when Fritzbox is not available (@mib1185 - #105870) (fritz docs)
Bump reolink_aio to 0.8.3 (@starkillerOG - #105489) (reolink docs) (dependency)
Bump reolink_aio to 0.8.4 (@starkillerOG - #105946) (reolink docs) (dependency)
Bump motionblinds to 0.6.19 (@starkillerOG - #105951) (motion_blinds docs) (dependency)
Fix unreachable Netatmo sensor returning false values (@cgtobi - #105954) (netatmo docs)
Add Raspberry Pi 5 to version and hardware integration (@agners - #105992) (hassio docs) (version docs) (raspberry_pi docs)
Bump blinkpy 0.22.4 (@mkmer - #105993) (blink docs)
Don't fetch unchanged OurGroceries lists (@OnFreund - #105998) (ourgroceries docs)
Bump pyatmo to 8.0.1 (@cgtobi - #106094) (netatmo docs)
Bump surepy to 0.9.0 (@benleb - #106101) (surepetcare docs) (dependency)
Bump pyenphase to 1.15.2 (@bdraco - #106134) (enphase_envoy docs) (dependency)
Bump ZHA dependencies (@puddly - #106147) (zha docs) (dependency)
Bump life360 to 6.0.1 (@pnbruckner - #106149) (life360 docs)
Fix bug with non-existent Notion bridge IDs (@bachya - #106152) (notion docs)
Fix Netatmo light switching states by assuming state until next update (@cgtobi - #106162) (netatmo docs)
Bump Devialet to 1.4.4 (@fwestenberg - #106171) (devialet docs)
Bump ring-doorbell to 0.8.5 (@sdb9696 - #106178) (ring docs) (dependency)
Bump Devialet to 1.4.5 (@fwestenberg - #106184) (devialet docs)
Bump aiopulse to 0.4.4 (@atmurray - #106239) (acmeda docs) (dependency)
Fix Shelly consumption_types (@emontnemery - #106273) (shelly docs)
Missing exception on relogin in Honeywell (@mkmer - #106324) (honeywell docs)
Redact unique id from diagnostics in blink (@mkmer - #106413) (blink docs)

`v2023.12.3`

Compare Source

Ensure platform setup for all AVM FRITZ!SmartHome devices (@mib1185 - #105515) (fritzbox docs)
Update AEMET-OpenData to v0.4.7 (@Noltari - #105676) (aemet docs) (dependency)
Fix restoring UniFi clients with old unique id (@Kane610 - #105691) (unifi docs)
Bump zeroconf to 0.128.5 (@bdraco - #105694) (zeroconf docs) (dependency)
Add missing rest_command reload service to services.yaml (@jpbede - #105714) (rest_command docs)
Fix issue clearing renault schedules (@epenet - #105719) (renault docs) (dependency)
Fix Fully Kiosk Browser MQTT event callbacks with non-standard event topics (@cgarwood - #105735) (fully_kiosk docs)
Disable user profiles on login screen (@frenck - #105749) (auth docs) (person docs) (breaking-change)

`v2023.12.2`

Compare Source

Fix Lyric LCC thermostats auto mode (@apt-itude - #104853) (lyric docs)
Bump zeroconf to 0.128.0 (@bdraco - #104936) (zeroconf docs) (dependency)
Fix CI test_invalid_rrule_fix test by freezing the time (@jbouwh - #105294) (google docs)
Add missing configuration for services.yaml in blink (@mkmer - #105310) (blink docs)
Bump pyschlage to 2023.12.0 (@dknowles2 - #105349) (schlage docs) (dependency)
Fix preset modes error in Smartthings (@gjohansson-ST - #105375) (smartthings docs)
Fix service missing key in Blink (@mkmer - #105387) (blink docs)
Fix adding/updating todo items with due date in CalDAV integration (@DerFlob - #105435) (caldav docs)
Check if heat area exists when setting up valve opening and battery sensors in moehlenhoff alpha2 (@j-a-n - #105437) (moehlenhoff_alpha2 docs)
Bump hatasmota to 0.8.0 (@emontnemery - #105440) (tasmota docs)
Bump plugwise to v0.35.3 (@bouwew - #105442) (plugwise docs) (dependency)
Fix alexa calling not featured cover services (@jbouwh - #105444) (alexa docs)
Fix fitbit oauth reauth debug logging (@allenporter - #105450) (fitbit docs)
Write Enphase Envoy data to log when in debug mode (@catsmanac - #105456) (enphase_envoy docs)
Bump ical to 6.1.1 (@allenporter - #105462) (local_calendar docs) (local_todo docs) (dependency)
Bump zeroconf to 0.128.4 (@bdraco - #105465) (zeroconf docs) (dependency)
Remove Aftership import issue when entry already exists (@joostlek - #105476) (aftership docs)
Disconnect before reconnecting to satellite (@synesthesiam - #105500) (wyoming docs)
Bump caldav to 1.3.8 (@FrnchFrgg - #105508) (caldav docs)
Bump pyhiveapi to v0.5.16 (@KJonline - #105513) (hive docs) (dependency)
Fix setup Fast.com (@gjohansson-ST - #105580) (fastdotcom docs)
Add name slot to HassClimateGetTemperature intent (@synesthesiam - #105585) (climate docs)
Skip TTS events entirely with empty text (@synesthesiam - #105617) (assist_pipeline docs)
Rename "satellite enabled" to "mute" (@synesthesiam - #105619) (wyoming docs)
Fix timing issue in Withings (@joostlek - #105203) (withings docs)
Update pylint to 3.0.3 (@cdce8p - #105491) (mqtt docs) (zha docs) (improv_ble docs) (dependency)
Reload ZHA integration on any error, not just recoverable ones (@puddly - #105659) (zha docs)
Bump ZHA dependencies (@puddly - #105661) (zha docs) (dependency)

`v2023.12.1`

Compare Source

Initialize energy_state without price (@Excentyl - #97031) (energy docs)
Bump yolink-api to 0.3.4 (@matrixd2 - #105124) (yolink docs) (dependency)
Bump apple_weatherkit to 1.1.2 (@tjhorner - #105140) (weatherkit docs) (dependency)
Correct smtp error message string (@jbouwh - #105148) (smtp docs)
Expose todo entities to Assist by default (@synesthesiam - #105150) (homeassistant docs)
Disable scenarios (scenes) for local API in Overkiz (@iMicknl - #105153) (overkiz docs)
Improve LIDL christmas light detection in deCONZ (@Kane610 - #105155) (deconz docs)
Bump reolink_aio to 0.8.2 (@starkillerOG - #105157) (reolink docs) (dependency)
Don't return TTS URL in Assist pipeline (@synesthesiam - #105164) (assist_pipeline docs)
Bump Météo-France to 1.3.0 (@Quentame - #105170) (meteo_france docs) (dependency)
Fix ZHA quirk ID custom entities matching all devices (@TheJulianJES - #105184) (zha docs)
Fix missing apostrophe in smtp (@lunmay - #105189) (smtp docs)
Set ping interval to 15 seconds instead of 5 minutes (@nohn - #105191) (ping docs)
Increase ping update interval to 30 seconds (@jpbede - #105199) (ping docs)
Fix bug in roon incremental volume control. (@pavoni - #105201) (roon docs)
fix supportedFanOscillationModes is null (@haimn - #105205) (smartthings docs)
Disable config flow progress in peco config flow (@emontnemery - #105222) (peco docs)
Fix Fritzbox light setup (@flabbamann - #105232) (fritzbox docs)
Fix check_date service in workday (@gjohansson-ST - #105241) (workday docs)
Fix AsusWrt invalid data type with tuple type (@ollo69 - #105247) (asuswrt docs)
Explicit check for None in Discovergy entity if condition (@jpbede - #105248) (discovergy docs)
Add migration for old HomeWizard sensors (@DCSBL - #105251) (homewizard docs)
Fix update of uncategorized OurGroceries items (@OnFreund - #105255) (ourgroceries docs)
Bump pyunifiprotect to 4.22.0 (@bdraco - #105265) (unifiprotect docs) (dependency)
Set device id and forward errors to Wyoming satellites (@synesthesiam - #105266) (wyoming docs)
Fix mqtt json light state updates using deprecated color handling (@jbouwh - #105283) (mqtt docs)
Always set _attr_current_option in Nobø Hub select entities (@oyvindwe - #105289) (nobo_hub docs)
Update frontend to 2023120.2 (@piitaya - #105299) (frontend docs)
Add test for energy cost sensor for late price sensor (@emontnemery - #105312) (energy docs)
Use area id for context instead of name (@synesthesiam - #105313) (conversation docs)
Add workaround for orjson not handling subclasses of str (@emontnemery - #105314)
Add rollback on exception that needs rollback in SQL (@gjohansson-ST - #104948) (sql docs)
Workaround to_json template filter in parsing dict key (@jbouwh - #105327)
Bump plugwise to v0.34.5 (@bouwew - #105330) (plugwise docs) (dependency)

`v2023.12.0`

Compare Source

https://www.home-assistant.io/blog/2023/12/06/release-202312/

`v2023.11.3`

Compare Source

Bump accuweather to version 2.0.1 (@bieniu - #103532) (accuweather docs) (dependency)
Remove rainbird yaml config test fixtures (@allenporter - #103607) (rainbird docs)
Lock Withings token refresh (@joostlek - #103688) (withings docs)
Bump accuweather to version 2.1.0 (@bieniu - #103744) (accuweather docs) (dependency)
Bump python-matter-server to 4.0.2 (@bdraco - #103760) (matter docs) (dependency)
Bump subarulink to 0.7.9 (@G-Two - #103761) (subaru docs) (dependency)
Fix discovery schema for Matter switches (@marcelveldt - #103762) (matter docs)
Fix raising vol.Invalid during mqtt config validation instead of ValueError (@jbouwh - #103764) (mqtt docs)
Fix race condition in Matter unsubscribe method (@marcelveldt - #103770) (matter docs)
Fix typo in calendar translation (@jrieger - #103789) (calendar docs)
Fix Rainbird unique to use a more reliable source (mac address) (@allenporter - #101603) (rainbird docs)
Bump pyOverkiz to 1.13.0 (@iMicknl - #103582) (overkiz docs) (dependency)
Bump pyOverkiz to 1.13.2 (@iMicknl - #103790) (overkiz docs) (dependency)
Bump aiocomelit to 0.5.2 (@chemelli74 - #103791) (comelit docs) (dependency)
Bump velbusaio to 2023.11.0 (@Cereal2nd - #103798) (velbus docs) (dependency)
Bump pyunifiprotect to 4.21.0 (@bdraco - #103832) (unifiprotect docs) (dependency)
Bump lupupy to 0.3.1 (@suaveolent - #103835) (lupusec docs) (dependency)
Bump gcal_sync to 6.0.1 (@allenporter - #103861) (google docs) (dependency)
Fix bug in Fitbit config flow, and switch to prefer display name (@allenporter - #103869) (fitbit docs)
Fix for Google Calendar API returning invalid RRULE:DATE rules (@allenporter - #103870) (google docs)
Update Fitbit to avoid a KeyError when restingHeartRate is not present (@allenporter - #103872) (fitbit docs)
fix Comelit cover stop (@chemelli74 - #103911) (comelit docs)
Fix Coinbase for new API Structure (@TomBrien - #103930) (coinbase docs)
Bump zwave-js-server-python to 0.54.0 (@raman325 - #103943) (zwave_js docs) (dependency)
Update smarttub to 0.0.36 (@mdz - #103948) (smarttub docs)
Fix duplicate Ban file entries (@fosterchuck - #103953) (http docs)
Fix openexchangerates form data description (@MartinHjelmare - #103974) (openexchangerates docs)
Fix emulated_hue with None values (@bdraco - #104020) (emulated_hue docs)
Fix netatmo authentication when using cloud authentication credentials (@deosrc - #104021) (netatmo docs)
Fix device tracker see gps accuracy selector (@MartinHjelmare - #104022) (device_tracker docs)
Bump pyenphase to 1.14.3 (@catsmanac - #104101) (enphase_envoy docs) (dependency)
Fix ESPHome BLE client raising confusing error when not connected (@bdraco - #104146) (esphome docs)
Fix memory leak in ESPHome disconnect callbacks (@bdraco - #104149) (esphome docs)
Add debug logging for which adapter is used to connect bluetooth devices (@bdraco - #103264) (bluetooth docs)
Prevent Bluetooth reconnects from blocking shutdown (@bdraco - #104150) (bluetooth docs)
Bump boschshcpy to 0.2.75 (@tschamm - #104159) (bosch_shc docs)
Fix Local To-do list bug renaming items (@allenporter - #104182) (local_todo docs)
Bump aiosomecomfort to 0.0.22 (@mkmer - #104202) (honeywell docs)
Increase Tomato request timeout (@ertechdesign - #104203) (tomato docs)
Fix imap does not decode text body correctly (@jbouwh - #104217) (imap docs)
Fix mqtt json light allows to set brightness value >255 (@jbouwh - #104220) (mqtt docs)
Handle attributes set to None in prometheus (@knyar - #104247) (prometheus docs)
Catch ClientOSError in renault integration (@epenet - #104248) (renault docs)
Restore removed guard for non-string inputs in Alexa (@jbouwh - #104263) (alexa docs)
Bump bimmer_connected to 0.14.3 (@rikroe - #104282) (bmw_connected_drive docs) (dependency)
Bump pyrainbird to 4.0.1 (@allenporter - #104293) (rainbird docs) (dependency)
Bump pychromecast to 13.0.8 (@emontnemery - #104320) (cast docs)
Bump ical to 6.0.0 (@allenporter - #103482) (local_calendar docs) (local_todo docs) (dependency)
Bump ical to 6.1.0 (@allenporter - #103759) (local_calendar docs) (local_todo docs) (dependency)

`v2023.11.2`

Compare Source

Don't assume that the sleep value is a dictionary in Tractive integration (@bieniu - #103138) (tractive docs)
Update aioairzone-cloud to v0.3.2 (@Noltari - #103258) (airzone_cloud docs) (dependency)
Update aioairzone-cloud to v0.3.5 (@Noltari - #103315) (airzone_cloud docs) (dependency)
Handle null data in WeatherFlow sensors (@natekspencer - #103349) (weatherflow docs)
Handle smarttub sensor values being None (@mdz - #103385) (smarttub docs) (dependency)
Pin jaraco.functools to fix builds and CI (@bdraco - #103406) (abode docs) (dependency)
Update tailscale to 0.6.0 (@frenck - #103409) (tailscale docs) (dependency)
Bump pyatmo to v7.6.0 (@cgtobi - #103410) (netatmo docs)
Fix serial in Flo device information (@mib1185 - #103427) (flo docs)
modbus Allow swap: byte for datatype: string. (@janiversen - #103441) (modbus docs)
Modbus set device_class in slaves (@janiversen - #103442) (modbus docs)
Fix KNX expose default value when attribute is None (@farmio - #103446) (knx docs)
Sort Withings sleep data on end date (@joostlek - #103454) (withings docs)
Use right equipment identifier in DSMR setup (@dupondje - #103494) (dsmr docs)
Fix litterrobot test failure due to time zone dependence (@mdz - #103444) (litterrobot docs)
Revert binary_sensor part of #103210 (@edenhaus - #103499) (mqtt docs)
ESPHome: Add suggested_area from device info (@jesserockz - #102834) (esphome docs)
Bump aioesphomeapi to 18.2.1 (@bdraco - #103156) (esphome docs) (dependency)
Bump bluetooth-data-tools to 0.14.0 (@bdraco - #103413) (esphome docs) (bluetooth docs) (led_ble docs) (ld2410_ble docs) (private_ble_device docs) (dependency)
Bump blinkpy to 0.22.3 (@mkmer - #103438) (blink docs) (dependency)
Fix 5B Gas meter in dsmr (@dupondje - #103506) (dsmr docs)
Fix invalid MAC in samsungtv (@epenet - #103512) (samsungtv docs)
Bump aioesphomeapi to 18.2.4 (@bdraco - #103552) (esphome docs) (dependency)
Bump pyenphase to 1.14.2 (@cgarwood - #103553) (enphase_envoy docs) (dependency)
Update dsmr-parser to 1.3.1 to fix parsing issues (@dupondje - #103572) (dsmr docs) (dependency)
fix: get_devices only checks for the first type (@suaveolent - #103583) (lupusec docs)
Raise exception when data can't be fetched in Opensky (@joostlek - #103596) (opensky docs)
Bump yt-dlp to 2023.10.13 (@joostlek - #103616) (media_extractor docs) (dependency)
Fix Reolink DHCP IP update (@starkillerOG - #103654) (reolink docs)
Incease tplink setup timeout (@bdraco - #103671) (tplink docs)
Add name to Withings coordinator (@joostlek - #103692) (withings docs)
Update frontend to 2023103.2 (@bramkragten - #103706) (frontend docs)

`v2023.11.1`

Compare Source

Bump python-holidays to 0.35 (@gjohansson-ST - #103092) (workday docs) (dependency)
Bump aiowaqi to 3.0.0 (@joostlek - #103166) ([waqi docs]) (dependency)
Catch unexpected response in Honeywell (@mkmer - #103169) (honeywell docs)
Fix roomba translation key mismatch ([@Xitee1] - #103191) ([roomba docs])
Fix roomba error if battery stats are not available ([@Xitee1] - #103196) ([roomba docs])
Fix mqtt config validation error handling (@jbouwh - #103210) (mqtt docs)
Fix Fronius entity initialisation (@farmio - #103211) ([fronius docs])
Bump pyenphase to 1.14.1 (@cgarwood - #103239) (enphase_envoy docs)
Remove measurement flag from timestamp in gardena bluetooth ([@elupus] - #103245) ([gardena_bluetooth docs])
Fix Plugwise Schedule selection ([@CoMPaTech] - [#103262]) (plugwise docs)
Bump yalexs-ble to 2.3.2 (@bdraco - [#103267]) ([august docs]) ([yalexs_ble docs]) (dependency)
add library logger info on ecoforest integration manifest ([@pjanuario] - [#103274]) ([ecoforest docs])
Fix Matter 1.2 locks with specific unlatch/unbolt support (@marcelveldt - [#103275]) (matter docs)
Fix firmware update failure (@raman325 - [#103277]) (zwave_js docs)
Bump opower to 0.0.39 ([@tronikos] - [#103292]) ([opower docs]) (dependency)
Bump reolink-aio to 0.7.14 and improve typing of Reolink (@starkillerOG - #103129) (reolink docs)
Bump py_nextbusnext to v1.0.2 to fix TypeError ([@ViViDboarder] - #103214) ([nextbus docs]) (dependency)
Add script to convert zwave_js device diagnostics to fixture (@raman325 - #102799) (zwave_js docs)
Fix typo in Todoist config flow (@jpbede - [#103317]) ([todoist docs])
Remove extra from traccar webhook ([@ludeeus] - [#103319]) ([traccar docs])
Report correct weather condition at night for Met (@jrieger - [#103334]) ([met docs])
Handle UniFi traffic rules not supported on older versions (@Kane610 - [#103346]) (unifi docs)
Fix sensor unique id in Islamic prayer times ([@engrbm87] - [#103356]) ([islamic_prayer_times docs])
Fix zwave_js cover bug for Window Covering CC values (@raman325 - [#103289]) (zwave_js docs)

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

….12.4

renovate bot added renovate/container type/patch labels Jun 9, 2023

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from db59661 to 682e606 Compare June 15, 2023 04:23

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.1~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2 Jun 15, 2023

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch 2 times, most recently from c52b4d0 to 0677abd Compare June 16, 2023 11:02

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2 - autoclosed Jun 24, 2023

renovate bot closed this Jun 24, 2023

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch June 24, 2023 01:44

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2 - autoclosed~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2 Jun 24, 2023

renovate bot reopened this Jun 24, 2023

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch June 24, 2023 03:50

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.2~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3 Jun 24, 2023

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch 2 times, most recently from 99c0afb to 01712ca Compare June 24, 2023 10:40

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3 - autoclosed Jul 5, 2023

renovate bot closed this Jul 5, 2023

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch July 5, 2023 17:47

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3 - autoclosed~~ fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3 Jul 5, 2023

renovate bot reopened this Jul 5, 2023

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch July 5, 2023 19:13

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch 2 times, most recently from 5701d5e to d8efeb5 Compare July 6, 2023 00:48

renovate bot changed the title ~~fix(container): update image ghcr.io/onedr0p/home-assistant to v2023.6.3~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.0 Jul 6, 2023

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.0~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.1 Jul 7, 2023

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from d8efeb5 to c744078 Compare July 7, 2023 00:35

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.1~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.1 - autoclosed Jul 7, 2023

renovate bot closed this Jul 7, 2023

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch July 7, 2023 23:13

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.1 - autoclosed~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.7.1 Jul 8, 2023

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from a546461 to 7b8a3b0 Compare January 1, 2024 19:56

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed Jan 16, 2024

renovate bot closed this Jan 16, 2024

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch January 16, 2024 10:57

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 Jan 16, 2024

renovate bot reopened this Jan 16, 2024

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch January 16, 2024 12:56

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from 7b8a3b0 to 9dbf1e8 Compare January 16, 2024 12:56

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed Jan 24, 2024

renovate bot closed this Jan 24, 2024

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch January 24, 2024 16:26

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 Jan 24, 2024

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch January 24, 2024 18:09

renovate bot reopened this Jan 24, 2024

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from 9dbf1e8 to c0b0156 Compare January 24, 2024 18:09

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed Feb 4, 2024

renovate bot closed this Feb 4, 2024

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch February 4, 2024 21:16

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 Feb 5, 2024

renovate bot reopened this Feb 5, 2024

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch February 5, 2024 01:36

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from c0b0156 to 65bd9eb Compare February 5, 2024 01:37

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed Feb 8, 2024

renovate bot closed this Feb 8, 2024

renovate bot deleted the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch February 8, 2024 00:14

renovate bot changed the title ~~feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 - autoclosed~~ feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 Feb 8, 2024

renovate bot reopened this Feb 8, 2024

renovate bot restored the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch February 8, 2024 03:38

feat(container): update image ghcr.io/onedr0p/home-assistant to v2023…

accb4f0

….12.4

renovate bot force-pushed the renovate/ghcr.io-onedr0p-home-assistant-2023.x branch from 65bd9eb to accb4f0 Compare February 8, 2024 03:38

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 #149

feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 #149

renovate bot commented Jun 9, 2023 •

edited

Loading

feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 #149

Are you sure you want to change the base?

feat(container): update image ghcr.io/onedr0p/home-assistant to v2023.12.4 #149

Conversation

renovate bot commented Jun 9, 2023 • edited Loading

Release Notes

Configuration

renovate bot commented Jun 9, 2023 •

edited

Loading