design doc for the externally-manage-pf support

Signed-off-by: Sebastian Sch <[email protected]>

doc/design/externally-manage-pf.md

@@ -0,0 +1,224 @@
+---
+title: Externally Manage PF
+authors:
+  - SchSeba
+reviewers:
+  - zeeke
+  - adrianchiris
+creation-date: 12-07-2023
+last-updated: 12-07-2023
+---
+
+# Externally Manage PF
+
+## Summary
+
+Allow the SR-IOV network operator to configure and allocate a subset of virtual functions from
+a physical function that is configured externally from SR-IOV network operator.
+
+## Motivation
+
+The feature is needed to allow the operator to only configure a subset of virtual functions.
+This allows a third party component like nmstate, kubernetes-nmstate, NetworkManager to handle the creation
+and the usage of the virtual functions on the system. Some of the examples are using the virtual function as the primary
+nic for the k8s SDN network or a storage network.
+
+Before this change the SR-IOV network operator is the only component that should use/configure VFs. not allowing the user
+to use some of the VFs for host networking.
+
+### Use Cases
+
+* As a user I want to use a virtual function for SDN network, for SDN the network need to be configured before
+k8s is deployed and these VFs should be available at system startup before pods start running
+* As a user I want to create the virtual functions via nmstate
+* As a user I want pods to use virtual functions from a pre-configured PF
+* As a user I want to allocate virtual functions to pods from a PF with custom configuration/driver
+* As a user I want to use virtual functions to be configured for the storage subsystem before k8s is deployed / pods spinning up at system startup
+
+### Goals
+
+* Allow the SR-IOV network operator to handle the configuration and pod allocation of some or all virtual functions
+while PF configuration are managed by an external entity
+* Allow the user to Allocate the number of virtual functions he wants for the system and the subset he wants for pods
+
+### Non-Goals
+
+* Supporting switchdev mode (may change in the future if there is a request)
+* Supporting the creation of the VFs on boot by the operator possible to use operator systemd mode for that
+
+## Proposal
+
+Create a sub-flow in the SR-IOV network operator where the user can request a configuration for all/subset of virtual functions
+without any changes in the PF level.
+
+The operator will first validate the requested PF contains the requested amount of virtual functions allocated, it
+will also validate the requested MTU is configured as expected on the PF.
+If that is not the case the `sriovNetworkNodeState.status.SyncStatus` field will be report a `Failed`
+
+Then the operator will configure the subset of virtual functions with the requested driver and will update the device plugin
+configmap with the expected information to create the relevant pools.
+
+Existing sriov network config daemon flow:
+1. Apply the `numOfVfs`
+2. Configure the MTU on the PF
+3. Copy the Administrative mac address from the VFs
+4. Bind the right driver for the VF
+5. restart sriov network device plugin
+
+Externally manage sriov network config daemon flow:
+1. Copy the Administrative mac address from the VFs
+2. Bind the right driver for the VF
+3. restart sriov network device plugin
+
+In both flows:
+* In case of Infiniband link type it will generate random node and port GUID for the interface.
+* In case of RDMA (both for ETH and IB) it will perform an unbind/bind of the VF driver to set RDMA Node/Port GUID.
+
+### Workflow Description
+
+The user will allocate the virtual functions on the system with any third party tool like nmstate, Kubnernetes-nmstate,
+systemd scripts, etc..
+
+The user must perform the sriov allocation/configuration before kubelet starts or more specifically
+before SR-IOV Network operator configuration daemon starts running on the node.
+
+Then the user will be able to create a policy telling the operator that the PF is externally managed by the user.
+
+If the user want to create the virtual functions after the SR-IOV Network config daemon is already running on the system he will need
+to disable the webhook. the policy will be on failed state until the virtual functions needed for the policy exist
+on the node. the SR-IOV Network config daemon will continue to reconcile until the virtual functions exists
+
+#### Policy Example:
+```yaml
+apiVersion: sriovnetwork.openshift.io/v1
+kind: SriovNetworkNodePolicy
+metadata:
+  name: sriov-nic-1
+  namespace: sriov-network-operator
+spec:
+  deviceType: netdevice
+  nicSelector:
+    pfNames: ["ens3f0#5-9"]
+  nodeSelector:
+    node-role.kubernetes.io/worker: ""
+  numVfs: 10
+  priority: 99
+  resourceName: sriov_nic_1
+  externallyManaged: true
+```
+
+The PF and VFs 0-4 are externally managed. 
+For example nmstate will create 10 vfs, but will only consume VF 0 and 4 in its configuration. Nmstate will also manage the MTU and other parameters of the PF.
+
+#### Another Policy Example:
+In this case we allocate all the virtual functions from the PF
+
+```yaml
+apiVersion: sriovnetwork.openshift.io/v1
+kind: SriovNetworkNodePolicy
+metadata:
+  name: sriov-nic-2
+  namespace: sriov-network-operator
+spec:
+  deviceType: netdevice
+  nicSelector:
+    pfNames: ["ens3f0"]
+  nodeSelector:
+    node-role.kubernetes.io/worker: ""
+  numVfs: 10
+  priority: 99
+  resourceName: sriov_nic_1
+  externallyManaged: true
+```
+
+The SR-IOV network operator will use all the 10 virtual functions created externally by the user.
+One if the main use cases for this is if the user want to do some custom configuration to the PF and VFs like loading
+out of tree drivers or other stuff that the operator doesn't support.
+
+#### Validation
+The SR-IOV network operator will do a validation webhook to check if the requested `numVfs` is equal to what the user allocate
+if not it will reject the policy creation.
+
+The SR-IOV network operator will do a validation webhook to check if the requested MTU is lower or equal to what exist on the PF 
+if not it will reject the policy creation.
+
+
+*Note:* Same validation will be done in the SR-IOV config-daemon container to cover cases where the user doesn't want to deploy"
+the webhook and to cover scale-up adding new nodes. If the verification failed in the policy apply stage
+the `sriovNetworkNodeState.status.SyncStatus` field will be report a `Failed` status and the error description will 
+get exposed in `sriovNetworkNodeState.status.LastSyncError`
+
+
+#### Configuration
+
+The SR-IOV network operator config daemon will reconcile on the SriovNetworkNodeState update and will follow the regular
+flow of virtual functions *SKIPPING* only the Virtual function allocation.
+
+The SR-IOV network operator will update the SR-IOV Network Device Plugin with the pool information
+
+Another change with the operator beavior is when we delete a policy with had `externallyManaged: true` the SR-IOV network operator
+will *NOT* reset the `numVfs`
+
+### API Extensions
+
+For SriovNetworkNodePolicy
+
+```golang
+// SriovNetworkNodePolicySpec defines the desired state of SriovNetworkNodePolicy
+type SriovNetworkNodePolicySpec struct {
+...
++ // don't create the virtual function only assign to the driver and allocated them to device plugin. Defaults to false.
++ ExternallyManaged bool `json:"externallyManaged,omitempty"`
+}
+```
+
+For SriovNetworkNodeState
+
+```golang
+type Interface struct {
+...
++ ExternallyManaged bool      `json:"externallyManaged,omitempty"`
+}
+```
+
+### Implementation Details/Notes/Constraints
+
+#### Webhook
+For the webhook we add more validations when the policy contains `ExternallyManaged: true`
+* `numVfs` in the policy equal is equal or lower the number of virtual functions on the system
+* `MTU` in the policy equals or lower the MTU we discover on the PF
+* `LinkType` in the policy equals the link type we discover on the PF
+
+#### Controller/Manager
+
+The changes in the manager for this feature are minimal we only copy the `ExternallyManaged` boolean from the policy
+to the generated `nodeState.Spec`
+
+#### Config Daemon
+
+This is where most of the changes for this feature are implemented.
+
+* do a validation same as on the webhook to check the PF have everything we need to apply the requested
+policy, by checking the `numVfs`, `MTU` and `LinkType`.
+* skip all the PF configuration like `numVfs`, `MTU` and `LinkType`. he will only perform the virtual function 
+driver binding, administrative mac allocation and MTU. 
+* in case of Infiniband link type it will generate random node and port GUID for the interface
+* in case of RDMA (both for ETH and IB) it will perform an unbind/bind of the VF driver to set RDMA Node/Port GUID.
+* reset the device plugin so kubelet will be able to discover the SR-IOV devices.
+
+*NOTE:* The config-daemon will also save on the node a cache (file) of the last applied policy. this is needed to be able and understand
+if we need to reset the PF configuration(`ExternallyManaged` was false) or not when policy is removed.
+
+### Upgrade & Downgrade considerations
+
+The feature supports both Upgrade and Downgrade as we are introducing a new field in the API.
+Downgrade will cause the operator to treat an externally managed PF as non externally managed and actually configure PF,
+this may cause conflicts in the system.
+
+### Test Plan
+
+* Should not allow to create a policy with externallyManaged true if there are no vfs configured
+* Should create a policy if the number of requested vfs is equal
+* Should create a policy if the number of requested vfs is equal and not delete them when the policy is removed
+* should reset the virtual functions if externallyCreated is false
+* should to configure a policy with externallyManaged true if there are no vfs configured with disabled webhook