Skip to content

Build for ARTIK10 Tizen

Hosung Kim edited this page Apr 17, 2018 · 2 revisions

1. Tizen on ARTIK10 cross-compile

Prerequisites

  • ARTIK10 with Tizen (https://wiki.tizen.org/wiki/Tizen_On_ARTIK)

  • Tizen Studio with Native app development CLI tools.
    This is required to get rootstrap for Tizen (set of native libraries).

  • arm-linux-gnueabi-gcc cross compiler (can be found in Tizen Studio / Native toolchain)
    Otherwise, you can install it on your PC.

sudo apt-get install gcc-arm-linux-gnueabi g++-arm-linux-gnueabi

Building

  1. Make sure arm-linux-gnueabi-gcc is in path.
  2. Locate Tizen SDK. Default location is: ~/tizen-studio.
  3. In platforms/tizen-3.0/mobile there should be compatible rootstrap (eg. mobile-3.0-device)

Compile:

  • Compile with rootstrap in case you use tizen 3.0 libraries.
tools/build.py \
  --target-arch=arm --target-os=tizen --target-board=artik10 \
  --compile-flag="--sysroot=~/tizen-studio/platforms/tizen-3.0/mobile/rootstraps/mobile-3.0-device.core/"

Testing

Transfer iotjs binary and test file to the device:

 $ sdb push ./build/arm-tizen/debug/bin/iotjs /home/owner/iotjs/
 $ sdb push ./test/run_pass/test_console.js /home/owner/iotjs/

Run the test:

sdb shell
$ cd /home/owner/iotjs
$ ./iotjs test_console.js
Clone this wiki locally