Skip to content

ianwallen/GPIO-pca9548

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

18 Commits
 
 
 
 
 
 

Repository files navigation

GPIO-pca9548

Adapt PCA9548 mux to GPIO I2C bus for Raspberry Pi

The standard overlay only looks on the hardware ARM I2C bus for the mux.

This overlay adds additional bus entries in /dev for the mux channels.

You can check for new devices with 'sudo i2cdetect -y BUS'

You should be able to access devices with any code that can use the /dev/i2c-X device to address i2c devices on that bus. The RESET line would need code and a GPIO pin to clear hung devices.

/dev/i2c-3   This is the software GPIO i2c bus

/dev/i2c-4 This is the first mux i2c channel

/dev/i2c-5 This is the second mux i2c channel

.. (other channels)

To Install -

sudo dtc -I dts -O dtb -@ -o /boot/overlays/i2c_gpio-pca9548.dtbo i2c_gpio-pca9548.dts

In /boot/config.txt add these two lines. You can use other suitable GPIO pins for SCL and SDA (tested)

dtoverlay=i2c-gpio,i2c_gpio_sda=23,i2c_gpio_scl=24,i2c_gpio_delay_us=4

dtoverlay=i2c_gpio-pca9548

After reboot, you should see something like this in dmesg output:

[ 2.168710] systemd-udevd[137]: starting version 215

[ 2.527337] i2c-gpio i2c@0: using pins 23 (SDA) and 24 (SCL)

[ 2.796954] i2c i2c-3: Added multiplexed i2c bus 4

[ 2.799319] i2c i2c-3: Added multiplexed i2c bus 5

[ 2.801690] i2c i2c-3: Added multiplexed i2c bus 6

[ 2.803925] i2c i2c-3: Added multiplexed i2c bus 7

[ 2.808755] i2c i2c-3: Added multiplexed i2c bus 8

[ 2.809316] i2c i2c-3: Added multiplexed i2c bus 9

[ 2.811035] i2c i2c-3: Added multiplexed i2c bus 10

[ 2.812586] i2c i2c-3: Added multiplexed i2c bus 11

[ 2.812604] pca954x 3-0070: registered 8 multiplexed busses for I2C switch pca9548

This is with the default i2c address of 0x70. You can pass another address in the declaration:

dtoverlay=i2c_gpio-pca9548,addr=0x71

About

Adapt PCA9548 mux to GPIO I2C bus

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published