autosocks

Use systemd & ssh magic, to dynamically punch through firewalls; with "scale to zero" because coolness.

Use-Case

I have a bunch of systems I need to talk to which are hidden behind multiple jumpboxes. I want to use local clients to talk to APIs and systems behind those jumpboxes, I don't want to interactively log in to any jumpbox and run stuff or leave state there[1]. I want my ssh connections to be relatively short lived and don't want to manually manage them; they should be established and closed on demand.

In my case this is mostly to talk to things like

• BOSH directors
• opsmanagers
• credhubs
• TKGi APIs
• kube apiservers
• ...

via socks5, where those live inside private networks accessible only via one ore more bastion / jump hosts.

[1]: That should be forbidden anyway. No state and no interactive sessions on jumpboxes. Don't do it.

TL;DR

mkdir -p ~/.config/systemd/{autosocks,user}
cp -r units/* ~/.config/systemd/autosocks/
cd ~/.config/systemd/user

proxyhost='opsman.nonprod.acme'
proxyport=65500

proxyhost_esc="$(systemd-escape "$proxyhost")"

ln -s ../autosocks/[email protected]              "autosocks-${proxyhost_esc}@${proxyport}.socket"
ln -s ../autosocks/[email protected]             "autosocks-${proxyhost_esc}@${proxyport}.service"
ln -s ../autosocks/[email protected]  "autosocks-connection-${proxyhost_esc}@${proxyport}.service"

systemctl --user daemon-reload
systemctl --user start "autosocks-${proxyhost_esc}@${proxyport}.socket"

Prerequisites

ssh

I don't care about which or how many jumpboxes I need to use. I set it up once in my ~/.ssh/config and forget about it.

Host *
  ControlMaster auto
  ControlPath ~/.ssh/cm-%C
  ControlPersist no

Host *.prod.acme
  ForwardAgent yes
  ProxyJump bastion.prod.acme

Host *.sandbox.acme
  ForwardAgent yes
  ProxyJump bastion.sandbox.acme

This, and the fact that I use the ssh-agent, pull keys from vault and add them to the ssh-agent with a limited lifetime (ssh-add -t ...) allows me to e.g. do ssh opsman.prod.acme and it logs me.

Going forward, for each system you want to use to proxy through this needs to be true: You need to be able to ssh in with just providing the hostname. There must not be any other interaction (password prompt) or any other config needed; everything needs to be handled by the ssh config and the ssh-agent.

systemd foo

Now the fun part: Setting up systemd to dynamically manage your connection

1. in units you'll find 3 systemd unit templates. You need to copy those to your user's systemd directory (e.g. ~/.config/systemd/autosocks/). Those are just templates and won't do anything by themselves, but implement all the needed parts once they are instantiated.

   • [email protected]

     This implements the actual ssh connection, that will be started on-demand. Essentially, it will just call ssh $hostname and will use a specific port to bind ssh as a socks server on.

   • [email protected]

     This will run systemd-socket-proxyd which will take get the socket from systemd once connections have been observed and will proxy to the the socks proxy created by ssh.

     It will also make sure to:

     • Start a [email protected] instance on-demand and shut it down
     • Shut itself down, once ther is no traffic going through

   • [email protected]

     this will have systemd listen on a port and wait for connections. Once a connection is observed, systemd will start a [email protected] instance and pass the socket to that.

2. Instantiate & start those units

   systemd units can be templated with an "instance" (the thing after the @) and a "prefix" (the thing between the last - and the @). We'll use that to configure the host we want to proxy through and the local port we want the socks service to listen on.

   With the hosts from the above ssh config we can do the following:

   cd ~/.config/systemd/user/
   
   # set up a proxy through opsman.sandbox.acme
   ln -s ../autosocks/[email protected]             [email protected]
   ln -s ../autosocks/[email protected]            [email protected]
   ln -s ../autosocks/[email protected] [email protected]
   # enable the sandbox proxy
   systemd --user start [email protected]
   
   # set up a proxy through opsman.prod.acme
   ln -s ../autosocks/[email protected]             [email protected]
   ln -s ../autosocks/[email protected]            [email protected]
   ln -s ../autosocks/[email protected] [email protected]
   # enable the prod proxy
   systemd --user start [email protected]

   This creates a listening socket on 127.0.0.1:65500 for sandbox and 127.0.0.1:65501 for prod.

   If you did a netstat -lnp or similar, you'd see that on the ports 65500 and 65501 systemd is listening on. But not much more.

   Note: If you want to connect to a host with a - in its FQDN/name, you need to escape that - by \x2d. So the commands to link the units for a hostname like opsman.my-bizunit.acme would become something like:

   ln -s ../autosocks/[email protected]             autosocks-opsman.my\\[email protected]
   ln -s ../autosocks/[email protected]            autosocks-opsman.my\\[email protected]
   ln -s ../autosocks/[email protected] autosocks-connection-opsman.my\\[email protected]

client setup and usage

Now let's use that thing!

# It takes a bit to start all the systems, but eventually this should return
# (given, the host you proxy through has internet access).
https_proxy=socks5://localhost:65500 curl https://google.com/

# This is faster, because the connection is already established
https_proxy=socks5://localhost:65500 curl https://google.com/

And what you see now:

• There is a ssh process, connecting to opsman.sandbox.acme which is listening as a socks server on 127.255.255.254:65500
• There is a process systemd-socket-proxyd running now, which proxies everything on port 127.0.0.1:65500 to port 127.255.255.254:65500

If you wait a bit and there is no further traffic going through 65500

• both ssh and systemd-socket-proxyd will shut down automatically.
• the socket listening on 127.0.0.1:65500 will be moved back to the systemd process

How it works, how the things interact

• Once the [email protected] instance is running, systemd will listen on that intance's port (e.g. 127.0.0.1:65500)
• If there is a connection to that port, systemd starts
  • ssh to the unit's instance's host, running a socks proxy service on the same port but on 127.255.255.254 (e.g. 127.255.255.254:65500)
    • 127.255.255.254 is just another IP on the loopback interface. Any other local IP can be used; this is configured as AUTOSOCKS_IP in the [email protected] & [email protected] units
    • It's probably best to keep 127.255.255.254 exclusively for autosocks to reduce the chance of port collisions
  • systemd-socket-proxyd will be started; it will receive the socket from systemd and use it to receive traffic on 127.0.0.1:65500 and proxy it through to 127.255.255.254:65500
• systemd-socket-proxyd will shutdown, if it's idle for a bit
  • once systemd-socket-proxyd shuts down, so will the ssh connection providing the socks server
• if any of either the ssh connection or the activation socket will shutdown or die, so will the systemd-socket-proxyd. The system will however try to reestablish all the things on the next connection attempt to the instnace's port

Useful commands

• See all statuses: systemctl --user status --all 'autosocks*'
• Tail all logs: journalctl --user --all -f -u 'autosocks*'

Potential improvements

• ...

Shout Out

This is pretty much stolen from ankostis over at StackExchange. The only thing I did was to make it a bit easier to reuse by making use of the units' "instance" and "prefix".