New Crowdin updates

_pages/ar_SA/finalizing-setup.txt

@@ -35,7 +35,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
 
 ### What You Need
 
-* [finalize_helper.firm](https://github.com/hacks-guide/finalize/releases/latest/download/finalize_helper.firm) (direct download)
+* [x_finalize_helper.firm](https://github.com/hacks-guide/finalize/releases/latest/download/x_finalize_helper.firm) (direct download)
 * [finalize.romfs](https://github.com/hacks-guide/finalize/releases/latest/download/finalize.romfs) (direct download)
 
 ### Instructions
@@ -48,7 +48,7 @@ In this section, you will copy the files necessary to follow the rest of the ins
 1. Insert your SD card into your computer
 1. Copy `finalize.romfs` to the root of your SD card
 1. Open the `luma` folder on your SD card and create a folder named `payloads` inside, if it does not already exist
-1. Copy `finalize_helper.firm` to the `payloads` folder
+1. Copy `x_finalize_helper.firm` to the `payloads` folder
 1. Reinsert your SD card into your console
 
 The screenshot below indicates the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.
@@ -84,10 +84,8 @@ In this section, you will sync your 3DS internal clock with the actual time and
 In this section, you will use a series of scripts to automate homebrew installation, SD card cleanup, and system file backup.
 
 1. Power off your console
-1. Press and hold (Start), and while holding (Start), power on your console. This will launch the Finalizing Setup Helper
-    + If you boot to the Luma3DS configuration menu, you held SELECT instead of START
+1. Press and hold (X), and while holding (X), power on your console. This will launch the Finalizing Setup Helper
     + If you boot to the HOME Menu, your `payloads` folder may be incorrectly spelled or in the wrong location
-    + If you see a "Luma3DS Chainloader" menu, use the D-Pad and (A) buttons to navigate to and select `finalize_helper` from the list
     + If you encounter an error, consult the [troubleshooting](troubleshooting#finalizing-setup) page
 1. If the Helper was successful, your console will boot into GodMode9
     + From this point forward, you can access GodMode9 by holding START while powering on your console

_pages/ar_SA/include/winerror234.txt

@@ -0,0 +1,30 @@
+
+When creating the MSET9 ID1 on Windows 10 and above, the script may fail with this error:
+
+![Error 18](/images/screenshots/troubleshooting/234.png)
+
+This occurs because of the beta UTF-8 support in Windows. You must disable it to run MSET9:
+
+1. Hit **Windows Key + R** to open up the Run dialogue, type `intl.cpl` then click "OK"
+
+![Run](/images/screenshots/troubleshooting/234run.png)
+{: .notice--info}
+
+1. Click on `Administrative`, then `Change System Locale`
+
+![Region](/images/screenshots/troubleshooting/234region.png)
+{: .notice--info}
+![Administrative](/images/screenshots/troubleshooting/234administrative.png)
+{: .notice--info}
+
+1. Uncheck the box next to `Beta: Use Unicode UTF-8 for worldwide language support` then click "OK"
+
+![Locale](/images/screenshots/troubleshooting/234locale.png)
+{: .notice--info}
+
+1. Click "Restart Now"
+
+![Restart](/images/screenshots/troubleshooting/234restart.png)
+{: .notice--info}
+
+After your PC has rebooted, try creating the MSET9 ID1 again.

_pages/ar_SA/installing-boot9strap-(mset9-cli).txt

@@ -19,52 +19,74 @@ This page requires a computer running Windows, Linux, or macOS. If you have an A
 
 ### What You Need
 
-* The latest release of [MSET9](https://github.com/zoogie/MSET9/releases/latest) (the Release `.zip` file)
+* The latest release of [MSET9](https://github.com/hacks-guide/MSET9/releases/latest) (the MSET9 `.zip` file)
 * Any 3.x version of [Python](https://www.python.org/downloads/) **installed on your computer**
     + If you are on Linux or macOS, you may already have Python 3. Check by opening a Terminal window and entering `python3 -V`. If this returns a version number, it will work for this guide.
 
 ### Instructions
 
-On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the [troubleshooting](troubleshooting#installing-boot9strap-mset9) page.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. While the script is in progress, user data will temporarily disappear but will return upon the completion of this page. If you get an error when running the script, the solution to that error can most likely be found on the [troubleshooting](troubleshooting#installing-boot9strap-mset9) page.
 {: .notice--info}
 
 #### Section I - Prep Work
 
-In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+In this section, you will prepare the MSET9 exploit by **temporarily** creating a new HOME Menu profile with no user data, and then setting up that profile with only the minimum data required for MSET9 to trigger. Your existing user data will disappear, but will come back when you are finished with this page.
 
-1. Power on your console **with your SD card inserted**
-1. Open Mii Maker
-1. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
-    + You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
-    + If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
-1. Power off your console
 1. Insert your SD card into your computer
-1. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files
+1. Copy everything from the MSET9 `.zip` to the root of your SD card, overwriting any existing files
 
     ![MSET9 root layout](/images/screenshots/mset9/mset9-root-layout.png)
     {: .notice--info}
 
 1. Run the MSET9 script:
-    + **Windows**: Double-click `mset9.bat`
-    + **macOS**: Double-click `mset9.command` and enter your password if prompted
+{% capture mset9-chorus %}
+    + **Windows**: Double-click `MSET9-Windows.bat`
+    + **macOS**: Double-click `MSET9-macOS.command` and enter your password if prompted
     + **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
+{% endcapture %}
+    {{ mset9-chorus }}
 
     ![Image: MSET9 setup](/images/screenshots/mset9/mset9-select.png)
     {: .notice--info}
 
 1. Type the number corresponding to your console model and version, then press Enter
     + The window should change to this:
 
-    ![Image: MSET9 setup](/images/screenshots/mset9/mset9-setup.png)
+    ![Image: MSET9 setup](/images/screenshots/mset9/mset9-setup-notcreated.png)
     {: .notice--info}
 
     + Ensure that the correct console model and version is displayed
-1. Type `1`, then press Enter to ensure your console is prepared for MSET9
+1. Type `1`, then press Enter to begin the process of creating the MSET9 ID1
+1. After reviewing the disclaimer, type `1` again and press Enter to accept it
     + If you get an error, check the [troubleshooting](troubleshooting#installing-boot9strap-mset9), then try again
-    + If you get "Error 10: Database(s) malformed or missing!", follow the instructions [here](/images/screenshots/database-reset.jpg), then go back to Step 7 of this section
-1. If you see the message "Everything appears to be functional!", press Enter to close the MSET9 script
+1. If you see the message "Created hacked ID1.", press Enter to close the MSET9 script
+    + Your 3DS will appear to have no data / no user-installed apps on HOME Menu. **This is expected.** Your data will come back at a later step
 1. Reinsert your SD card into your console
 1. Power on your console
+1. Open Mii Maker
+1. Wait for your console to reach the [Welcome to Mii Maker](/images/screenshots/mset9/mii-welcome.png) screen, then exit Mii Maker and return to the Home Screen
+    + You should see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
+    + If you just reach the [normal](/images/screenshots/mset9/mii-existing.png) Mii Maker screen, exit Mii Maker and continue to the next step
+1. Launch System Settings and navigate to `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([image](/images/screenshots/database-reset.jpg))
+    + This will not wipe any of your data
+1. Power off your console by pressing the power button then tapping Power Off on the lower screen
+1. Insert your SD card into your computer
+1. Run the MSET9 script:
+
+    {{ mset9-chorus }}
+
+1. Type the number corresponding to your console model and version, then press Enter
+    + The window should change to this and display `Ready`:
+
+    ![Image: MSET9 setup](/images/screenshots/mset9/mset9-ready.png)
+    {: .notice--info}
+
+    + If the window says [Not ready - check MSET9 status for more details](/images/screenshots/mset9/mset9-not-ready.png):
+        + Type `2`, then press Enter to check the MSET9 status and follow the directions indicated
+        + Once you have resolved the issue, return to Section I Step 14
+        + For more information, check the [troubleshooting](troubleshooting#installing-boot9strap-mset9) page
+1. Type `0`, then press Enter to close the script
+1. Reinsert your SD card into your console
 
 #### Section II - MSET9
 
@@ -73,20 +95,18 @@ In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom f
 These instructions must be followed **EXACTLY**, so double-check EVERYTHING you are doing to avoid errors!
 {: .notice--danger}
 
-1. **[Hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad (do not select it yet)
-1. Power off, then power on your console
+1. Power on your console, ensuring System Settings is selected
+    + If System Settings is not selected, **[hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad, power your console off, then back on
 1. Press (A) to launch System Settings
 1. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
 1. **Do not press any buttons or touch the screen**
 1. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
-    + The menu will refresh and say that no SD card is inserted, which is expected
+    + The menu will refresh and say that no SD card is inserted
 1. Insert your SD card into your computer
 1. Run the MSET9 script:
-    + **Windows**: Double-click `mset9.bat`
-    + **macOS**: Double-click `mset9.command` and enter your password if prompted
-    + **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
+    {{ mset9-chorus }}
 1. Type the number corresponding to your console model and version, then press Enter
-1. In the MSET9 window, type `2`, then press Enter to inject MSET9
+1. In the MSET9 window, type `3`, then press Enter to inject MSET9
     + You should see "MSET9 successfully injected!"
 1. Press Enter to close the MSET9 script
 1. Reinsert your SD card into your console **without pressing any buttons or touching the screen**
@@ -100,19 +120,21 @@ These instructions must be followed **EXACTLY**, so double-check EVERYTHING you
 
 #### Section IV - Removing MSET9
 
-In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+In this section, you will remove MSET9 to prevent further issues and to restore your user data (games, themes, etc). (This will not remove the custom firmware that you have just installed.)
 
 Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
 {: .notice--danger}
 
 1. Power off your console
 1. Insert your SD card into your computer
 1. Run the MSET9 script:
-    + **Windows**: Double-click `mset9.bat`
-    + **macOS**: Double-click `mset9.command` and enter your password if prompted
-    + **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
+    {{ mset9-chorus }}
 1. Type the number corresponding to your console model and version, then press Enter
-1. In the MSET9 window, type `3`, then press Enter to remove MSET9
+    + The current state should display [Injected](/images/screenshots/mset9/mset9-injected.png)
+    + If you have already removed the trigger file (or never injected in the first place), the current state will show [Ready](/images/screenshots/mset9/mset9-ready.png), skip to Step 6
+1. Type `4`, then press Enter to remove the trigger file
+    + You should see "Removed trigger file."
+1. Type `5`, then press Enter to remove MSET9
     + You should see "Successfully removed MSET9!"
 1. Press Enter to close the MSET9 script