tcpkit

The tcpkit was designed to analyze network packets with lua script, can also be used to observe the request latency of the service with simple protocol, like redis/memcached.

Install

$ git clone https://github.com/git-hulk/tcpkit.git tcpkit
$ cd tcpkit
$ sudo make && make install

Usage

the tcpkit was designed to make network packets programable with LUA by @git-hulk
   -h, Print the tcpkit version strings, print a usage message, and exit
   -i interface, Listen on network card interface
   -r file, Read packets from file (which was created with the -w option or by other tools that write pcap)
   -A Print each packet (minus its link level header) in ASCII.  Handy for capturing web pages
   -B buffer_size, Set the operating system capture buffer size to buffer_size, in units of KiB (1024 bytes)
   -s snaplen, Snarf snaplen bytes of data from each packet rather than the default of 1500 bytes
   -S file, Push packets to lua state if the script was specified
   -t threshold, Print the request lantecy which slower than the threshold, in units of Millisecond
   -w file, Write the raw packets to file
   -p protocol, Parse the packet if the protocol was specified (supports: redis, memcached, http, raw)
   -P stats port, Listen port to fetch the latency stats, default is 33333


For example:

   `tcpkit -i eth0 tcp port 6379 -p redis` was used to monitor the redis reqeust latency

   `tcpkit -i eth0 tcp port 6379 -p redis -w 6379.pcap` would also dump the packets to `6379.pcap`

   `tcpkit -i eth0 tcp port 6379 -p redis -t 10` would only print the request latency slower than 10ms

How To Observe The Latency Of Redis/Memcached

$ tcpkit -i eth0 tcp port 6379 -p redis

tcpkit would listen on NIC eth0 and caputure the tcp port 6379, then parse network packets with Redis protocol. The output was like below:

2020-03-08 19:23:06.253384 127.0.0.1:51137 => 127.0.0.1:6379 | 0.615 ms | COMMAND
2020-03-08 19:23:06.258761 127.0.0.1:51137 => 127.0.0.1:6379 | 0.059 ms | get a

Use the option -t would only show the request which the request latency was slower than threshold(in units of millisecond).

How to Use Lua Script

$ tcpkit -i eth0 tcp port 6379 -p redis -S scripts/example.lua

the callback function function process(packet) in scripts/example.lua would be triggered if new packets reached.

Predefine Scripts

1. exmaple.lua - example for user defined script
2. dns.lua - print the dns latency
3. tcp-connnect.lua - print connection with syn packet retransmit

Request Latency

the stats port listen on 33333 by default, use the -P to change the listen port.

➜  ~ telnet 127.0.0.1 33333
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.

{
	"127.0.0.1:6379":	{
		"requests":	1700,
		"request_bytes":	184100,
		"responses":	1700,
		"response_bytes":	1413764,
		"latency":	[{
				"<0.1ms":	326
			}, {
				"0.1ms~0.2ms":	371
			}, {
				"0.2~0.5ms":	589
			}, {
				"0.5ms~1ms":	291
			}, {
				"1ms~5ms":	123
			}]
	}
}

License

tcpkit is under the MIT license. See the LICENSE file for details.