v0.42

• Added localization! Now you can help translate BSB-LAN into your language! Simply copy one of the language files from the localization folder (LANG_DE.h is the most complete) and translate whatever you can. Non-translated items will be displayed in German.
  Attention: Language definition in BSB_lan_config.h is now #define LANG
  For example: #define LANG DE
  This parameter is now mandatory!
• Added export to MQTT broker, use log_parameters[] in BSB_lan_config.h to define parameters and activate MQTTBrokerIP definement.
• Added support for WiFi modules such as an ESP8266 or a Wemos Mega connected to Serial3 (RX:15/TX:14) of the Arduino.
  The ESP8266 has to be flashed with the AT firmware from Espressif to work.
  Please take note that WiFi over serial is by design much slower (only 115kpbs) than "pure" TCP/IP connections.
• Added new category "34 - Konfiguration / Erweiterungsmodule". All subsequent categories move one number up!
• Lots of new parameters coming from device family 123, please run /Q to see if some parameters also work for your heater!
• Lots of new yet unknown parameters through brute force querying :) (parameter numbers 10200 and above)
• Added further PPS-Bus commands, moved parameter numbers to 15000 and above
• Default PPS mode now "listening".
  Use third parameter of bus definition to switch between listening and controlling, 1 stands for controlling, everything else for listening, i.e. BSB bus(68,67,1) sends data to the heater, BSB bus(68,67) only receives data from heater / room controller.
  You can switch between modes at run-time with URL command /P2,x where x is either 1 (for controlling) or not 1 (for listening only)
• Fixed bug that crashed PPS bus queries
• Stability improvements for PPS bus
• Improved graph legend when plotting several parameters
• Added JSON export; query with /JQ=a,b,c,d... or push queries to /JQ or push set commands to /JS
• Logging of MAX! parameters now possible with logging parameter 20007
• Added Waterstage WP device family (119)
• Added WHG Procon device family (195)
• Added unit to log file as well as average output
• Rewrote device matching in cmd_tbl to accomodate also device variant (Gerätevariante). Run /Q to see if transition has worked for your device!
• Added BSB_lan_custom_setup.h and BSB_lan_custom_global.h for you to add individual code (best used in conjunction with BSB_lan_custom.h)
• Marked all (known) OEM parameters with flag FL_OEM. OEM parameters are set by default as read-only. To make them writeable, change FL_OEM from 5 to 4 in BSB_lan_defs.h
• Increased performance for querying several parameters at once (similar to category query)
• Added config option to define subnet.
• /Q no longer needs #define DEBUG
• Bugfix ENUM memory adressing
• Bugfix in reset function (/N), clear EEPROM during reset with /NE
• Added favicon.ico
• Split of cmdtbl into cmdtbl1 and cmdtbl2 due to Arduino's(?) limit of 32kB size of struct, opening up more space for new parameters.