[target] FOXEERF722V4 ICM42668P

src/main/target/FOXE_FOXEERF722V4/target.c

@@ -0,0 +1,110 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include "platform.h"
+#include "drivers/io.h"
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+    DEF_TIM(TIM4, CH2, PB7,  TIM_USE_PPM,   0, 0),   // PPM&SBUS
+
+    DEF_TIM(TIM1, CH2, PA9,  TIM_USE_MOTOR, 0, 0),   // S1
+    DEF_TIM(TIM1, CH1, PA8,  TIM_USE_MOTOR, 0, 0),   // S2
+    DEF_TIM(TIM8, CH4, PC9,  TIM_USE_MOTOR, 0, 0),   // S3
+    DEF_TIM(TIM8, CH3, PC8,  TIM_USE_MOTOR, 0, 0),   // S4
+    DEF_TIM(TIM8, CH1, PC6,  TIM_USE_MOTOR, 0, 0),   // S5
+    DEF_TIM(TIM8, CH2, PC7,  TIM_USE_MOTOR, 0, 0),   // S6
+
+    DEF_TIM(TIM2, CH1, PA15,  TIM_USE_LED, 0, 0),    // LED STRIP(1,5)
+    DEF_TIM(TIM2, CH2, PB3,  TIM_USE_ANY, 0, 0),     // FC CAM};
+};
+
+// TIM_USE options:
+// TIM_USE_ANY
+// TIM_USE_BEEPER
+// TIM_USE_LED
+// TIM_USE_MOTOR
+// TIM_USE_NONE
+// TIM_USE_PPM
+// TIM_USE_PWM
+// TIM_USE_SERVO
+// TIM_USE_TRANSPONDER
+
+// config.h timers
+// #define MOTOR1_PIN           PA9
+// #define MOTOR2_PIN           PA8
+// #define MOTOR3_PIN           PC9
+// #define MOTOR4_PIN           PC8
+// #define TIMER_PIN_MAPPING \
+//     TIMER_PIN_MAP( 0, PB7 , 1,  0) \
+//     TIMER_PIN_MAP( 1, PA9 , 1,  0) \
+//     TIMER_PIN_MAP( 2, PA8 , 1,  0) \
+//     TIMER_PIN_MAP( 3, PC9 , 2,  0) \
+//     TIMER_PIN_MAP( 4, PC8 , 2,  0) \
+//     TIMER_PIN_MAP( 5, PC6 , 2,  0) \
+//     TIMER_PIN_MAP( 6, PC7 , 2,  0) \
+//     TIMER_PIN_MAP( 7, PA15, 1,  0) \
+//     TIMER_PIN_MAP( 8, PB3 , 1,  0)
+
+// unified timers
+//# timer
+// timer B07 AF2
+// # pin B07: TIM4 CH2 (AF2)
+// timer A09 AF1
+// # pin A09: TIM1 CH2 (AF1)
+// timer A08 AF1
+// # pin A08: TIM1 CH1 (AF1)
+// timer C09 AF3
+// # pin C09: TIM8 CH4 (AF3)
+// timer C08 AF3
+// # pin C08: TIM8 CH3 (AF3)
+// timer C06 AF3
+// # pin C06: TIM8 CH1 (AF3)
+// timer C07 AF3
+// # pin C07: TIM8 CH2 (AF3)
+// timer A15 AF1
+// # pin A15: TIM2 CH1 (AF1)
+// timer B03 AF1
+// # pin B03: TIM2 CH2 (AF1)
+// dma pin B07 0
+// # pin B07: DMA1 Stream 3 Channel 2
+// dma pin A09 0
+// # pin A09: DMA2 Stream 6 Channel 0
+// dma pin A08 0
+// # pin A08: DMA2 Stream 6 Channel 0
+// dma pin C09 0
+// # pin C09: DMA2 Stream 7 Channel 7
+// dma pin C08 0
+// # pin C08: DMA2 Stream 2 Channel 0
+// dma pin C06 0
+// # pin C06: DMA2 Stream 2 Channel 0
+// dma pin C07 0
+// # pin C07: DMA2 Stream 2 Channel 0
+// dma pin A15 0
+// # pin A15: DMA1 Stream 5 Channel 3
+// dma pin B03 0
+// # pin B03: DMA1 Stream 6 Channel 3
+
+// notice - this file was programmatically generated and may be incomplete.
+// recommend converting timers from unified-target; however, unified-targets will be sunsetted.

src/main/target/FOXE_FOXEERF722V4/target.h

@@ -0,0 +1,168 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "FOXE"
+#define USBD_PRODUCT_STRING "FOXEERF722V4"
+
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+#define USE_GYRO_SPI_ICM42688P
+#define USE_ACC_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+#define USE_MAX7456
+#define USE_ADC
+#define USE_SPI_GYRO
+
+#define USE_VCP
+#define USE_FLASHFS
+#define USE_FLASH_M25P16  //testing
+#define USE_FLASH_W25M    //testing
+#define USE_FLASH_W25M512 //testing
+#define USE_FLASH_W25Q    //testing
+#define USE_OSD
+
+#define USE_LED
+#define LED0_PIN             PC15
+#define LED_STRIP_PIN        PA15
+#define USE_BEEPER
+#define BEEPER_PIN           PA4
+#define BEEPER_INVERTED
+#define CAMERA_CONTROL_PIN   PB3
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN         PA5
+#define SPI1_MISO_PIN        PA6
+#define SPI1_MOSI_PIN        PA7
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN         PB13
+#define SPI2_MISO_PIN        PB14
+#define SPI2_MOSI_PIN        PB15
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN         PC10
+#define SPI3_MISO_PIN        PC11
+#define SPI3_MOSI_PIN        PB5
+
+#define GYRO_1_ALIGN CW270_DEG
+#define ACC_1_ALIGN          CW270_DEG
+#define GYRO_1_CS_PIN        PB2
+#define GYRO_1_EXTI_PIN      PC4
+// notice - GYRO_1_EXTI_PIN and MPU_INT_EXTI may be used interchangeably; there is no other [gyroModel]_EXTI_PIN
+#define GYRO_1_SPI_INSTANCE SPI1
+#define MPU_INT_EXTI         PC4
+
+
+#define USE_EXTI
+//#define USE_GYRO_EXTI
+// notice - USE_GYRO_EXTI validity unknown at this time
+
+#define USE_MPU_DATA_READY_SIGNAL
+
+#define ACC_MPU6000_ALIGN         CW270_DEG
+#define GYRO_MPU6000_ALIGN        CW270_DEG
+#define MPU6000_CS_PIN            PB2
+#define MPU6000_SPI_INSTANCE      SPI1
+
+#define ACC_ICM42688P_ALIGN      CW270_DEG
+#define GYRO_ICM42688P_ALIGN     CW270_DEG
+#define ICM42688P_CS_PIN         PB2
+#define ICM42688P_SPI_INSTANCE   SPI1
+
+// notice - this file was programmatically generated and may need GYRO_2 manually added.
+
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C_DEVICE        (I2CDEV_1)
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define BARO_I2C_INSTANCE (I2CDEV_1)
+#define I2C1_SCL PB8
+#define I2C1_SDA PB9
+// notice - this file was programmatically generated and likely needs MAG/BARO manually added and/or verified.
+
+#define FLASH_CS_PIN         PB12
+#define FLASH_SPI_INSTANCE SPI2
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+#define MAX7456_SPI_CS_PIN   PC3
+#define MAX7456_SPI_INSTANCE SPI3
+
+#define USE_UART1
+#define USE_UART2
+#define USE_UART3
+#define USE_UART4
+#define USE_UART5
+#define USE_UART6
+#define UART1_TX_PIN         PB6
+#define UART2_TX_PIN         PA2
+#define UART3_TX_PIN         PB10
+#define UART4_TX_PIN         PA0
+#define UART5_TX_PIN         PC12
+#define UART6_TX_PIN         PC6
+#define UART1_RX_PIN         PB7
+#define UART2_RX_PIN         PA3
+#define UART3_RX_PIN         PB11
+#define UART4_RX_PIN         PA1
+#define UART5_RX_PIN         PD2
+#define UART6_RX_PIN         PC7
+#define RX_PPM_PIN           PB7
+#define SERIAL_PORT_COUNT 7
+// notice - UART/USART were programmatically generated - should verify UART/USART.
+// notice - may need "#define SERIALRX_UART SERIAL_PORT_USART_"
+// notice - may need "#define DEFAULT_RX_FEATURE, SERIALRX_PROVIDER
+// notice - should verify serial count.
+
+#define VBAT_ADC_PIN PC0
+#define CURRENT_METER_ADC_PIN PC2
+#define RSSI_ADC_PIN PA0
+#define ADC3_DMA_STREAM DMA2_Stream0 // notice - DMA2_Stream0 likely wrong - found in unified-target.
+// # ADC 3: DMA2 Stream 0 Channel 2 // notice - use this for above define.
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define ADC_INSTANCE ADC3
+// notice - DMA conversion were programmatically generated and may be incomplete.
+
+#define ENABLE_DSHOT_DMAR true
+
+// notice - this file was programmatically generated and may not have accounted for any config instance of "#define TLM_INVERTED ON", etc.
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+// notice - masks were programmatically generated - must verify last port group for 0xffff or (BIT(2))
+
+#define DEFAULT_FEATURES       (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_AIRMODE | FEATURE_RX_SERIAL)
+#define DEFAULT_RX_FEATURE     FEATURE_RX_SERIAL
+// notice - incomplete; may need additional DEFAULT_FEATURES; e.g. FEATURE_SOFTSERIAL | FEATURE_RX_SPI
+
+#define USABLE_TIMER_CHANNEL_COUNT 9
+#define USED_TIMERS ( TIM_N(1) | TIM_N(2) | TIM_N(4) | TIM_N(8) )
+// notice - incomplete. add/remove/replace x
+
+// notice - this file was programmatically generated and may be incomplete.

src/main/target/FOXE_FOXEERF722V4/target.mk

@@ -0,0 +1,13 @@
+F7X5XG_TARGETS += $(TARGET)
+FEATURES       += VCP ONBOARDFLASH
+
+TARGET_SRC = \
+drivers/accgyro/accgyro_mpu.c \
+drivers/accgyro/accgyro_spi_mpu6000.c \
+drivers/accgyro/accgyro_spi_icm426xx.c \
+drivers/light_led.h \
+drivers/light_ws2811strip.c \
+drivers/max7456.c \
+
+# notice - this file was programmatically generated and may be incomplete.
+#  eg: flash, compass, barometer, vtx6705, ledstrip, pinio, etc.