docs: add rebalance v2alpha2

docs/en_US/tasks/configure-emqx-rebalance.md

@@ -13,7 +13,7 @@ The value of rebalancing mainly has the following two points:
 - **Improve system scalability**: Due to the persistent nature of MQTT connections, connections to the original nodes will not automatically migrate to the new nodes when the cluster scales. To address this, you can use the load rebalancing feature to smoothly transfer connections from overloaded nodes to newly-added ones. This process ensures a more balanced distribution of load across the entire cluster and enhances throughput, response speed, and resource utilization rate.
 - **Reduce O&M costs**: For clusters with unevenly distributed loads, where some nodes are overloaded while others remain idle, you can use the load rebalancing feature to automatically adjust the load within the cluster. This helps achieve a more balanced distribution of work and reduces operation and maintenance costs.
 
-For EMQX cluster load rebalancing, please refer to the document: [Rebalancing](https://docs.emqx.com/en/enterprise/v4.4/advanced/rebalancing.html#rebalancing).
+For EMQX cluster load rebalancing, please refer to the document: [Rebalancing](https://docs.emqx.com/en/enterprise/v5.1/deploy/cluster/rebalancing.html#%E9%9B%86%E7%BE%A4%E8%B4%9F%E8%BD%BD%E9%87%8D%E5%B9%B3%E8%A1%A1)
 
 :::tip
 
@@ -25,13 +25,18 @@ The cluster load rebalancing requirements EMQX Enterprise must be greater than o
 
 The corresponding CRD of the cluster rebalancing in EMQX Operator is `Rebalance`, and its example is as follows:
 
+:::: tabs type:card
+
+::: tab apps.emqx.io/v2alpha2
+
 ```yaml
-apiVersion: apps.emqx.io/v1beta4
+apiVersion: apps.emqx.io/v2alpha2
 kind: Rebalance
 metadata:
    name: rebalance-sample
 spec:
    instanceName: emqx-ee
+   instanceKind: EMQX
    rebalanceStrategy:
      connEvictRate: 10
      sessEvictRate: 10
@@ -43,8 +48,38 @@ spec:
      relSessThreshold: "1.1"
 ```
 
+> For Rebalance configuration, please refer to the document: [Rebalance reference](../reference/v2alpha2-reference.md#rebalancestrategy).
+
+:::
+
+::: tab apps.emqx.io/v1beta4
+
+```yaml
+apiVersion: apps.emqx.io/v1beta4
+kind: Rebalance
+metadata:
+  name: rebalance-sample
+spec:
+  instanceName: emqx-ee
+  instanceKind: EmqxEnterprise
+  rebalanceStrategy:
+    connEvictRate: 10
+    sessEvictRate: 10
+    waitTakeover: 10
+    waitHealthCheck: 10
+    absConnThreshold: 100
+    absSessThreshold: 100
+    relConnThreshold: "1.1"
+    relSessThreshold: "1.1"
+```
+
 > For Rebalance configuration, please refer to the document: [Rebalance reference](../reference/v1beta4-reference.md#rebalancestrategy).
 
+
+:::
+
+::::
+
 ## Test Load Rebalancing
 
 ### Cluster Load Distribution Before Rebalancing
@@ -64,6 +99,7 @@ metadata:
    name: rebalance-sample
 spec:
    instanceName: emqx-ee
+   instanceKind: EmqxEnterprise
    rebalanceStrategy:
      connEvictRate: 10
      sessEvictRate: 10

docs/zh_CN/tasks/configure-emqx-rebalance.md

@@ -14,7 +14,7 @@
 
 - **降低运维成本**：如果系统中某些节点负载过高或过低，需要对这些节点进行手动调整，而通过重平衡，可以自动调整节点的负载，降低运维成本。
 
-关于 EMQX 集群负载重平衡可以参考文档：[重平衡](https://docs.emqx.com/zh/enterprise/v4.4/advanced/rebalancing.html#%E9%87%8D%E5%B9%B3%E8%A1%A1)。
+关于 EMQX 集群负载重平衡可以参考文档：[重平衡](https://docs.emqx.com/zh/enterprise/v5.1/deploy/cluster/rebalancing.html#%E9%9B%86%E7%BE%A4%E8%B4%9F%E8%BD%BD%E9%87%8D%E5%B9%B3%E8%A1%A1)
 
 :::tip
 
@@ -26,13 +26,43 @@
 
 集群重平衡在 EMQX Operator 里面对应的 CRD 为 `Rebalance`，其示例如下所示：
 
+:::: tabs type:card
+
+::: tab apps.emqx.io/v2alpha2
+
+```yaml
+apiVersion: apps.emqx.io/v2alpha2
+kind: Rebalance
+metadata:
+  name: rebalance-sample
+spec:
+  instanceName: emqx-ee
+  instanceKind: EMQX
+  rebalanceStrategy:
+    connEvictRate: 10
+    sessEvictRate: 10
+    waitTakeover: 10
+    waitHealthCheck: 10
+    absConnThreshold: 100
+    absSessThreshold: 100
+    relConnThreshold: "1.1"
+    relSessThreshold: "1.1"
+```
+
+> 关于 Rebalance 配置可以参考文档：[Rebalance reference](../reference/v2alpha2-reference.md#rebalancestrategy)。
+
+:::
+
+::: tab apps.emqx.io/v1beta4
+
 ```yaml
 apiVersion: apps.emqx.io/v1beta4
 kind: Rebalance
 metadata:
   name: rebalance-sample
 spec:
   instanceName: emqx-ee
+  instanceKind: EmqxEnterprise
   rebalanceStrategy:
     connEvictRate: 10
     sessEvictRate: 10
@@ -46,6 +76,12 @@ spec:
 
 > 关于 Rebalance 配置可以参考文档：[Rebalance reference](../reference/v1beta4-reference.md#rebalancestrategy)。
 
+:::
+
+::::
+
+
+
 ## 测试集群负载重平衡
 
 ### 集群负载情况（重平衡前）
@@ -65,6 +101,7 @@ metadata:
   name: rebalance-sample
 spec:
   instanceName: emqx-ee
+  instanceKind: EmqxEnterprise
   rebalanceStrategy:
     connEvictRate: 10
     sessEvictRate: 10