Molecular Property Prediction

This repository contains message passing neural networks for molecular property prediction as described in the paper Analyzing Learned Molecular Representations for Property Prediction and as used in the paper A Deep Learning Approch to Antibiotic Discovery.

A web prediction interface with some trained chemprop models is available at chemprop.csail.mit.edu.

COVID-19 Update

Please see aicures.mit.edu and the associated data GitHub repo for information about our recent efforts to use chemprop to identify drug candidates for treating COVID-19.

Table of Contents

• Requirements
• Installation
  • Option 1: Conda
  • Option 2: Docker
  • (Optional) Installing chemprop as a Package
  • Notes
• Web Interface
• Data
• Training
  • Train/Validation/Test Splits
  • Cross validation
  • Ensembling
  • Hyperparameter Optimization
  • Additional Features
    • RDKit 2D Features
    • Custom Features
• Predicting
• Interpreting Model Prediction
• TensorBoard
• Results

Requirements

While it is possible to run all of the code on a CPU-only machine, GPUs make training significantly faster. To run with GPUs, you will need:

• cuda >= 8.0
• cuDNN

Installation

Option 1: Conda

The easiest way to install the chemprop dependencies is via conda. Here are the steps:

1. Install Miniconda from https://conda.io/miniconda.html
2. cd /path/to/chemprop
3. conda env create -f environment.yml
4. conda activate chemprop (or source activate chemprop for older versions of conda)

Note that on machines with GPUs, you may need to manually install a GPU-enabled version of PyTorch by following the instructions here.

Option 2: Docker

Docker provides a nice way to isolate the chemprop code and environment. To install and run our code in a Docker container, follow these steps:

1. Install Docker from https://docs.docker.com/install/
2. cd /path/to/chemprop
3. docker build -t chemprop .
4. docker run -it chemprop:latest /bin/bash

Note that you will need to run the latter command with nvidia-docker if you are on a GPU machine in order to be able to access the GPUs.

(Optional) Installing chemprop as a Package

If you would like to use functions or classes from chemprop in your own code, you can install chemprop as a pip package as follows:

1. cd /path/to/chemprop
2. pip install -e .

Then you can use import chemprop or from chemprop import ... in your other code.

Notes

PyTorch GPU: Although PyTorch is installed automatically along with chemprop, you may need to install the GPU version manually. Instructions are available here.

Web Interface

For those less familiar with the command line, we also have a web interface which allows for basic training and predicting. An example of the website (in demo mode with training disabled) is available here: chemprop.csail.mit.edu.

You can start the web interface on your local machine in two ways:

1. Run python web/run.py and then navigate to localhost:5000 in a web browser. This will start the site in development mode.
2. Run gunicorn --bind {host}:{port} 'wsgi:build_app()'. This will start the site in production mode.
   • To run this server in the background, add the --daemon flag.
   • Arguments including init_db and demo can be passed with this pattern: 'wsgi:build_app(init_db=True, demo=True)'
   • Gunicorn documentation can be found here.

Data

In order to train a model, you must provide training data containing molecules (as SMILES strings) and known target values. Targets can either be real numbers, if performing regression, or binary (i.e. 0s and 1s), if performing classification. Target values which are unknown can be left as blanks.

Our model can either train on a single target ("single tasking") or on multiple targets simultaneously ("multi-tasking").

The data file must be be a CSV file with a header row. For example:

smiles,NR-AR,NR-AR-LBD,NR-AhR,NR-Aromatase,NR-ER,NR-ER-LBD,NR-PPAR-gamma,SR-ARE,SR-ATAD5,SR-HSE,SR-MMP,SR-p53
CCOc1ccc2nc(S(N)(=O)=O)sc2c1,0,0,1,,,0,0,1,0,0,0,0
CCN1C(=O)NC(c2ccccc2)C1=O,0,0,0,0,0,0,0,,0,,0,0
...

By default, it is assumed that the SMILES are in the first column and the targets are in the remaining columns. However, the specific columns containing the SMILES and targets can be specified using the --smiles_column <column> and --target_columns <column_1> <column_2> ... flags, respectively.

Datasets from MoleculeNet and a 450K subset of ChEMBL from http://www.bioinf.jku.at/research/lsc/index.html have been preprocessed and are available in data.tar.gz. To uncompress them, run tar xvzf data.tar.gz.

Training

To train a model, run:

python train.py --data_path <path> --dataset_type <type> --save_dir <dir>

where <path> is the path to a CSV file containing a dataset, <type> is either "classification" or "regression" depending on the type of the dataset, and <dir> is the directory where model checkpoints will be saved.

For example:

python train.py --data_path data/tox21.csv --dataset_type classification --save_dir tox21_checkpoints

Notes:

• The default metric for classification is AUC and the default metric for regression is RMSE. Other metrics may be specified with --metric <metric>.
• --save_dir may be left out if you don't want to save model checkpoints.
• --quiet can be added to reduce the amount of debugging information printed to the console. Both a quiet and verbose version of the logs are saved in the save_dir.

Train/Validation/Test Splits

Our code supports several methods of splitting data into train, validation, and test sets.

Random: By default, the data will be split randomly into train, validation, and test sets.

Scaffold: Alternatively, the data can be split by molecular scaffold so that the same scaffold never appears in more than one split. This can be specified by adding --split_type scaffold_balanced.

Separate val/test: If you have separate data files you would like to use as the validation or test set, you can specify them with --separate_val_path <val_path> and/or --separate_test_path <test_path>.

Note: By default, both random and scaffold split the data into 80% train, 10% validation, and 10% test. This can be changed with --split_sizes <train_frac> <val_frac> <test_frac>. For example, the default setting is --split_sizes 0.8 0.1 0.1. Both also involve a random component and can be seeded with --seed <seed>. The default setting is --seed 0.

Cross validation

k-fold cross-validation can be run by specifying --num_folds <k>. The default is --num_folds 1.

Ensembling

To train an ensemble, specify the number of models in the ensemble with --ensemble_size <n>. The default is --ensemble_size 1.

Hyperparameter Optimization

Although the default message passing architecture works quite well on a variety of datasets, optimizing the hyperparameters for a particular dataset often leads to marked improvement in predictive performance. We have automated hyperparameter optimization via Bayesian optimization (using the hyperopt package) in hyperparameter_optimization.py. This script finds the optimal hidden size, depth, dropout, and number of feed-forward layers for our model. Optimization can be run as follows:

python hyperparameter_optimization.py --data_path <data_path> --dataset_type <type> --num_iters <n> --config_save_path <config_path>

where <n> is the number of hyperparameter settings to try and <config_path> is the path to a .json file where the optimal hyperparameters will be saved. Once hyperparameter optimization is complete, the optimal hyperparameters can be applied during training by specifying the config path as follows:

python train.py --data_path <data_path> --dataset_type <type> --config_path <config_path>

Note that the hyperparameter optimization script sees all the data given to it. The intended use is to run the hyperparameter optimization script on a dataset with the eventual test set held out. If you need to optimize hyperparameters separately for several different cross validation splits, you should e.g. set up a bash script to run hyperparameter_optimization.py separately on each split's training and validation data with test held out.

Additional Features

While the model works very well on its own, especially after hyperparameter optimization, we have seen that adding computed molecule-level features can further improve performance on certain datasets. Features can be added to the model using the --features_generator <generator> flag.

RDKit 2D Features

As a starting point, we recommend using pre-normalized RDKit features by using the --features_generator rdkit_2d_normalized --no_features_scaling flags. In general, we recommend NOT using the --no_features_scaling flag (i.e. allow the code to automatically perform feature scaling), but in the case of rdkit_2d_normalized, those features have been pre-normalized and don't require further scaling.

Note: In order to use the rdkit_2d_normalized features, you must have descriptastorus installed. If you installed via conda, you can install descriptastorus by running pip install git+https://github.com/bp-kelley/descriptastorus. If you installed via Docker, descriptastorus should already be installed.

The full list of available features for --features_generator is as follows.

morgan is binary Morgan fingerprints, radius 2 and 2048 bits. morgan_count is count-based Morgan, radius 2 and 2048 bits. rdkit_2d is an unnormalized version of 200 assorted rdkit descriptors. Full list can be found at the bottom of our paper: https://arxiv.org/pdf/1904.01561.pdf rdkit_2d_normalized is the CDF-normalized version of the 200 rdkit descriptors.

Custom Features

If you would like to load custom features, you can do so in two ways:

1. Generate features: If you want to generate features in code, you can write a custom features generator function in chemprop/features/features_generators.py. Scroll down to the bottom of that file to see a features generator code template.
2. Load features: If you have features saved as a numpy .npy file or as a .csv file, you can load the features by using --features_path /path/to/features. Note that the features must be in the same order as the SMILES strings in your data file. Also note that .csv files must have a header row and the features should be comma-separated with one line per molecule.

Predicting

To load a trained model and make predictions, run predict.py and specify:

• --test_path <path> Path to the data to predict on.
• A checkpoint by using either:
  • --checkpoint_dir <dir> Directory where the model checkpoint(s) are saved (i.e. --save_dir during training). This will walk the directory, load all .pt files it finds, and treat the models as an ensemble.
  • --checkpoint_path <path> Path to a model checkpoint file (.pt file).
• --preds_path Path where a CSV file containing the predictions will be saved.

For example:

python predict.py --test_path data/tox21.csv --checkpoint_dir tox21_checkpoints --preds_path tox21_preds.csv

or

python predict.py --test_path data/tox21.csv --checkpoint_path tox21_checkpoints/fold_0/model_0/model.pt --preds_path tox21_preds.csv

Interpreting

It is often helpful to provide explanation of model prediction (i.e., this molecule is toxic because of this substructure). Given a trained model, you can interpret the model prediction using the following command

python interpret.py --data_path data/tox21.csv --checkpoint_dir tox21_checkpoints/fold_0/ --property_id 1

The output will be like the following:

• The first column is a molecule and second column is its predicted property (in this case NR-AR toxicity).
• The third column is the smallest substructure that made this molecule classified as toxic (which we call rationale).
• The fourth column is the predicted toxicity of that substructure.

As shown in the first row, when a molecule is predicted to be non-toxic, we will not provide any rationale for its prediction.

smiles	NR-AR	rationale	rationale_score
O=[N+]([O-])c1cc(C(F)(F)F)cc([N+](=O)[O-])c1Cl	0.014
CC1(C)O[C@@H]2C[C@H]3[C@@H]4C[C@H](F)C5=CC(=O)C=C[C@]5(C)[C@H]4[C@@H](O)C[C@]3(C)[C@]2(C(=O)CO)O1	0.896	C[C@]12C=CC(=O)C=C1[CH2:1]C[CH2:1][CH2:1]2	0.769
C[C@]12CC[C@H]3[C@@H](CC[C@@]45O[C@@H]4C(O)=C(C#N)C[C@]35C)[C@@H]1CC[C@@H]2O	0.941	C[C@]12C[CH:1]=[CH:1][C@H]3O[C@]31CC[C@@H]1[C@@H]2CC[C:1][CH2:1]1	0.808
C[C@]12C[C@H](O)[C@H]3[C@@H](CCC4=CC(=O)CC[C@@]43C)[C@@H]1CC[C@]2(O)C(=O)COP(=O)([O-])[O-]	0.957	C1C[CH2:1][C:1][C@@H]2[C@@H]1[C@@H]1CC[C:1][C:1]1C[CH2:1]2	0.532

Our interpretation script explains model prediction one property at a time. --property_id 1 tells the script to provide explanation for the first property in the dataset (which is NR-AR). In a multi-task training setting, you will need to change --property_id to provide explanation for each property in the dataset.

For computational efficiency, we currently restricted the rationale to have maximum 20 atoms and minimum 8 atoms. You can adjust these constraints through --max_atoms and --min_atoms argument.

TensorBoard

During training, TensorBoard logs are automatically saved to the same directory as the model checkpoints. To view TensorBoard logs, run tensorboard --logdir=<dir> where <dir> is the path to the checkpoint directory. Then navigate to http://localhost:6006.

Results

We compared our model against MolNet by Wu et al. on all of the MolNet datasets for which we could reproduce their splits (all but Bace, Toxcast, and qm7). When there was only one fold provided (scaffold split for BBBP and HIV), we ran our model multiple times and reported average performance. In each case we optimize hyperparameters on separate folds, use rdkit_2d_normalized features when useful, and compare to the best-performing model in MolNet as reported by Wu et al. We did not ensemble our model in these results.

Results on regression datasets (lower is better)

Dataset	Size	Metric	Ours	MolNet Best Model
QM8	21,786	MAE	0.011 ± 0.000	0.0143 ± 0.0011
QM9	133,885	MAE	2.666 ± 0.006	2.4 ± 1.1
ESOL	1,128	RMSE	0.555 ± 0.047	0.58 ± 0.03
FreeSolv	642	RMSE	1.075 ± 0.054	1.15 ± 0.12
Lipophilicity	4,200	RMSE	0.555 ± 0.023	0.655 ± 0.036
PDBbind (full)	9,880	RMSE	1.391 ± 0.012	1.25 ± 0
PDBbind (core)	168	RMSE	2.173 ± 0.090	1.92 ± 0.07
PDBbind (refined)	3,040	RMSE	1.486 ± 0.026	1.38 ± 0

Results on classification datasets (higher is better)

Dataset	Size	Metric	Ours	MolNet Best Model
PCBA	437,928	PRC-AUC	0.335 ± 0.001	0.136 ± 0.004
MUV	93,087	PRC-AUC	0.041 ± 0.007	0.184 ± 0.02
HIV	41,127	ROC-AUC	0.776 ± 0.007	0.792 ± 0
BBBP	2,039	ROC-AUC	0.737 ± 0.001	0.729 ± 0
Tox21	7,831	ROC-AUC	0.851 ± 0.002	0.829 ± 0.006
SIDER	1,427	ROC-AUC	0.676 ± 0.014	0.648 ± 0.009
ClinTox	1,478	ROC-AUC	0.864 ± 0.017	0.832 ± 0.037

Lastly, you can find the code to our original repo at https://github.com/wengong-jin/chemprop and for the Mayr et al. baseline at https://github.com/yangkevin2/lsc_experiments .