Marlin is a firmware for RepRap machines, also known as 3D printers. firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards through the use of a "hardware abstraction layer."
Additional documentation can be found at the Marlin Home Page. Please let us know if Marlin misbehaves in any way. Volunteers are standing by!
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
To build Marlin you'll need Arduino IDE 1.8.8 or newer or PlatformIO with Visual Studio Code.
Creality Ender-3 with SKR Mini E3 v1.2, Creality BLTouch 3.1 and Dualgear Extruder.
- BLTouch (Bi-Linear Bed Leveling)
- Assisted Bed Tramming (Using BLTouch)
- Custom Status Screen (Ender-3 Default)
- Disable Boot Screens
- Disable Info Screen
- Enabled S Curve Acceleration
- ARC Support (Install Cura plugin ArcWelder to use it.)
- Enabled Linear Advance
- Enabled Square Wave Stepping
- Bed Size is 228x228mm
- Enable Menu to Level Bed Corners (and Center)
- Enable Probe Offset Wizard
- Assisted Probe to Nozzle Z-Offset
- Pre-Heat for "PLA" and "PETG" and "HOT-PLUG"
I will be updating this picture later to be more clear, the BLTouch Probe cables should go in the Dedicated Probe PIN PC14, not on the Z-Endstop as others suggest.
Please note that ANTCLabs cable colors could be differnet.
Please make sure to go over the configuration of the system before installing this Firmware.
Marlin is published under the GPL license because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.
While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.
