SmartOS WiFi feed

WiFi packages from OpenWrt master branch with some modifications for SmartOS.

Description

The goal is to maintain synchronization with OpenWrt master while providing a sandbox for support of new WiFi chips and features.

Currently supported WiFi chips include:

• MT7622
• MT7615
• MT7915
• MT7981
• MT7986
• MT7992
• MT7996

Usage

This feed can be applied and used on top of OpenWrt master. Many Adtran/SmartRG SDG targets are supported via upstream OpenWrt and this feed can be used with any of them.

Clone OpenWrt

git clone https://github.com/openwrt/openwrt.git
cd openwrt

Setup Feeds

echo "src-git --force 0wifi https://github.com/cmonroe/feed-wifi-master.git" > feeds.conf
cat feeds.conf.default >> feeds.conf
./scripts/feeds update -a
./scripts/feeds install -a

Config

At minimum, the following menuconfig changes are necessary:

• Target System -> MediaTek ARM
• Subtarget -> Filogic 8x0 (MT798x)
• Target Profile -> Multiple devices
• [enable] Target Devices ->
• [enable] Kernel Modules -> Wireless Drivers -> Enable testmode command support
• [disable] Firmware -> mt7986-wo-firmware
• Network -> WirelessAPD
  • [enable] hostapd-openssl
  • [enable] hostapd-utils
  • [enable] wpa-supplicant-openssl
  • [disable] wpad-basic-mbedtls
  • [enable] wpa-cli

For simplicity, there are two diffconfig variants in the build directory.

1. diffconfig.basic - just the changes described above.
2. diffconfig.full - adds more tools such as LuCi, tcpdump, iperf3, etc.

cp feeds/0wifi/build/diffconfig.full .config
make defconfig

Build

make -j$(nproc) || make V=s