CI: test running the built avrdude executable #2528
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # build.yml - GitHub build action for AVRDUDE | |
| # Copyright (C) 2021 Marius Greuel | |
| # | |
| # This program is free software; you can redistribute it and/or modify | |
| # it under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, | |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| # GNU General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| # | |
| name: Build | |
| on: | |
| push: | |
| branches-ignore: | |
| - 'onlinedocs' | |
| pull_request: | |
| branches-ignore: | |
| - 'onlinedocs' | |
| workflow_call: | |
| env: | |
| BUILD_TYPE: RelWithDebInfo | |
| jobs: | |
| linux-x86_64-autotools: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| sudo apt-get update | |
| sudo apt-get install -y | |
| build-essential | |
| automake | |
| libtool | |
| flex | |
| bison | |
| libelf-dev | |
| libusb-dev | |
| libusb-1.0-0-dev | |
| libhidapi-dev | |
| libftdi1-dev | |
| libreadline-dev | |
| libserialport-dev | |
| libgpiod-dev | |
| texinfo | |
| texlive | |
| texi2html | |
| - name: Configure | |
| run: >- | |
| autoreconf -vis src | |
| mkdir _ambuild && cd _ambuild | |
| ../src/configure | |
| --enable-shared | |
| --enable-parport | |
| --enable-linuxgpio | |
| --enable-linuxspi | |
| - name: Build | |
| run: make -C _ambuild -j$(nproc) | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e _ambuild/avrdude -c '-C _ambuild/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: sudo make -C _ambuild install | |
| - name: Debug Information | |
| run: >- | |
| find /usr/local -not -type d -ipath '*avrdude*' | |
| ldd /usr/local/bin/avrdude | |
| ldconfig -N -X -v | |
| - name: "Dryrun test (installed)" | |
| run: >- | |
| export LD_LIBRARY_PATH=/usr/local/lib | |
| printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| # Re-enable distcheck after the doc fixes | |
| # - name: distcheck | |
| # run: make -C _ambuild -j$(nproc) distcheck "DISTCHECK_CONFIGURE_FLAGS=--disable-doc" | |
| linux-x86_64: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| sudo apt-get update | |
| sudo apt-get install -y | |
| build-essential | |
| cmake | |
| flex | |
| bison | |
| libelf-dev | |
| libusb-dev | |
| libusb-1.0-0-dev | |
| libhidapi-dev | |
| libftdi1-dev | |
| libreadline-dev | |
| libserialport-dev | |
| libgpiod-dev | |
| texinfo | |
| texlive | |
| texi2html | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D BUILD_DOC=1 | |
| -D DEBUG_CMAKE=1 | |
| -D HAVE_LINUXGPIO=1 | |
| -D HAVE_LINUXSPI=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e build/src/avrdude -c '-C build/src/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: sudo cmake --build build --target install | |
| - name: "Dryrun test (installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-linux-x86_64 | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-linux-x86_64 | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| linux: | |
| runs-on: ubuntu-latest | |
| container: debian:11 | |
| strategy: | |
| matrix: | |
| include: | |
| - { arch: i386, processor: i686, prefix: i686-linux-gnu, inc-lib: i386-linux-gnu } | |
| - { arch: armhf, processor: armhf, prefix: arm-linux-gnueabihf, inc-lib: arm-linux-gnueabihf } | |
| - { arch: arm64, processor: aarch64, prefix: aarch64-linux-gnu, inc-lib: aarch64-linux-gnu } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Add architecture | |
| run: | | |
| dpkg --add-architecture ${{matrix.arch}} | |
| apt-get update | |
| - name: Install prerequisites | |
| run: >- | |
| apt-get update | |
| apt-get install -y | |
| git | |
| cmake | |
| flex | |
| bison | |
| crossbuild-essential-${{matrix.arch}} | |
| libelf-dev:${{matrix.arch}} | |
| libusb-dev:${{matrix.arch}} | |
| libusb-1.0-0-dev:${{matrix.arch}} | |
| libhidapi-dev:${{matrix.arch}} | |
| libftdi1-dev:${{matrix.arch}} | |
| libreadline-dev:${{matrix.arch}} | |
| libserialport-dev:${{matrix.arch}} | |
| libgpiod-dev:${{matrix.arch}} | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D DEBUG_CMAKE=1 | |
| -D HAVE_LINUXGPIO=1 | |
| -D HAVE_LINUXSPI=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -D CMAKE_SYSTEM_NAME=Linux | |
| -D CMAKE_SYSTEM_PROCESSOR=${{matrix.processor}} | |
| -D CMAKE_C_COMPILER=${{matrix.prefix}}-gcc | |
| -D CMAKE_FIND_ROOT_PATH=/usr/${{matrix.prefix}} | |
| -D CMAKE_INCLUDE_PATH=/usr/include/${{matrix.inc-lib}} | |
| -D CMAKE_LIBRARY_PATH=/usr/lib/${{matrix.inc-lib}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-linux-${{matrix.processor}} | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-linux-${{matrix.processor}} | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| macos-x86_64: | |
| runs-on: macos-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| # brew update | |
| brew install | |
| cmake | |
| flex | |
| bison | |
| libelf | |
| libusb | |
| libusb-compat | |
| hidapi | |
| libftdi | |
| readline | |
| libserialport | |
| pkg-config | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -D CMAKE_C_FLAGS=-I/opt/homebrew/include | |
| -D CMAKE_EXE_LINKER_FLAGS=-L/opt/homebrew/Cellar | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e build/src/avrdude -c '-C build/src/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: sudo cmake --build build --target install | |
| - name: "Dryrun test (installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-macos-x86_64 | |
| path: | | |
| build/ | |
| !**/*.d | |
| !**/*.o | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-macos-x86_64 | |
| path: | | |
| build/src/avrdude | |
| build/src/avrdude.conf | |
| macos-x86_64-autotools: | |
| runs-on: macos-latest | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| run: >- | |
| # brew update | |
| brew install | |
| automake | |
| autoconf | |
| libtool | |
| gettext | |
| flex | |
| bison | |
| libelf | |
| libusb | |
| hidapi | |
| libftdi | |
| readline | |
| libserialport | |
| pkg-config | |
| - name: Configure | |
| run: >- | |
| autoreconf -vis src | |
| mkdir _ambuild && cd _ambuild | |
| env | |
| CFLAGS="-I/opt/homebrew/include" LDFLAGS="-L/opt/homebrew/lib" | |
| ../src/configure | |
| - name: Build | |
| run: make -C _ambuild -j$(nproc) | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -e _ambuild/avrdude -c '-C _ambuild/avrdude.conf' -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Debug Information | |
| run: | | |
| (set -ex; for pkg in libelf libusb hidapi libftdi readline libserialport; do | |
| brew list "$pkg" | |
| done) | |
| ls -l /opt/homebrew/Cellar | |
| ls -l /opt/homebrew/bin | |
| ls -l /opt/homebrew/include | |
| ls -l /opt/homebrew/lib | |
| echo "PKG_CONFIG_PATH=$PKG_CONFIG_PATH" | |
| (set -ex; for pkg in libelf libusb-1.0 hidapi libftdi1 readline libserialport; do | |
| if test "x$pkg" = xreadline; then continue; fi | |
| pkg-config --cflags "$pkg" | |
| pkg-config --libs "$pkg" | |
| done) | |
| - name: Run the built avrdude before installing | |
| run: ./_ambuild/avrdude -? | |
| - name: Install | |
| run: sudo make -C _ambuild install | |
| - name: "Dryrun test (installed)" | |
| run: >- | |
| export DYLD_LIBRARY_PATH=/usr/local/lib | |
| printf "\n\n" | ./tools/test-avrdude -v -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| msvc: | |
| runs-on: windows-latest | |
| strategy: | |
| matrix: | |
| include: | |
| - { arch: x86, platform: Win32 } | |
| - { arch: x64, platform: x64 } | |
| # - { arch: arm64, platform: ARM64 } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install prerequisites | |
| # As Chocolatey is notoriously unreliable, install winflexbison3 directly from GitHub. | |
| # run: choco install winflexbison3 | |
| run: | | |
| curl https://github.com/lexxmark/winflexbison/releases/download/v2.5.24/win_flex_bison-2.5.24.zip --location --output winflexbison.zip | |
| unzip winflexbison.zip -d ${{github.workspace}}\winflexbison | |
| echo "${{github.workspace}}\winflexbison" | Out-File -FilePath $env:GITHUB_PATH -Encoding utf8 -Append | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -A ${{matrix.platform}} | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_SYSTEM_VERSION=11 | |
| -D CMAKE_C_FLAGS_RELWITHDEBINFO="/MT /GL /Zi /O2 /Ob1 /DNDEBUG" | |
| -D CMAKE_CXX_FLAGS_RELWITHDEBINFO="/MT /GL /Zi /O2 /Ob1 /DNDEBUG" | |
| -D CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO="/DEBUG /INCREMENTAL:NO /LTCG /OPT:REF /OPT:ICF" | |
| -D HAVE_LIBREADLINE=HAVE_LIBREADLINE-NOTFOUND | |
| -D USE_EXTERNAL_LIBS=1 | |
| -B build | |
| - name: Build | |
| run: cmake --build build --config ${{env.BUILD_TYPE}} | |
| - name: "Dryrun test (not installed)" | |
| run: Write-Host "`n`n" -NoNewline | bash tools/test-avrdude -v -t $env:TEMP -e build/src/RelWithDebInfo/avrdude.exe -c "-C build/src/RelWithDebInfo/avrdude.conf" -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| # Installing requires non-existing python312_d.lib from swig_avrdude.vcxproj | |
| #- name: Install | |
| # run: cmake --build build --target install | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-msvc-${{matrix.arch}} | |
| path: | | |
| build/ | |
| !**/_deps/ | |
| !**/*.obj | |
| - name: Move executables | |
| run: | | |
| mv build/src/RelWithDebInfo/avrdude.exe build/src | |
| mv build/src/RelWithDebInfo/avrdude.pdb build/src | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-msvc-${{matrix.arch}} | |
| path: | | |
| build/src/avrdude.exe | |
| build/src/avrdude.pdb | |
| build/src/avrdude.conf | |
| mingw: | |
| runs-on: windows-latest | |
| defaults: | |
| run: | |
| shell: msys2 {0} | |
| strategy: | |
| matrix: | |
| include: | |
| - { sys: mingw64, env: x86_64 } | |
| - { sys: ucrt64, env: ucrt-x86_64 } | |
| - { sys: clang64, env: clang-x86_64 } | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - uses: msys2/setup-msys2@v2 | |
| with: | |
| msystem: ${{matrix.sys}} | |
| update: true | |
| install: >- | |
| base-devel | |
| mingw-w64-${{matrix.env}}-gcc | |
| mingw-w64-${{matrix.env}}-cmake | |
| mingw-w64-${{matrix.env}}-python | |
| mingw-w64-${{matrix.env}}-swig | |
| mingw-w64-${{matrix.env}}-libelf | |
| mingw-w64-${{matrix.env}}-libusb | |
| mingw-w64-${{matrix.env}}-libusb-compat-git | |
| mingw-w64-${{matrix.env}}-hidapi | |
| mingw-w64-${{matrix.env}}-libftdi | |
| mingw-w64-${{matrix.env}}-libserialport | |
| mingw-w64-${{matrix.env}}-readline | |
| mingw-w64-${{matrix.env}}-ncurses | |
| mingw-w64-${{matrix.env}}-termcap | |
| - name: Configure | |
| run: >- | |
| cmake | |
| -G"MSYS Makefiles" | |
| -D DEBUG_CMAKE=1 | |
| -D CMAKE_BUILD_TYPE=${{env.BUILD_TYPE}} | |
| -B build | |
| - name: Build | |
| run: cmake --build build | |
| - name: "Dryrun test (not installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -t "$TEMP" -e build/src/avrdude.exe -c "-C build/src/avrdude.conf" -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Install | |
| run: cmake --build build --target install | |
| - name: "Dryrun test (installed)" | |
| run: printf "\n\n" | ./tools/test-avrdude -v -t "$TEMP" -d0 -p"-cdryrun -pm2560" -p"-cdryrun -pavr64du28" | |
| - name: Archive build artifacts | |
| if: always() | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: build-mingw-${{matrix.env}} | |
| path: | | |
| build/ | |
| - name: Archive executables | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: avrdude-mingw-${{matrix.env}} | |
| path: | | |
| build/src/avrdude.exe | |
| build/src/avrdude.conf |