Skip to content

apache/incubator-resilientdb-graphql

ResilientDB GraphQL

ResilientDB GraphQL Server

Get Prepared

(If you're using this for the first time, the steps below would be useful)

Install Ubuntu 20.04 on your local machine.

Once installed, go to File Explorer -> Linux -> Ubuntu 20.04.

Clone this repository.

Install python3 (version - 3.9+) and ensure pip is installed using the command.

sudo apt-get install python3-pip

Also make sure to install the venv module which creates a virtual Python environment that helps encapsulate the project's dependencies and prevents possible conflicts with the global Python environment. The command is:

sudo apt-get install -y python3.10-venv

Create a virtual environment:

python3 -m venv venv

Start a virtual environment:

source venv/bin/activate

Go back from the virtual environment when you no longer need it:

deactivate

Using the SDK

To use the SDK, you need to start a KV service first, which you can refer to the resilientdb repository and the blog.

Then you should start the crow http service, which may take a few minutes at the first time.

bazel build service/http_server:crow_service_main

bazel-bin/service/http_server/crow_service_main service/tools/config/interface/service.config service/http_server/server_config.config

After starting the crow service, you can optionally test it by using the curl command to send HTTP requests.

curl -X POST -d '{"id":"key1","value":"value1"}' 127.0.0.1:18000/v1/transactions/commit

curl 127.0.0.1:18000/v1/transactions/key1

The expected output of the two commands above are: id: key1 and {"id":"key1","value":"value1"}, respectively.

Start your virtual environment.

source venv/bin/activate

Run the requirements.txt command to install the SDK related dependencies.

pip3 install -r requirements.txt

Try the test script.

python3 test_sdk.py

You have successfully run the script if you see the output: The retrieved txn is successfully validated

GraphQL

(Optional) If there is an error while running any command relating to NexRes, this command below may help:

sudo apt-get install python3.10-distutils

Note: If there is an error with the pip version, use the command:

curl -sS https://bootstrap.pypa.io/get-pip.py | python3.10

Open a venv in the Ubuntu server and run the command:

source venv/bin/activate

sudo apt-get install cloud-init

Install the remaining dependencies in venv

python3 -m pip install strawberry-graphql

python3 -m pip install flask_cors

BUG FIX: in the case requirements.txt doesn't work, and the cloud-init version is not found, edit the file to be:

aiohttp==3.8.3
aiohttp-cors==0.7.0
aiosignal==1.3.1
anyio==3.6.2
ariadne==0.17.0
async-timeout==4.0.2
attrs==22.2.0
base58==2.1.0
certifi==2022.12.7
cffi==1.15.1
charset-normalizer==2.1.1
click==8.1.3
commonmark==0.9.1
cryptoconditions==0.8.1
cryptography==3.4.7
Flask==2.2.2
Flask-Cors==3.0.10
frozenlist==1.3.3
graphql-core==3.2.3
h11==0.14.0
idna==3.4
importlib-metadata==5.2.0
itsdangerous==2.1.2
Jinja2==3.1.2
libcst==0.4.9
MarkupSafe==2.1.1
multidict==6.0.4
mypy-extensions==0.4.3
pyasn1==0.4.8
pycparser==2.21
Pygments==2.14.0
PyNaCl==1.4.0
pysha3==1.0.2
python-dateutil==2.8.2
python-multipart==0.0.5
python-rapidjson==1.8
PyYAML==6.0
requests==2.28.1
rich==13.0.1
six==1.16.0
sniffio==1.3.0
starlette==0.23.1
strawberry-graphql==0.152.0
typing-inspect==0.8.0
typing_extensions==4.4.0
urllib3==1.26.13
uvicorn==0.20.0
Werkzeug==2.2.2
yarl==1.8.2
zipp==3.11.0
  • You may get an error that says Running setup.py install for <dependency> did not run successfully.
  • First, try pip3 install wheel or pip install wheel
  • Next, install all missing dependencies manually
    • NOTE as long as you still have dependencies to install, you will get an error message, but this is okay!
    • From the stack trace, identify the module, then use pip install <dependency>
    • keep generating errors by running python3 app.py every time, and resolve each missing dependency
  • Ex:
Traceback (most recent call last):
File "/home/user/repos/NexresGraphQL/app.py", line 1, in <module>
from resdb_driver import Resdb
File "/home/user/repos/NexresGraphQL/resdb_driver/__init__.py", line 1, in <module>
from .driver import Resdb
File "/home/user/repos/NexresGraphQL/resdb_driver/driver.py", line 4, in <module>
from .offchain import prepare_transaction, fulfill_transaction
File "/home/user/repos/NexresGraphQL/resdb_driver/offchain.py", line 8, in <module>
from .transaction import Input, Transaction, TransactionLink, _fulfillment_from_details
File "/home/user/repos/NexresGraphQL/resdb_driver/transaction.py", line 14, in <module>
import base58
ModuleNotFoundError: No module named 'base58'
  • In the last line, you can run pip install base58
  • Keep running python3 app.py until you get to the broken dependency (ex: pysha3, sha3), then try running sudo apt-get install python3.10-dev
  • Hopefully, all your dependencies should be installed, and running python3 app.py will run the server!

Start the app using:

python3 app.py

This would be hosted on your local server to test the React App/Frontend. Also, this would give info on the console about the POST command, which are used to create an account. This consists of 3 stages: publicKey. AES encrypted private key and decrypted privateKey

Note: To run Ubuntu virtual instance, open Command Prompt, then type ubuntu2004 to open an instance

Serve GraphQL Using Nginx

Install the Nginx web server package:

sudo apt-get install nginx -y

Once the Nginx is installed, start and enable the Nginx service using the following command:

systemctl start nginx
systemctl enable nginx

Activate your virtual environment and install Gunicorn and Flask:

source venv/bin/activate
pip install wheel
pip install gunicorn flask

Verify whether Gunicorn can serve the application correctly using the command below:

gunicorn --bind 0.0.0.0:5000 wsgi:app

If everything is fine, you should get the following output:

[2023-10-06 22:28:11 +0000] [24074] [INFO] Starting gunicorn 21.2.0
[2023-10-06 22:28:11 +0000] [24074] [INFO] Listening at: http://0.0.0.0:5000 (24074)
[2023-10-06 22:28:11 +0000] [24074] [INFO] Using worker: sync
[2023-10-06 22:28:11 +0000] [24075] [INFO] Booting worker with pid: 24075

Press CTRL+C to stop the application. And deactivate the virtual environment.

deactivate

Next, you will need to create a systemd unit file for the Flask application:

sudo vim /etc/systemd/system/flask.service

Add the following lines:

[Unit]
Description=Gunicorn instance to serve Flask
After=network.target
[Service]
User=root
Group=www-data
WorkingDirectory=\{Your Absolute Path to this Folder\}
Environment="PATH=\{Your Absolute Path to this Folder\}/venv/bin"
ExecStart=\{Your Absolute Path to this Folder\}/venv/bin/gunicorn --bind 0.0.0.0:8000 wsgi:app
[Install]
WantedBy=multi-user.target

Next, reload the systemd daemon with the following command:

sudo systemctl daemon-reload

Next, start the flask service and enable it to start at system reboot:

sudo systemctl start flask
sudo systemctl enable flask

Next, verify the status of the flask with the following command:

sudo systemctl status flask

Output:

● flask.service - Gunicorn instance to serve Flask
 Loaded: loaded (/etc/systemd/system/flask.service; enabled; vendor preset: enabled)
 Active: active (running) since Fri 2023-10-06 22:20:00 UTC; 14min ago
Main PID: 23745 (gunicorn)
  Tasks: 2 (limit: 38067)
 Memory: 40.6M
 CGroup: /system.slice/flask.service
         ├─23745 /home/ubuntu/ResilientDB-GraphQL/venv/bin/python3 /home/ubuntu/ResilientDB-GraphQL/venv/b>
         └─23747 /home/ubuntu/ResilientDB-GraphQL/venv/bin/python3 /home/ubuntu/ResilientDB-GraphQL/venv/b>

Next, you will need to configure Nginx as a reverse proxy to serve the Flask application through port 80. To do so, create an Nginx virtual host configuration file:

sudo vim /etc/nginx/conf.d/flask.conf

Add the following lines:

server {
    listen 80;
    server_name {The public IP address of your machine};
    location / {
        proxy_pass http://127.0.0.1:8000;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
    }
}

Save and close the file then verify the Nginx for any syntax error:

sudo nginx -t

You should see the following output:

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

Finally, restart the Nginx service to apply the changes:

sudo systemctl restart nginx

Then, test with:

{The public IP address of your machine}/graphql

About

ResilientDB GraphQL Server

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages