-
Notifications
You must be signed in to change notification settings - Fork 49
TODO
Benjamin Vernoux edited this page Oct 7, 2021
·
17 revisions
This TODO list is mainly for brainstorming and when items will be clearly defined each item will move to https://github.com/airspy/firmware/issues and affected to someone to avoid doing same things in //
- Add get_samplerates(0) (return number of samples rates) and get_samplerates(nb_samplerates) commands.
- Change configuration M4, M0 and group all the config in 1 file and 1 structure in a fixed addr in FLASH and copied to a fixed addr in SRAM at start.
- Implement EXT Clock 1pps detection/selection at boot in SI5351C.
- Add support of calibration for AirSpy NOS R0/R2 and AirSpy Mini
- Packing ADC samples from 16bits to 12bits in order to use less USB bandwidth (1/4), this requires host side to Unpack from 12 to 16bits at reception.
- Add frame counter and ADC Status on each frame (using special packing command)
- Modify usb_vendor_request_write_spiflash()/usb_vendor_request_read_spiflash() to usb_vendor_request_write()/usb_vendor_request_read() which write/read in SRAM/Peripheral/SPIFlash depending on dest addr.
- SAFE Firmware flasher:
- Do all check in host (after write readback the firmware from spiflash) (with a CRC32 or MD5 file with same name as the firmware to flash) and do not modify firmware except requires implementation of 1.
- Implement reset command.
- Merge multiple sample rate config:
- Idea1: Challenge Needs to change SI5351C LPC clock(main clock), so need to reconfigure ALL clocks like after a reset but without resetting USB0 Clock !!
- Potential problems:
- Random bug with USB lockup on PC side or FW side.. (ultra hard to debug) Due to reconfiguration of USB0 PLL (as it is required to reconfigure it)
- LPC random freeze during reconfiguration of PLL1 (already seen).
- Potential problems:
- Idea2: For each new sample rate set a variable with a signature in fixed SRAM addr and reboot, at boot check that signature and use the value to configure the system.
- Potential problems:
- No problem on firmware side ultra clean and simple.
- On Host side lib airspy shall manage that new feature and close then reopen the device in a transparent way (as there is a new USB enumeration due to reboot).
- Potential problems:
- Idea1: Challenge Needs to change SI5351C LPC clock(main clock), so need to reconfigure ALL clocks like after a reset but without resetting USB0 Clock !!