🎉 Run ci checks for Migrate Hellobaton Source Connector to Low Code

airbyte-integrations/connectors/source-hellobaton/.dockerignore

@@ -1,6 +1,5 @@
 *
 !Dockerfile
-!Dockerfile.test
 !main.py
 !source_hellobaton
 !setup.py

airbyte-integrations/connectors/source-hellobaton/Dockerfile

@@ -34,5 +34,5 @@ COPY source_hellobaton ./source_hellobaton
 ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
 ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
 
-LABEL io.airbyte.version=0.1.0
+LABEL io.airbyte.version=0.2.0
 LABEL io.airbyte.name=airbyte/source-hellobaton

airbyte-integrations/connectors/source-hellobaton/README.md

@@ -1,35 +1,10 @@
 # Hellobaton Source
 
-This is the repository for the Hellobaton source connector, written in Python.
-For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/hellobaton).
+This is the repository for the Hellobaton configuration based source connector.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/hellobaton).
 
 ## Local development
 
-### Prerequisites
-**To iterate on this connector, make sure to complete this prerequisites section.**
-
-#### Minimum Python version required `= 3.7.0`
-
-#### Build & Activate Virtual Environment and install dependencies
-From this connector directory, create a virtual environment:
-```
-python -m venv .venv
-```
-
-This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
-development environment of choice. To activate it from the terminal, run:
-```
-source .venv/bin/activate
-pip install -r requirements.txt
-pip install '.[tests]'
-```
-If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
-
-Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
-used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
-If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
-should work as you expect.
-
 #### Building via Gradle
 You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
 
@@ -39,22 +14,14 @@ To build using Gradle, from the Airbyte repository root, run:
 ```
 
 #### Create credentials
-**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/hellobaton)
-to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_hellobaton/spec.json` file.
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/hellobaton)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_hellobaton/spec.yaml` file.
 Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
 See `integration_tests/sample_config.json` for a sample config file.
 
 **If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source hellobaton test creds`
 and place them into `secrets/config.json`.
 
-### Locally running the connector
-```
-python main.py spec
-python main.py check --config secrets/config.json
-python main.py discover --config secrets/config.json
-python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
-```
-
 ### Locally running the connector docker image
 
 #### Build
@@ -79,32 +46,15 @@ docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-hellobaton:dev discove
 docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-hellobaton:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
 ```
 ## Testing
-Make sure to familiarize yourself with [pytest test discovery](https://docs.pytest.org/en/latest/goodpractices.html#test-discovery) to know how your test files and methods should be named.
-First install test dependencies into your virtual environment:
-```
-pip install .[tests]
-```
-### Unit Tests
-To run unit tests locally, from the connector directory run:
-```
-python -m pytest unit_tests
-```
 
-### Integration Tests
-There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).
-#### Custom Integration tests
-Place custom tests inside `integration_tests/` folder, then, from the connector root, run
-```
-python -m pytest integration_tests
-```
 #### Acceptance Tests
-Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.io/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
 If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
-To run your integration tests with acceptance tests, from the connector root, run
+
+To run your integration tests with Docker, run:
 ```
-python -m pytest integration_tests -p integration_tests.acceptance
+./acceptance-test-docker.sh
 ```
-To run your integration tests with docker
 
 ### Using gradle to run tests
 All commands should be run from airbyte project root.

airbyte-integrations/connectors/source-hellobaton/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-hellobaton/acceptance-test-config.yml

@@ -1,20 +1,29 @@
 # See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference)
 # for more information about how to configure these tests
 connector_image: airbyte/source-hellobaton:dev
-tests:
+acceptance_tests:
   spec:
-    - spec_path: "source_hellobaton/spec.json"
+    tests:
+      - spec_path: "source_hellobaton/spec.yaml"
+        backward_compatibility_tests_config:
+          disable_for_version: "0.1.0"
   connection:
-    - config_path: "secrets/config.json"
-      status: "succeed"
-    - config_path: "integration_tests/invalid_config.json"
-      status: "failed"
+    tests:
+      - config_path: "secrets/config.json"
+        status: "succeed"
+      - config_path: "integration_tests/invalid_config.json"
+        status: "failed"
   discovery:
-    - config_path: "secrets/config.json"
+    tests:
+      - config_path: "secrets/config.json"
   basic_read:
-    - config_path: "secrets/config.json"
-      configured_catalog_path: "integration_tests/configured_catalog.json"
-      empty_streams: ["templates", "time_entries"]
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"
+        empty_streams:
+          - name: "templates"
+          - name: "time_entries"
   full_refresh:
-    - config_path: "secrets/config.json"
-      configured_catalog_path: "integration_tests/configured_catalog.json"
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"

airbyte-integrations/connectors/source-hellobaton/acceptance-test-docker.sh

@@ -1,2 +1,3 @@
 #!/usr/bin/env sh
+
 source "$(git rev-parse --show-toplevel)/airbyte-integrations/bases/connector-acceptance-test/acceptance-test-docker.sh"

airbyte-integrations/connectors/source-hellobaton/integration_tests/__init__.py

@@ -1,3 +1,3 @@
 #
-# Copyright (c) 2021 Airbyte, Inc., all rights reserved.
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
 #

airbyte-integrations/connectors/source-hellobaton/metadata.yaml

@@ -1,24 +1,28 @@
 data:
+  allowedHosts:
+    hosts:
+      - ${company}.hellobaton.com
+  registries:
+    oss:
+      enabled: true
+    cloud:
+      enabled: false
   connectorSubtype: api
   connectorType: source
   definitionId: 492b56d1-937c-462e-8076-21ad2031e784
-  dockerImageTag: 0.1.0
+  dockerImageTag: 0.2.0
   dockerRepository: airbyte/source-hellobaton
   githubIssueLabel: source-hellobaton
   icon: hellobaton.svg
   license: MIT
   name: Hellobaton
-  registries:
-    cloud:
-      enabled: false
-    oss:
-      enabled: true
+  releaseDate: 2022-01-14
   releaseStage: alpha
-  documentationUrl: https://docs.airbyte.com/integrations/sources/baton
+  supportLevel: community
+  documentationUrl: https://docs.airbyte.com/integrations/sources/hellobaton
   tags:
-    - language:python
+    - language:low-code
   ab_internal:
     sl: 100
     ql: 100
-  supportLevel: community
 metadataSpecVersion: "1.0"

airbyte-integrations/connectors/source-hellobaton/setup.py

@@ -11,7 +11,7 @@
 
 TEST_REQUIREMENTS = [
     "requests-mock~=1.9.3",
-    "pytest~=6.1",
+    "pytest~=6.2",
     "pytest-mock~=3.6.1",
 ]
 
@@ -22,7 +22,7 @@
     author_email="[email protected]",
     packages=find_packages(),
     install_requires=MAIN_REQUIREMENTS,
-    package_data={"": ["*.json", "schemas/*.json", "schemas/shared/*.json"]},
+    package_data={"": ["*.json", "*.yaml", "schemas/*.json", "schemas/shared/*.json"]},
     extras_require={
         "tests": TEST_REQUIREMENTS,
     },

airbyte-integrations/connectors/source-hellobaton/source_hellobaton/__init__.py

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2021 Airbyte, Inc., all rights reserved.
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
 #